WEBVTT
00:00:00.850 --> 00:00:06.340
In this lesson, we’ll learn how to use integration to find the volume of a solid with a variable cross section.
00:00:07.220 --> 00:00:13.090
We’ll use what’s called a slicing method and begin by reminding ourselves of some of the ideas we’ll need to use.
00:00:13.910 --> 00:00:17.160
We’ll then discuss how and in what circumstances the method is used.
00:00:17.390 --> 00:00:18.980
And then, we’ll look at some examples.
00:00:20.360 --> 00:00:24.770
We know that area is a measure of the space covered by a two-dimensional shape or region.
00:00:25.600 --> 00:00:30.200
For example, for a rectangle with side lengths 𝑎 and 𝑏, the area is 𝑎 times 𝑏.
00:00:31.110 --> 00:00:34.470
For a circle with radius 𝑟, the area is 𝜋𝑟 squared.
00:00:35.210 --> 00:00:41.970
And for a trapezoid with side lengths 𝑎 and 𝑏 and height ℎ, the area is ℎ over two times 𝑎 plus 𝑏.
00:00:42.940 --> 00:00:45.570
And remember that area is measured in units squared.
00:00:46.710 --> 00:00:50.970
Volume is a measure we use for the amount of three-dimensional space taken up by a solid.
00:00:51.530 --> 00:00:57.370
For example, for a cuboid with sides 𝑎, 𝑏, and ℎ, the volume is 𝑎 times 𝑏 times ℎ.
00:00:58.100 --> 00:01:02.360
For a sphere with radius 𝑟, the volume is four over three 𝜋𝑟 cubed.
00:01:03.180 --> 00:01:08.560
And for a circular cylinder with radius 𝑟 and height ℎ, the volume is 𝜋𝑟 squared times ℎ.
00:01:09.190 --> 00:01:11.940
And remember that volume is measured in units cubed.
00:01:12.840 --> 00:01:27.890
We know also that if we have two curves 𝑓 of 𝑥 and 𝑔 of 𝑥, and we want to find the area between the two curves for values of 𝑥 between 𝑎 and 𝑏, then the area is the integral between 𝑎 and 𝑏 of 𝑓 of 𝑥 minus 𝑔 of 𝑥 with respect to 𝑥.
00:01:28.540 --> 00:01:33.730
We’re going to extend this idea and use definite integrals to find volumes of three-dimensional solids.
00:01:34.650 --> 00:01:42.430
We do this by slicing the solid into an infinite number of cross sections, using integration to sum the areas of the cross sections or slices.
00:01:42.940 --> 00:01:50.350
So, for the volume of a three-dimensional shape, the volume is equal to a definite integral of the area of the cross sections with respect to 𝑥.
00:01:50.990 --> 00:01:55.640
Before we start integrating, however, let’s have a closer look at how this might work geometrically.
00:01:57.210 --> 00:02:02.430
Here, we have a cylinder with semicircular ends that are parallel to each other and perpendicular to the sides.
00:02:02.990 --> 00:02:04.460
The sides are of length ℎ.
00:02:05.260 --> 00:02:10.740
If we take a cross section from anywhere along ℎ, the area of each cross section is the same.
00:02:11.750 --> 00:02:15.450
The volume is equal to the cross-sectional area times the length ℎ.
00:02:16.300 --> 00:02:20.430
This works fine if the area of the cross section is constant, so we have a formula for the area.
00:02:21.230 --> 00:02:28.220
But if the area of the cross sections of our solid are not constant, we can use the slicing method and a definite integral to calculate the volume.
00:02:29.110 --> 00:02:30.380
Let’s see how this works.
00:02:31.330 --> 00:02:36.670
Suppose we have a circle defined by 𝑥 squared plus 𝑦 squared is equal to 𝑟 squared with the centre at the origin.
00:02:37.440 --> 00:02:39.400
The circle is to be the base of our solid.
00:02:40.940 --> 00:02:46.100
Now, suppose the cross sections are equilateral triangles with one edge accord across the circle.
00:02:46.440 --> 00:02:49.010
The cross sections are perpendicular to the 𝑥-axis.
00:02:49.620 --> 00:02:59.030
To find the volume of the solid generated by these triangles, where the base is the circle, we let 𝐴 of 𝑥 be the area of the triangle crossing the 𝑥-axis at the point 𝑥.
00:02:59.310 --> 00:03:02.640
So, that is, the value of 𝑥 changes, so will the area of the triangle.
00:03:03.230 --> 00:03:19.910
If we split our solid into cross-sectional slabs, where each slap has a width of Δ𝑥, if we label our slab 𝑆 𝑖, then the volume of this slab is approximately equal to the area of the cross section at 𝑥 is equal to 𝑥 𝑖 star times Δ𝑥.
00:03:20.360 --> 00:03:24.480
Where 𝑥 𝑖 star is a sample point in between 𝑥 𝑖 minus one and 𝑥 𝑖.
00:03:25.470 --> 00:03:31.620
An estimate for the total volume of a solid is, therefore, the sum of the volumes of these 𝑛 cross-sectional slabs.
00:03:31.980 --> 00:03:33.410
This is just an estimate, of course.
00:03:33.410 --> 00:03:39.590
And as the number of cross-sectional slabs 𝑛 gets larger, and Δ𝑥 gets smaller, the slices get thinner and thinner.
00:03:40.310 --> 00:03:45.640
We define the volume of the whole solid, therefore, as the limit of this sum as 𝑛 tends to infinity.
00:03:46.080 --> 00:03:50.520
And we recognise this as the limit of the Riemann sum, which is a definite integral.
00:03:51.380 --> 00:04:05.930
We can now define the volume for a solid 𝑆 between 𝑥 is equal to 𝑎 and 𝑥 is equal 𝑏 with cross-sectional area 𝐴 of 𝑥 perpendicular to the 𝑥-axis where 𝐴 is continuous as the integral between 𝑎 and 𝑏 of 𝐴 of 𝑥 with respect to 𝑥.
00:04:06.570 --> 00:04:12.250
It’s important to remember that this is the volume of a solid where the cross-sectional area is perpendicular to the 𝑥-axis.
00:04:12.860 --> 00:04:23.430
If the cross sections were perpendicular to the 𝑦-axis, our limits would change to 𝑦-values, and our areas would be our functions of 𝑦 so that the integral itself would be with respect to 𝑦.
00:04:24.400 --> 00:04:27.210
Before beginning an example, let’s make a note of our strategy.
00:04:28.820 --> 00:04:33.890
When finding volumes of solids by slicing, the first thing to do is to determine the base of the solid.
00:04:34.360 --> 00:04:39.540
We then determine the shape of the cross sections and try and sketch a picture of what we have.
00:04:40.340 --> 00:04:43.120
We then need to find a formula for the area of the cross section.
00:04:43.750 --> 00:04:48.790
And remember, if the cross section is perpendicular to the 𝑥-axis, then the area will be a function of 𝑥.
00:04:49.160 --> 00:04:53.570
If the cross section is perpendicular to the 𝑦-axis, then the area will be a function of 𝑦.
00:04:54.030 --> 00:04:59.000
And similarly, if the cross section is perpendicular to the 𝑧-axis, then the area will be a function of 𝑧.
00:04:59.960 --> 00:05:04.970
Then, for the volume of the solid, we integrate the area of the cross section over an appropriate interval.
00:05:05.830 --> 00:05:08.900
The interval of the integration will be defined by the base of the solid.
00:05:09.780 --> 00:05:11.180
Now, let’s look at an example.
00:05:12.480 --> 00:05:25.020
Use the slicing method to find the volume of the solid whose base is the region inside the circle 𝑥 squared plus 𝑦 squared is equal to two centred at the origin, if the cross sections are equilateral triangles perpendicular to the 𝑥-axis.
00:05:25.850 --> 00:05:37.860
We’re asked to find the volume of a solid whose base is the region inside the circle 𝑥 squared plus 𝑦 squared is equal to two centred at the origin where the cross sections are equilateral triangles perpendicular to the 𝑥-axis.
00:05:39.090 --> 00:05:41.470
Let’s first sketch our base and our cross sections.
00:05:42.190 --> 00:05:45.160
Our base is the circle 𝑥 squared plus 𝑦 squared is equal to two.
00:05:45.600 --> 00:05:51.570
This means the radius 𝑟 squared is equal to two, which means that the radius 𝑟 is equal to plus or minus the square root of two.
00:05:52.410 --> 00:05:56.140
Our cross sections are equilateral triangles perpendicular to the 𝑥-axis.
00:05:56.590 --> 00:05:59.830
The peak of our solid will be traced out by the apexes of these triangles.
00:06:00.560 --> 00:06:03.150
Remember, we’ll want to calculate the volume of the solid.
00:06:03.500 --> 00:06:09.890
And that’s equal to the definite integral of the areas of the cross sections between limits defined by the boundaries of the base.
00:06:10.690 --> 00:06:13.810
Our first task is then to calculate the area of the triangles.
00:06:14.540 --> 00:06:17.450
Remember that the area of a triangle is half the base times the height.
00:06:18.190 --> 00:06:21.960
In our case, the base is two 𝑦 since it’s split in half by the 𝑥-axis.
00:06:22.550 --> 00:06:26.300
And since this is an equilateral triangle, each side has length two 𝑦.
00:06:27.110 --> 00:06:33.270
Now, remember that because the cross sections are perpendicular to the 𝑥-axis, we need to find the area as a function of 𝑥.
00:06:33.800 --> 00:06:37.040
In order to do that, we’ll first find the height ℎ in terms of 𝑦.
00:06:37.480 --> 00:06:41.510
And using the equation for our base, we can find the area as a function of 𝑥.
00:06:42.150 --> 00:06:44.940
To find the height ℎ, let’s use the Pythagorean theorem.
00:06:45.540 --> 00:06:51.680
This says, for a right angle triangle with sides 𝑎, 𝑏, 𝑐, 𝑎 squared plus 𝑏 squared is equal to 𝑐 squared.
00:06:52.500 --> 00:06:56.770
In our case, this means that ℎ squared plus 𝑦 squared is equal to two 𝑦 all squared.
00:06:57.630 --> 00:06:59.120
That’s equal to four 𝑦 squared.
00:06:59.490 --> 00:07:08.230
So, ℎ squared is four 𝑦 squared minus 𝑦 squared, which is three 𝑦 squared, which gives us that ℎ, since it’s a length, is the positive square root of three times 𝑦.
00:07:09.740 --> 00:07:18.120
Now, using our formula for the area of a triangle, we have the area of our cross-sectional triangle is equal to half times two 𝑦 times the square root of three times 𝑦.
00:07:18.910 --> 00:07:23.010
Cancelling our twos, that gives us the area is equal to the square root of three times 𝑦 squared.
00:07:23.630 --> 00:07:27.510
Now, from the equation of our circle, we have 𝑥 squared plus 𝑦 squared is equal to two.
00:07:27.730 --> 00:07:30.290
This means that 𝑦 squared is two minus 𝑥 squared.
00:07:30.900 --> 00:07:38.790
So, if we substitute this into our area, we get areas of function of 𝑥 so that our area is the square root of three times two minus 𝑥 squared.
00:07:39.540 --> 00:07:45.220
Remember that the volume is the integral of the area where the limits are defined by the boundaries of our base.
00:07:45.800 --> 00:07:48.610
In our case, then, the limits are negative root two to root two.
00:07:49.300 --> 00:07:55.570
So, our volume is the integral between negative root two and root two of the square root of three times two minus 𝑥 squared with respect to 𝑥.
00:07:56.320 --> 00:07:58.780
As root three is a constant, we can take this outside.
00:07:59.520 --> 00:08:05.140
So, our integral becomes root three times the integral between negative root two and root two of two minus 𝑥 squared with respect to 𝑥.
00:08:05.840 --> 00:08:08.940
We can also use the symmetry of the circle to make this a little bit easier.
00:08:09.660 --> 00:08:14.370
By the symmetry of the circle, we can change the lower limit to zero and multiply the integral by two.
00:08:15.030 --> 00:08:22.970
So, we now have the volume equal to two times the square root of three times the integral between zero and the square root of two times two minus 𝑥 squared with respect to 𝑥.
00:08:23.790 --> 00:08:28.390
The integral of two with respect to 𝑥 is two 𝑥 evaluated between zero and square root of two.
00:08:28.960 --> 00:08:34.710
And the integral of 𝑥 squared with respect to 𝑥 is one over three 𝑥 cubed evaluated between the limits zero and root two.
00:08:35.520 --> 00:08:42.260
Our volume is, therefore, two times the square root of three times two 𝑥 minus 𝑥 cubed over three evaluated between zero and root two.
00:08:43.030 --> 00:08:49.610
That gives us two times the square root of three times two root two minus root two cubed over three minus zero minus zero.
00:08:50.390 --> 00:08:53.680
Evaluating this, we get eight times the square root of six over three.
00:08:54.570 --> 00:09:07.570
The volume of the solid whose base is the region inside the circle 𝑥 squared plus 𝑦 squared is two centred at the origin where the cross sections are equilateral triangles perpendicular to the 𝑥-axis is eight times root six over three units cubed.
00:09:09.900 --> 00:09:14.770
We found this volume by finding the areas of the cross-sectional triangles in terms of 𝑥.
00:09:15.350 --> 00:09:19.030
We then integrated this area over an interval defined by the base.
00:09:19.770 --> 00:09:21.620
Let’s try this on a different example.
00:09:22.760 --> 00:09:36.480
Use the slicing method to find the volume of the solid whose base is the region under the parabola 𝑦 is equal to four minus 𝑥 squared in the first quadrant and whose cross-sectional slices are squares perpendicular to the 𝑥-axis with one edge in the 𝑥𝑦-plane.
00:09:37.360 --> 00:09:42.640
We want to find the volume of a solid whose base is the region under the parabola 𝑦 is equal to four minus 𝑥 squared.
00:09:43.310 --> 00:09:44.830
We’re looking in the first quadrant.
00:09:45.320 --> 00:09:52.490
And where the solid has cross-sectional slices which are squares perpendicular to the 𝑥-axis with one edge in the 𝑥𝑦-plane.
00:09:53.860 --> 00:09:57.550
The first thing we can do is draw our parabola 𝑦 is equal to four minus 𝑥 squared.
00:09:58.170 --> 00:10:01.450
And 𝑦 is equal to zero, our equation, gives us 𝑥 squared is equal to four.
00:10:02.080 --> 00:10:06.220
So, our parabola crosses the 𝑥-axis at 𝑥 is equal to negative two and two.
00:10:06.920 --> 00:10:09.180
When 𝑥 is equal to zero, 𝑦 is equal to four.
00:10:09.610 --> 00:10:12.740
So, our parabola intersects the 𝑦-axis at 𝑦 is equal to four.
00:10:13.530 --> 00:10:17.350
The base of our solid is the region under the parabola in the first quadrant.
00:10:18.270 --> 00:10:23.610
The cross sections of our solid are squares which are perpendicular to the 𝑥-axis with one edge in the 𝑥𝑦-plane.
00:10:24.180 --> 00:10:33.370
To find our volume, we integrate the areas of the cross section where the limits of integration are defined by our parabola, the lower limit is zero, and the upper limit is two.
00:10:34.240 --> 00:10:37.870
We know that the area of a square with side length 𝑎 is equal to 𝑎 squared.
00:10:38.670 --> 00:10:41.390
In our case, the length of the sides of each square is 𝑦.
00:10:42.210 --> 00:10:45.160
And the value of 𝑦 depends on where the square meets the 𝑥-axis.
00:10:45.930 --> 00:10:48.200
The area of each square is, therefore, 𝑦 squared.
00:10:48.910 --> 00:10:55.330
And since 𝑦 is equal to four minus 𝑥 squared, we have the area of the cross section equal to four minus 𝑥 squared all squared.
00:10:55.980 --> 00:10:58.760
So, we have the area of the cross section as a function of 𝑥.
00:10:59.330 --> 00:11:04.180
Our volume is, then, the integral between zero and two of four minus 𝑥 squared all squared with respect to 𝑥.
00:11:04.830 --> 00:11:07.720
To make the integral a little easier, we can expand the bracket.
00:11:08.290 --> 00:11:14.520
This gives us the integral between zero and two of 16 minus eight 𝑥 squared plus 𝑥 to the power of four with respect to 𝑥.
00:11:15.050 --> 00:11:19.960
The integral of 16 with respect to 𝑥 between zero and two is 16𝑥 between zero and two.
00:11:20.460 --> 00:11:27.250
The integral of negative eight 𝑥 squared with respect to 𝑥 is negative eight times 𝑥 to the power of three divided by three between zero and two.
00:11:27.850 --> 00:11:33.050
And the integral of 𝑥 to the power of four is 𝑥 to the five divided by five evaluated between zero and two.
00:11:33.640 --> 00:11:39.700
Evaluating this, we have 16 times two minus eight times eight over three plus two to the five over five minus zero.
00:11:40.630 --> 00:11:44.090
Evaluating this gives us 256 divided by 15.
00:11:44.980 --> 00:11:58.980
The volume of the solid whose base is the region under the parabola 𝑦 is equal to four minus 𝑥 squared in the first quadrant where the cross-sectional slices are squares perpendicular to the 𝑥-axis with one edge in the 𝑥𝑦-plane is equal to 256 divided by 15 units cubed.
00:12:01.490 --> 00:12:06.690
In this example, our slices were squares perpendicular to the 𝑥-axis with one edge in the 𝑥𝑦-plane.
00:12:07.380 --> 00:12:12.140
Let’s look at one more example where, in this case, the cross sections are perpendicular to the 𝑦-axis.
00:12:12.790 --> 00:12:23.070
Use the slicing method to find the volume of the solid whose base is the region under the parabola 𝑦 is equal to nine minus 𝑥 squared and above the 𝑥-axis and where slices perpendicular to the 𝑦-axis are squares.
00:12:23.990 --> 00:12:30.030
We’re asked to find the volume of a solid whose base is defined by the parabola 𝑦 is equal to nine minus 𝑥 squared and above the 𝑥-axis.
00:12:30.380 --> 00:12:34.050
The slices of the solid are perpendicular to the 𝑦-axis and are squares.
00:12:35.530 --> 00:12:37.630
Let’s first draw the base region of our solid.
00:12:38.340 --> 00:12:47.470
Our parabola is 𝑦 is equal to nine minus 𝑥 squared so that when 𝑦 is equal to zero, 𝑥 squared is equal to nine so that 𝑥 is equal to positive or negative three.
00:12:48.040 --> 00:12:50.340
When 𝑥 is equal to zero, 𝑦 is equal to nine.
00:12:51.090 --> 00:12:53.340
And this is where our function crosses the 𝑦-axis.
00:12:54.000 --> 00:12:57.640
The region under this curve and above the 𝑥-axis forms the base of our solid.
00:12:58.680 --> 00:13:00.100
Our cross sections are squares.
00:13:00.100 --> 00:13:02.080
And these are perpendicular to the 𝑦-axis.
00:13:02.680 --> 00:13:05.140
The length of the sides of each square is two 𝑥.
00:13:05.910 --> 00:13:09.110
And the value of 𝑥 depends on where the square crosses the 𝑦-axis.
00:13:09.810 --> 00:13:15.410
The area of a cross-sectional square is, therefore, two 𝑥 times two 𝑥, which is four 𝑥 squared.
00:13:16.150 --> 00:13:25.620
The volume of our solid, however, is an integral along the 𝑦-axis between 𝑦 is zero and nine of the area of the cross-sectional squares as a function of 𝑦.
00:13:26.230 --> 00:13:28.880
So, we need to convert our area into a function of 𝑦.
00:13:29.580 --> 00:13:35.040
We know that 𝑦 is equal to nine minus 𝑥 squared, which gives us 𝑥 squared equal to nine minus 𝑦.
00:13:35.640 --> 00:13:42.030
Our area as a function of 𝑥 is four 𝑥 squared so that four 𝑥 squared is equal to nine minus 𝑦 times four.
00:13:42.730 --> 00:13:49.840
In other words, four 𝑥 squared is equal to four times nine minus 𝑦 so that our area, in fact, is four times nine minus 𝑦.
00:13:51.590 --> 00:13:57.570
And we can now work out our volume, which is the integral between zero and nine of four times nine minus 𝑦 with respect to 𝑦.
00:13:58.390 --> 00:14:01.340
We can take the four outside since this is a constant multiple.
00:14:02.250 --> 00:14:05.930
We know that the integral of nine with respect to 𝑦 is nine times 𝑦.
00:14:06.420 --> 00:14:11.280
And we know that the integral of negative 𝑦 with respect to 𝑦 is negative 𝑦 squared over two.
00:14:11.910 --> 00:14:17.470
So, then, our volume is four times nine 𝑦 minus 𝑦 squared over two evaluated between zero and nine.
00:14:18.640 --> 00:14:22.460
This is four times nine times nine minus nine squared over two minus zero.
00:14:22.990 --> 00:14:28.450
That gives us four times 81 minus 40.5, which is 162.
00:14:29.430 --> 00:14:40.970
The volume of the solid whose base is the region under the parabola 𝑦 is nine minus 𝑥 squared and above the 𝑥-axis where slices are perpendicular to the 𝑦-axis and are squares is, therefore, 162 units cubed.
00:14:41.940 --> 00:14:46.530
Now, let’s remind ourselves of the key points in finding the volume of a solid by the slicing method.
00:14:47.370 --> 00:14:50.230
The first thing we need to do is determine the base of our solid.
00:14:51.080 --> 00:14:56.860
We then determine the shape of the cross section of the solid and then sketch the cross section and the base.
00:14:57.630 --> 00:15:00.340
We then find a formula for the area of our cross section.
00:15:01.170 --> 00:15:05.330
If the cross section is perpendicular to the 𝑥-axis, this will be a function of 𝑥.
00:15:05.730 --> 00:15:09.980
If the cross section is perpendicular to the 𝑦-axis, the area will be a function of 𝑦.
00:15:10.490 --> 00:15:15.130
And if the cross section is perpendicular to the 𝑧-axis, then the area will be a function of 𝑧.
00:15:15.950 --> 00:15:21.480
To find our volume we then integrate the area of the cross section over an interval defined by the base region.
00:15:22.160 --> 00:15:30.950
If our cross sections are perpendicular to the 𝑥-axis, then our volume is equal to the integral between 𝑥 is 𝑎 and 𝑥 is 𝑏 of the area, which is a function of 𝑥 with respect to 𝑥.
00:15:31.460 --> 00:15:39.300
If the cross sections are perpendicular to the 𝑦-axis, then our limits change to 𝑦-values, our area is a function of 𝑦, and we integrate with respect to 𝑦.
00:15:39.930 --> 00:15:48.170
If our cross sections are perpendicular to the 𝑧-axis, then our limits become 𝑧 values, our function area is a function of 𝑧, and we integrate with respect to 𝑧.
00:15:49.300 --> 00:15:57.060
So, the key in finding the volume is to determine the base of the solid, the shape of the cross section, and where that cross section sits with respect to the axes.