# System Variable Differences Between MariaDB 10.3 and MySQL 5.7 The following is a comparison of variables that either appear only in [MariaDB 10.3](https://mariadb.com/docs/release-notes/community-server/old-releases/10.3/what-is-mariadb-103) or MySQL 5.7, or have different default settings in [MariaDB 10.3](https://mariadb.com/docs/release-notes/community-server/old-releases/10.3/what-is-mariadb-103), and MySQL 5.7. [MariaDB 10.3.10](https://mariadb.com/docs/release-notes/community-server/old-releases/10.3/10.3.10) and MySQL 5.7.13, with only default plugins enabled, were used for the comparison. The most notable differences are that MariaDB includes, by default, the [Aria](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria) storage engine (resulting in extra memory allocation), [Galera Cluster](https://github.com/mariadb-corporation/docs-release-notes/blob/test/kb/en/galera/README.md), and has a different [thread pool implementation](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). For this reason, a default implementation of [MariaDB 10.3](https://mariadb.com/docs/release-notes/community-server/old-releases/10.3/what-is-mariadb-103) will use more memory than MySQL 5.7. [MariaDB 10.3](https://mariadb.com/docs/release-notes/community-server/old-releases/10.3/what-is-mariadb-103) and MySQL 5.7 also have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). MariaDB's extra memory usage can be handled with the following rules of thumb: * If you are not using [MyISAM](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine) and don't plan to use [Aria](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria): * Set [key\_buffer\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine/myisam-system-variables#key_buffer_size) to something very low (16K) as it's not used. * Set [aria\_pagecache\_buffer\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria/aria-system-variables#aria_pagecache_buffer_size) to what you think you need for handling internal tmp tables that didn't fit in memory. * Normally this is what before you had set for [key\_buffer\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine/myisam-system-variables#key_buffer_size) (at least 1M). * If you are using [MyISAM](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine) and not planning to use [Aria](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria): * Set [aria\_pagecache\_buffer\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria/aria-system-variables#aria_pagecache_buffer_size) to what you think you need for handling internal tmp tables that didn't fit in memory. * If you are planning to use [Aria](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria), you should set [aria\_pagecache\_buffer\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria/aria-system-variables#aria_pagecache_buffer_size) to something that fits a big part of your normal data + overflow temporary tables. ## Comparison Table | Variable | [MariaDB 10.3](https://mariadb.com/docs/release-notes/community-server/old-releases/10.3/what-is-mariadb-103) Default | MySQL 5.7 Default | Notes | | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | [alter\_algorithm](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#alter_algorithm) | DEFAULT | - | [MariaDB 10.3](https://mariadb.com/docs/release-notes/community-server/old-releases/10.3/what-is-mariadb-103) introduces new [ALTER TABLE ALGORITHM](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/sql-statements/data-definition/alter/alter-table#algorithm) clauses to avoid slow copies in certain instances. This variable allows setting this if no ALGORITHM clause is specified. . | | [aria\_\*](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria/aria-system-variables) | \* | - | The Aria storage engine is only available in MariaDB. | | avoid\_temporal\_upgrade | - | OFF | MySQL-only variable for determining whether ALTER TABLE implicitly upgrades temporal columns. | | [binlog-annotate-row-events](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/clients-and-utilities/logging-tools/mariadb-binlog/annotate_rows_log_event#master-option-binlog-annotate-row-events) | ON | - | Introduced in [MariaDB 5.3](https://mariadb.com/docs/release-notes/community-server/old-releases/5.3/changes-improvements-in-mariadb-5-3) for [replicating](https://github.com/mariadb-corporation/docs-server/blob/test/release-notes/compatibility-and-differences/system-variable-differences-between-mariadb-and-mysql/system-variable-differences-between-mariadb-and-mysql-unmaintained-series/broken-reference/README.md) between [MariaDB 5.3](https://mariadb.com/docs/release-notes/community-server/old-releases/5.3/changes-improvements-in-mariadb-5-3) and MySQL/[MariaDB 5.1](https://mariadb.com/docs/release-notes/community-server/old-releases/5.1/changes-improvements-in-mariadb-5-1). | | [binlog\_commit\_wait\_count](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 0 | - | For use in MariaDB's [parallel replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/parallel-replication). | | [binlog\_commit\_wait\_usec](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 100000 | - | For use in MariaDB's [parallel replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/parallel-replication). | | binlog\_error\_action | | ABORT\_SERVER | MySQL-only variable for controlling what happens when the server cannot write to the binary log. | | [binlog\_file\_cache\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 16184 | - | For setting the size of the file cache for the [binary log](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/binary-log). | | [binlog\_format](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | MIXED | ROW | MariaDB and MySQL have differing [binary log formats](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/binary-log/binary-log-formats). | | binlog\_group\_commit\_sync\_delay | | 0 | MySQL-only variable for controlling the wait time before synchronizing the binary log file to disk. | | binlog\_group\_commit\_sync\_no\_delay\_count | | 0 | MySQL-only variable for setting the maximum number of transactions to wait for before aborting the current binlog\_group\_commit\_sync\_delay delay. | | binlog\_gtid\_simple\_recovery | - | ON | MySQL-only GTID variable. MariaDB's [GTID](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid) implementation is different. | | binlog\_max\_flush\_queue\_time | - | 0 | MySQL-only variable specifying a timeout for reading transactions from the flush queue before continuing with group commit and syncing log to disk. | | [binlog\_optimize\_thread\_scheduling](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | ON | - | For optimized kernel thread scheduling. | | binlog\_order\_commits | - | ON | MySQL-only variable for determining whether transactions may be committed in parallel. | | binlog\_rows\_query\_log\_events | - | OFF | MySQL-only variable for logging extra information in row-based logging. | | block\_encryption\_mode | - | aes-128-ecb | MySQL-only variable for controlling the block encryption mode for block-based algorithms. | | [check\_constraint\_checks](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#check_constraint_checks) | ON | - | Permits disabling constraint checks, for example when loading a table that violates some constraints that you plan to fix later. | | check\_proxy\_users | | OFF | MySQL-only variable for controlling whether the server performs proxy user mapping for authentication plugins. | | [column\_compression\_threshold](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/optimization-and-tuning-compression/storage-engine-independent-column-compression#column_compression_threshold) | 100 | - | MariaDB supports [Storage-engine Independent Column Compression](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/optimization-and-tuning-compression/storage-engine-independent-column-compression). | | [column\_compression\_zlib\_level](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/optimization-and-tuning-compression/storage-engine-independent-column-compression#column_compression_zlib_level) | 6 | - | MariaDB supports [Storage-engine Independent Column Compression](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/optimization-and-tuning-compression/storage-engine-independent-column-compression). | | [column\_compression\_zlib\_strategy](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/optimization-and-tuning-compression/storage-engine-independent-column-compression#column_compression_zlib_strategy) | DEFAULT\_STRATEGY | - | MariaDB supports [Storage-engine Independent Column Compression](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/optimization-and-tuning-compression/storage-engine-independent-column-compression). | | [column\_compression\_zlib\_wrap](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/optimization-and-tuning-compression/storage-engine-independent-column-compression#column_compression_zlib_wrap) | OFF | - | MariaDB supports [Storage-engine Independent Column Compression](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/optimization-and-tuning-compression/storage-engine-independent-column-compression). | | [deadlock\_search\_depth\_long](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria/aria-system-variables#deadlock_search_depth_long) | 15 | - | The Aria storage engine is only available in MariaDB. | | [deadlock\_search\_depth\_short](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria/aria-system-variables#deadlock_search_depth_short) | 4 | - | The Aria storage engine is only available in MariaDB. | | [deadlock\_timeout\_long](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria/aria-system-variables#deadlock_timeout_long) | 50000000 | - | The Aria storage engine is only available in MariaDB. | | [deadlock\_timeout\_short](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/aria/aria-system-variables#deadlock_timeout_short) | 10000 | - | The Aria storage engine is only available in MariaDB. | | [debug\_no\_thread\_alarm](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#debug_no_thread_alarm) | OFF | - | Disable system thread alarm calls, for debugging or testing. | | default\_authentication\_plugin | | mysql\_native\_password | MySQL's default authentication plugin. | | [default\_master\_connection](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | empty | - | For use with MariaDB's [multi-source replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/multi-source-replication). | | default\_password\_lifetime | | 0 | MySQL-only variable determining how long passwords are valid for before expiring. | | [default\_regex\_flags](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#default_regex_flags) | empty | - | For handling incompatibilities between MariaDB's [PCRE](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/sql-functions/string-functions/regular-expressions-functions/pcre) and the old regex library. | | [default\_tmp\_storage\_engine](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#default_tmp_storage_engine) | empty | InnoDB | Default storage engine used for tables created with [CREATE TEMPORARY TABLE](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/tables/create-table). | | disabled\_storage\_engines | | empty | MySQL-only variable for disabling specific storage engines. | | disconnect\_on\_expired\_password | - | ON | MySQL permits passwords to be expired. | | [encrypt\_binlog](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables#encrypt_binlog) | OFF | - | MariaDB enables [table and tablespace encryption](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/security/encryption/data-at-rest-encryption/data-at-rest-encryption-overview). | | [encrypt\_tmp\_files](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#encrypt_tmp_files) | OFF | - | MariaDB enables [table and tablespace encryption](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/security/encryption/data-at-rest-encryption/data-at-rest-encryption-overview). | | [encrypt\_tmp\_disk\_tables](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#encrypt_tmp_disk_tables) | OFF | - | MariaDB enables [table and tablespace encryption](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/security/encryption/data-at-rest-encryption/data-at-rest-encryption-overview). | | end\_markers\_in\_json | - | OFF | MySQL-only variable for adding end markers to JSON output. | | enforce\_gtid\_consistency | - | OFF | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [enforce\_storage\_engine](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#enforce_storage_engine) | none | | Forces the use of a particular storage engine for new tables. | | [eq\_range\_index\_dive\_limit](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#eq_range_index_dive_limit) | 0 | 200 | Variable for tuning when the optimizer should switch from using index dives to index statistics for qualifying rows estimation. | | [expensive\_subquery\_limit](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#expensive_subquery_limit) | 100 | - | Used for determining expensive queries for optimization. | | [extra\_max\_connections](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-system-status-variables) | 1 | - | Introduced in the [MariaDB 5.1 threadpool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb-51-53). | | [extra\_port](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-system-status-variables) | 0 | - | Introduced in the [MariaDB 5.1 threadpool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb-51-53). | | [group\_concat\_max\_len](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#group_concat_max_len) | 1048576 | 1024 | MariaDB increases the maximum length for a [GROUP\_CONCAT()](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/sql-functions/aggregate-functions/group_concat) result from 1K to 1M. | | [gtid\_binlog\_pos](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid) | empty | - | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [gtid\_binlog\_state](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid) | empty | - | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [gtid\_current\_pos](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid) | empty | - | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [gtid\_domain\_id](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid) | 0 | - | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | gtid\_executed | - | empty | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | gtid\_executed\_compression\_period | - | 1000 | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [gtid\_ignore\_duplicates](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid) | OFF | - | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | gtid\_mode | - | OFF | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | gtid\_next | - | AUTOMATIC | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | gtid\_owned | - | empty | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [gtid\_pos\_auto\_engines](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid#gtid_pos_auto_engines) | empty | - | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | gtid\_purged | - | empty | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [gtid\_seq\_no](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid) | 0 | - | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [gtid\_slave\_pos](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid) | empty | - | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [gtid\_strict\_mode](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid) | OFF | - | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [have\_openssl](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/security/encryption/data-in-transit-encryption/ssltls-system-variables) | | | MariaDB's version indicates whether YaSSL or openssl was used. MySQL's is a synonym for have\_ssl. | | have\_statement\_timeout | - | | MySQL's statement execution timeout feature is available. | | [histogram\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#histogram_size) | 0 | - | MariaDB introduced [Histogram-based Statistics](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/query-optimizations/statistics-for-optimizing-queries/histogram-based-statistics). | | [histogram\_type](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#histogram_type) | SINGLE\_PREC\_HB | - | MariaDB introduced [Histogram-based Statistics](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/query-optimizations/statistics-for-optimizing-queries/histogram-based-statistics). | | [idle\_readonly\_transaction\_timeout](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#idle_readonly_transaction_timeout) | 0 | - | Time in seconds that the server waits for idle read-only transactions. | | [idle\_transaction\_timeout](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#idle_transaction_timeout) | 0 | - | Time in seconds that the server waits for idle transactions. | | [idle\_write\_transaction\_timeout](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#idle_write_transaction_timeout) | 0 | - | Time in seconds that the server waits for idle write transactions. | | [in\_transaction](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#in_transaction) | 0 | - | Set to 1 if you are in a transaction, and 0 if not. | | [innodb\_\*](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/innodb/innodb-system-variables) | \* | \* | The list of differences between [MariaDB 10.3](https://mariadb.com/docs/release-notes/community-server/old-releases/10.3/what-is-mariadb-103) and MySQL 5.7 Innodb variables is currently incomplete. | | [innodb\_fast\_shutdown](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/innodb/innodb-system-variables) | 1 | 1 | MariaDB has an extra mode, 3, for skipping the rollback of connected transactions. | | [innodb\_log\_optimize\_ddl](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/innodb/innodb-system-variables) | ON | - | Whether redo logging should be reduced when natively creating indexes or rebuilding tables | | internal\_tmp\_disk\_storage\_engine | - | INNODB | MySQL uses this variable to set the storage engine for on-disk internal temporary tables. | | [join\_buffer\_space\_limit](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#join_buffer_space_limit) | 2097152 | - | Maximum size in bytes of the query buffer. See [block-based join algorithms](https://mariadb.com/docs/release-notes/community-server/about/compatibility-and-differences/system-variable-differences-between-mariadb-and-mysql/system-variable-differences-between-mariadb-and-mysql-unmaintained-series/broken-reference).. | | [join\_cache\_level](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#join_cache_level) | 2 | - | For determining the join algorithms. See [block-based join algorithms](https://mariadb.com/docs/release-notes/community-server/about/compatibility-and-differences/system-variable-differences-between-mariadb-and-mysql/system-variable-differences-between-mariadb-and-mysql-unmaintained-series/broken-reference). | | [key\_buffer\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine/myisam-system-variables#key_buffer_size) | 134217728 | 8388608 | Size of the buffer for the index blocks used by MyISAM tables and shared for all threads. | | [key\_cache\_file\_hash\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine/myisam-system-variables#key_cache_file_hash_size) | 512 | - | Number of hash buckets for open and changed files. | | [key\_cache\_segments](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine/myisam-system-variables#key_cache_segments) | 0 | - | The number of segments in a key cache. See [Segmented Key Cache](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/system-variables/segmented-key-cache). | | [last\_gtid](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid#last_gtid) | - | empty | MariaDB and MySQL have different [GTID implementations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/gtid). | | [lock\_wait\_timeout](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#lock_wait_timeout) | 86400 | 31536000 | MariaDB has reduced the timeout for acquiring metadata locks. | | [log\_bin\_compress](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | OFF | - | MariaDB setting for whether or not the [binary log](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/binary-log) can be compressed. | | [log\_bin\_compress\_min\_len](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 256 | - | Minimum length of sql statement (in statement mode) or record (in row mode) that can be compressed. See [Compressing Events to Reduce Size of the Binary Log](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/binary-log/compressing-events-to-reduce-size-of-the-binary-log). | | log\_bin\_use\_v1\_row\_events | - | OFF | MySQL-only variable showing whether or not MySQL's version 2 binary logging format is being used. | | log\_builtin\_as\_identified\_by\_password | - | OFF | MySQL variable for use with binary logging of user-management statements, | | [log\_disabled\_statements](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#log_disabled_statements) | sp | - | Disable logging of certain statements to the [general log](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/general-query-log). | | log\_error\_verbosity | - | 3 | MySQL variable for setting verbosity of error, warning, and note messages in the error log. | | [log\_slow\_admin\_statements](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#log_slow_admin_statements) | ON | OFF | MariaDB logs slow admin statements to the [slow query log](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/slow-query-log) by default. | | [log\_slow\_filter](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#log_slow_filter) | admin, filesort, filesort\_on\_disk, full\_join, full\_scan, query\_cache, query\_cache\_miss, tmp\_table, tmp\_table\_on\_disk | - | For slow query log filtering. | | [log\_slow\_rate\_limit](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#log_slow_rate_limit) | 1 | - | Limits the number of queries logged to the [slow query log](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/slow-query-log). | | [log\_slow\_slave\_statements](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | ON | OFF | MariaDB logs slow slave statements to the [slow query log](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/slow-query-log) by default. | | [log\_slow\_verbosity](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#log_slow_verbosity) | empty | - | Controls information to be added to the [slow query log](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/slow-query-log). See also [Slow Query Log Extended Statistics](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/query-optimizations/statistics-for-optimizing-queries/slow-query-log-extended-statistics). | | log\_statements\_unsafe\_for\_binlog | - | ON | MySQL setting for controlling whether binlog warnings are written to the error log. | | log\_syslog\* | platform-dependent | - | MySQL variables with settings for writing to syslog. | | [log\_tc\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#log_tc_size) | 24576 | - | Size in bytes of the transaction coordinator log, defined in multiples of 4096. | | log\_throttle\_queries\_not\_using\_indexes | - | 0 | MySQL-only variable for limiting the number of statements without indexes written to the slow query log. | | log\_timestamps | - | UTC | MySQL-only variable controlling the timezone for certain logging conditions. | | master\_info\_repository | - | FILE | MySQL-only variable determining whether the slaves log info to file or table. | | [max\_allowed\_packet](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#max_allowed_packet) | 16M | 4M | | | max\_execution\_time | - | 0 | MySQL renamed the max\_statement\_time variable. | | [max\_long\_data\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#max_long_data_size) | 16777216 | - | Maximum size for parameter values sent with mysql\_stmt\_send\_long\_data(). Removed in MySQL 5.6. | | max\_points\_in\_geometry | - | 65536 | Maximum points\_per\_circle for MySQL's ST\_Buffer\_Strategy() function. | | [max\_recursive\_iterations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#max_recursive_iterations) | 4294967295 | - | Maximum number of iterations when executing recursive queries. | | [max\_relay\_log\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 1073741824 | 0 | Can be set by session in MariaDB. | | [max\_seeks\_for\_key](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#max_seeks_for_key) | 4294967295 | 4294967295 (32-bit) or 18446744073709547520 (64-bit) | The most key seeks required when searching with an index, regardless of the actual index cardinality. If this value is set lower than its default and maximum, indexes will tend to be preferred over table scans. | | [max\_session\_mem\_used](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#max_session_mem_used) | 9223372036854775807 | - | Amount of memory a single user session is allowed to allocate. | | [max\_statement\_time](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#max_statement_time) | 0 | - | Maximum time in seconds that a query can execute before being aborted. MySQL used to have a variable of this name before renaming it max\_execution\_time. | | [max\_write\_lock\_count](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#max_write_lock_count) | 4294967295 | 4294967295 (32-bit) or 18446744073709547520 (64-bit) | Read lock requests will be permitted for processing after this many write locks. | | [mrr\_buffer\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#mrr_buffer_size) | 262144 | - | Size of buffer to use when using multi-range read with range access. See [Multi Range Read optimization](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/mariadb-internal-optimizations/multi-range-read-optimization#range-access). | | [myisam\_block\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine/myisam-system-variables#myisam_block_size) | 1024 | - | Block size used for [MyISAM](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine) index pages. | | [myisam\_recover\_options](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine/myisam-system-variables#myisam_recover_options) | BACKUP,QUICK | OFF | MyISAM recovery mode. | | [myisam\_sort\_buffer\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine/myisam-system-variables#myisam_sort_buffer_size) | 134216704 | 8388608 | Size in bytes of the buffer allocated when creating or sorting indexes on a MyISAM table. | | [mysql56\_temporal\_format](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-usage/storage-engines/myisam-storage-engine/myisam-system-variables#mysql56_temporal_format) | ON | | Causes MariaDB to use the MySQL-5.6 low level formats for [TIME](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/data-types/date-and-time-data-types/time), [DATETIME](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/data-types/date-and-time-data-types/datetime) and [TIMESTAMP](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/data-types/date-and-time-data-types/timestamp) instead of the [MariaDB 5.3](https://mariadb.com/docs/release-notes/community-server/old-releases/5.3/changes-improvements-in-mariadb-5-3)+ version. | | mysql\_native\_password\_proxy\_users | - | OFF | Whether MySQL's authentication plugin supports proxy users. I | | new | - | OFF | Used for backward-compatibility with MySQL 4.1, not present in MariaDB. | | ngram\_token\_size | - | 2 | Sets the n-gram token size for MySQL's n-gram full-text parser. | | offline\_mode | - | OFF | MySQL settting for specifying whether the server should run in offline mode. | | [old\_mode](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#old_mode) | Empty string | - | Used for getting MariaDB to emulate behavior from an old version of MySQL or MariaDB. See [OLD Mode](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/old_mode). | | [optimizer\_selectivity\_sampling\_limit](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#optimizer_selectivity_sampling_limit) | 100 | - | Controls number of record samples to check condition selectivity. | | [optimizer\_switch](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#optimizer_switch) | [See details](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#optimizer_switch) | | A series of flags for controlling the query optimizer. MariaDB has introduced a number of new settings. | | optimizer\_trace | - | Off by default | MySQL-only variable for optimizer tracing. | | optimizer\_trace\_features | - | Off by default | MySQL-only variable for optimizer tracing. | | optimizer\_trace\_limit | - | 1 | MySQL-only variable for optimizer tracing. | | optimizer\_trace\_max\_mem\_size | - | 16384 | MySQL-only variable for optimizer tracing. | | optimizer\_trace\_offset | - | -1 | MySQL-only variable for optimizer tracing. | | [optimizer\_use\_condition\_selectivity](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#optimizer_use_condition_selectivity) | 1 | - | Controls which statistics can be used by the optimizer when looking for the best query execution plan. | | parser\_max\_mem\_size | - | 4294967295 (32-bit) or 18446744073709547520 (64-bit) | MySQL variable for limiting memory available to the parser. | | [performance\_schema](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/system-tables/performance-schema/performance-schema-system-variables#performance_schema) | OFF | ON | The [Performance Schema](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/system-tables/performance-schema) is off by default in MariaDB. | | [performance\_schema\_\*](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/system-tables/performance-schema/performance-schema-system-variables) | | | Many performance schema variables are autoset in MySQL. | | [plugin\_maturity](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#plugin_maturity) | One less than the server maturity | - | Minimum acceptable plugin maturity. | | [progress\_report\_time](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#progress_report_time) | 5 | - | Time in seconds between sending progress reports to the client for time-consuming statements. | | [query\_alloc\_block\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#query_alloc_block_size) | 16384 | 8192 | Size in bytes of the extra blocks allocated during query parsing and execution (after query\_prealloc\_size is used up). | | [query\_cache\_strip\_comments](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#query_cache_strip_comments) | OFF | - | Whether to strip any comments from the query before searching to see if it exists in the [query cache](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/query-cache). | | [query\_prealloc\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#query_prealloc_size) | 24576 | 8192 | Size in bytes of the persistent buffer for query parsing and execution, allocated on connect and freed on disconnect. | | range\_optimizer\_max\_mem\_size | - | 1536000 | MySQL-only variable setting a limit on the range optimizer's memory usage. | | rbr\_exec\_mode | - | STRICT | MySQL-only variable for determining the handling of certain key errors. | | [read\_binlog\_speed\_limit](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 0 | - | Permits restricting the speed at which the slave reads the binlog from the master. | | relay\_log\_info\_repository | - | FILE | MySQL-only variable determining whether the slave's position in the relay logs is written to a file or table. | | [replicate\_annotate\_row\_events](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | ON | - | Tells the slave to reproduce annotate\_rows\_events received from the master in its own binary log. | | [replicate\_do\_db](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | empty string | - | See [Dynamic Replication Variables](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-filters). | | [replicate\_do\_table](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | empty string | - | See [Dynamic Replication Variables](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-filters). | | [replicate\_events\_marked\_for\_skip](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | replicate | - | See [Selectively skipping replication of binlog events](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/binary-log/selectively-skipping-replication-of-binlog-events). | | [replicate\_ignore\_db](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | empty string | - | See [Dynamic Replication Variables](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-filters). | | [replicate\_ignore\_table](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | empty string | - | See [Dynamic Replication Variables](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-filters). | | [replicate\_wild\_do\_table](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | empty string | - | See [Dynamic Replication Variables](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-filters). | | [replicate\_wild\_ignore\_table](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | empty string | - | See [Dynamic Replication Variables](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-filters). | | require\_secure\_transport | - | OFF | MySQL-only variable determining whether client to server connections need to be secure. | | [rowid\_merge\_buff\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#rowid_merge_buff_size) | 8388608 | - | See [Non-semi-join subquery optimizations](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/query-optimizations/subquery-optimizations/non-semi-join-subquery-optimizations). | | [rpl\_semi\_sync\_\*](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/semisynchronous-replication#system-variables) | - | - | [MariaDB 10.3](https://mariadb.com/docs/release-notes/community-server/old-releases/10.3/what-is-mariadb-103) includes [semisynchronous replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/semisynchronous-replication) without the need to install a plugin. | | rpl\_stop\_slave\_timeout | - | 31536000 | MySQL-only variable for controlling the time that STOP SLAVE waits before timing out. | | [secure\_timestamp](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#secure_timestamp) | NO | - | MariaDB-only option permitting the restricting of direct setting of a session timestamp.. | | [server\_id](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 1 | 0 | 0 is no longer valid in MariaDB. | | server\_id\_bits | - | server\_id | MySQL-only variable for use in MySQL Cluster. | | server\_uuid | - | UUID | MySQL-only variable containing the UUID. | | session\_track\_gtids | - | OFF | MySQL-only variables for tracking gtid changes. MariaDB and MySQL's gtid implementation is different. | | [session\_track\_transaction\_info](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#session_track_transaction_info) | OFF | \* | For tracking changes to the transaction attributes. | | sha256\_password\_proxy\_users | - | OFF | MySQL-only variable determining whether the sha256\_password plugin supports proxy users. | | show\_compatibility\_56 | - | OFF | MySQL variable for indicating status of certain compatibility traits between MySQL 5.6 and MySQL 5.7. | | show\_old\_temporals | - | OFF | MySQL-only variable for determining whether SHOW CREATE TABLE output should include comments for old format temporal columns. | | [skip\_parallel\_replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | OFF | - | See [parallel replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/parallel-replication). | | [skip\_replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | OFF | - | See [Selectively skipping replication of binlog events](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/server-monitoring-logs/binary-log/selectively-skipping-replication-of-binlog-events). | | slave\_allow\_batching | - | OFF | MySQL-only replication variable. | | slave\_checkpoint\_group | - | 512 | MySQL-only replication variable. | | slave\_checkpoint\_period | - | 300 | MySQL-only replication variable. | | [slave\_ddl\_exec\_mode](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | IDEMPOTENT | - | Modes for how replication of DDL events should be executed. | | [slave\_domain\_parallel\_threads](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 0 | - | For configuring [parallel replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/parallel-replication#configuration-variable-slave_domain_parallel_threads). | | [slave\_net\_timeout](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 3600 | 60 | MySQL 5.7 has reduced the timeout to 60s. | | [slave\_parallel\_max\_queued](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 131072 | - | For configuring [parallel replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/parallel-replication#configuration-variable-slave_domain_parallel_threads). | | [slave\_parallel\_mode](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | conservative | - | Controls what transactions are applied in parallel when using [parallel\_replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/parallel-replication). | | [slave\_parallel\_threads](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 0 | - | For configuring [parallel replication](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/parallel-replication#configuration-variable-slave_domain_parallel_threads). | | slave\_parallel\_type | - | DATABASE | MySQL-only replication variable. | | slave\_pending\_jobs\_size\_max | - | 16777216 | MySQL-only replication variable. | | slave\_preserve\_commit\_order | - | OFF | MySQL-only replication variable. | | slave\_rows\_search\_algorithms | - | TABLE\_SCAN, INDEX\_SCAN | MySQL-only replication variable. | | [slave\_run\_triggers\_for\_rbr](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | NO | | See [Running triggers on the slave for Row-based events](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/running-triggers-on-the-replica-for-row-based-events) for a description and use-case for this setting. | | [slave\_transaction\_retry\_errors](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 1213,1205 | - | When an error occurs during a transaction on the slave, replication usually halts. By default, transactions that caused a deadlock or elapsed lock wait timeout will be retried. One can add other errors to the list of errors that should be retried by adding a comma-separated list of error numbers to this variable. | | [slave\_transaction\_retry\_interval](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 0 | - | Interval in seconds for the slave SQL thread to retry a failed transaction due to a deadlock, elapsed lock wait timeout or an error listed in slave\_transaction\_retry\_errors. | | [sort\_buffer\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#sort_buffer_size) | 2097152 | 262144 | The default sort buffer allocated has been reduced in MySQL. | | [sql\_mode](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#sql_mode) | STRICT\_TRANS\_TABLES, ERROR\_FOR\_DIVISION\_BY\_ZERO, NO\_AUTO\_CREATE\_USER, NO\_ENGINE\_SUBSTITUTION | ONLY\_FULL\_GROUP\_BY, STRICT\_TRANS\_TABLES, NO\_ZERO\_IN\_DATE, NO\_ZERO\_DATE, ERROR\_FOR\_DIVISION\_BY\_ZERO, NO\_AUTO\_CREATE\_USER, NO\_ENGINE\_SUBSTITUTION | See [SQL Mode](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/sql_mode). | | [standard\_compliant\_cte](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#standard_compliant_cte) | ON | - | See [Common Table Expressions](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/sql-statements/data-manipulation/selecting-data/common-table-expressions). | | [storage\_engine](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#storage_engine) | InnoDB | - | Alias for [default\_storage\_engine](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#default_storage_engine), removed in MySQL. | | [strict\_password\_validation](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#strict_password_validation) | ON | - | In MariaDB, when password validation plugins are enabled, reject passwords that cannot be validated (passwords specified as a hash). | | super\_read\_only | - | OFF | MySQL variable for prohibiting client updates from users with the SUPER privilege. | | [sync\_binlog](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/standard-replication/replication-and-binary-log-system-variables) | 0 | 1 | MySQL 5.7 synchronizes all actions to the binary log before they are committed. | | [system\_versioning\_alter\_history](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/sql-structure/temporal-tables/system-versioned-tables#system_versioning_alter_history) | ERROR | - | MariaDB has [System-Versioned Tables](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/sql-structure/temporal-tables/system-versioned-tables) | | [system\_versioning\_asof](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/sql-structure/temporal-tables/system-versioned-tables#system_versioning_asof) | DEFAULT | - | MariaDB has [System-Versioned Tables](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/reference/sql-structure/temporal-tables/system-versioned-tables) | | [table\_definition\_cache](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#table_definition_cache) | 400 | -1 (autosized) | Number of table definitions that can be cached. | | [table\_open\_cache\_instances](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#table_open_cache_instances) | 8 | 16 | Maximum number of table cache instances. | | [tcp\_keepalive\_interval](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#tcp_keepalive_interval) | 0 | - | Interval, in seconds, between when successive keep-alive packets are sent if no acknowledgement is received. | | [tcp\_keepalive\_probes](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#tcp_keepalive_probes) | 0 | - | Number of unacknowledged probes to send before considering the connection dead and notifying the application layer. | | [tcp\_keepalive\_time](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#tcp_keepalive_time) | 0 | - | Timeout, in milliseconds, with no activity until the first TCP keep-alive packet is sent. | | [thread\_cache\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#thread_cache_size) | Autosized | -1 (autosized) | MariaDB uses an [improved thread pool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). | | [thread\_concurrency](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#thread_concurrency) | 10 | - | Removed in MySQL 5.7. | | [thread\_pool\_idle\_timeout](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-system-status-variables) | 60 | - | See [Using the Thread Pool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). | | [thread\_pool\_max\_threads](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-system-status-variables) | 65536 | - | See [Using the Thread Pool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). | | [thread\_pool\_min\_threads](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-system-status-variables) | 1 | - | Windows-only. See [Using the Thread Pool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). | | [thread\_pool\_oversubscribe](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-system-status-variables) | 3 | - | See [Using the Thread Pool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). | | [thread\_pool\_prio\_kickup](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-system-status-variables) | auto | - | See [Using the Thread Pool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). | | [thread\_pool\_priority](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-system-status-variables) | auto | - | See [Using the Thread Pool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). | | [thread\_pool\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-system-status-variables) | Number of processors | 16\* | See [Using the Thread Pool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). \*Only available in MySQL with a commercial plugin. | | [thread\_pool\_stall\_limit](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-system-status-variables) | 500 | 6\* | See [Using the Thread Pool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). \*Only available in MySQL with a commercial plugin. | | [thread\_stack](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#thread_stack) | 299008 | 196608 or 262144 | See [Using the Thread Pool](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/buffers-caches-and-threads/thread-pool/thread-pool-in-mariadb). | | [timed\_mutexes](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#timed_mutexes) | OFF | - | Removed in MySQL 5.7. | | tls\_version | - | Varies | MySQL-only variable showing the permitted tls protocols. | | [tmp\_disk\_table\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#tmp_disk_table_size) | 18446744073709551615 | - | Max size for data for an internal temporary on-disk MyISAM or Aria table. | | [tmp\_memory\_table\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#tmp_memory_table_size) | 16777216 | - | Alias for [tmp\_table\_size](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#tmp_table_size). | | transaction\_allow\_batching | - | OFF | MySQL-only variable for enabling batching of statements within the same transaction in MySQL Cluster. | | transaction\_write\_set\_extraction | - | OFF | Unused MySQL-only variable. | | [use\_stat\_tables](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#use_stat_tables) | NEVER | - | Controls the use of [engine-independent table statistics](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/query-optimizations/statistics-for-optimizing-queries/engine-independent-table-statistics). | | [userstat](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#userstat) | OFF | - | Whether to activate MariaDB's [User Statistics](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/ha-and-performance/optimization-and-tuning/query-optimizations/statistics-for-optimizing-queries/user-statistics) implementation, not available in MySQL. | | [version\_malloc\_library](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#version_malloc_library) | \* | - | Version of the used malloc library. | | [version\_source\_revision](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/server-management/variables-and-modes/server-system-variables#version_source_revision) | Varies | - | Permits seeing exactly which version of the source was used for a build. | | [version\_ssl\_library](https://app.gitbook.com/s/SsmexDFPv2xG2OTyO5yV/security/encryption/data-in-transit-encryption/ssltls-system-variables) | \* | - | Version of the used TLS library. | | [wsrep\_\*](https://app.gitbook.com/s/3VYeeVGUV4AMqrA3zwy7/reference/galera-cluster-system-variables) | \* | - | [Galera cluster](https://github.com/mariadb-corporation/docs-release-notes/blob/test/kb/en/mariadb-galera-cluster/README.md) is only available in MariaDB. | | Variable | [MariaDB 10.3](https://mariadb.com/docs/release-notes/community-server/old-releases/10.3/what-is-mariadb-103) | MySQL 5.7 | Notes | ## See Also * [System Variable Differences Between MariaDB 10.3 and MySQL 8.0](https://mariadb.com/docs/release-notes/community-server/about/compatibility-and-differences/system-variable-differences-between-mariadb-and-mysql/system-variable-differences-between-mariadb-and-mysql-unmaintained-series/system-variable-differences-between-mariadb-10-3-and-mysql-8-0) * [System Variable Differences Between MariaDB 10.2 and MySQL 5.7](https://mariadb.com/docs/release-notes/community-server/about/compatibility-and-differences/system-variable-differences-between-mariadb-and-mysql/system-variable-differences-between-mariadb-and-mysql-unmaintained-series/system-variable-differences-between-mariadb-10-2-and-mysql-5-7) * [System Variable Differences Between MariaDB 10.1 and MySQL 5.7](https://mariadb.com/docs/release-notes/community-server/about/compatibility-and-differences/system-variable-differences-between-mariadb-and-mysql/system-variable-differences-between-mariadb-and-mysql-unmaintained-series/system-variable-differences-between-mariadb-10-1-and-mysql-5-7) {% @marketo/form formid="4316" formId="4316" %}