Group Commit for the Binary Log

You are viewing an old version of this article. View the current version here.

Overview

The server supports group commit. This is an important optimization that helps MariaDB reduce the number of expensive disk operations that are performed.

Durability

In ACID terminology, the "D" stands for durability. In order to ensure durability with group commit, innodb_flush_log_at_trx_commit=1 and/or sync_binlog=1 should be set. These settings are needed to ensure that if the server crashes, then any transaction that was committed prior to the time of crash will still be present in the database after crash recovery.

Durable InnoDB Data and Binary Logs

Setting both innodb_flush_log_at_trx_commit=1 and sync_binlog=1 provides the most durability and the best guarantee of replication consistency after a crash.

Non-Durable InnoDB Data

If sync_binlog=1 is set, but innodb_flush_log_at_trx_commit is not set to 1 or 3, then it is possible after a crash to end up in a state where a transaction present in a server's binary log is missing from the server's InnoDB redo log. If the server is a replication master, then that means that the server can become inconsistent with its slaves, since the slaves may have replicated transactions from the master's binary log that are no longer present in the master's local InnoDB data.

Non-Durable Binary Logs

If innodb_flush_log_at_trx_commit is set to 1 or 3, but sync_binlog=1 is not set, then it is possible after a crash to end up in a state where a transaction present in a server's InnoDB redo log is missing from the server's binary log. If the server is a replication master, then that also means that the server can become inconsistent with its slaves, since the server's slaves would not be able to replicate the missing transactions from the server's binary log.

Non-Durable InnoDB Data and Binary Logs

Setting innodb_flush_log_at_trx_commit=1 when sync_binlog=1 is not set can also cause the transaction to be missing from the server's InnoDB redo log due to some optimizations added in those versions. In that case, it is recommended to always set sync_binlog=1. If you can't do that, then it is recommended to set innodb_flush_log_at_trx_commit to 3, rather than 1. See Non-durable Binary Log Settings for more information.

Amortizing Disk Flush Costs

After every transaction COMMIT, the server normally has to flush any changes the transaction made to the InnoDB redo log and the binary log to disk (i.e. by calling system calls such as fsync() or fdatasync() or similar). This helps ensure that the data changes made by the transaction are stored durably on the disk. Disk flushing is a time-consuming operation, and can easily impose limits on throughput in terms of the number of transactions-per-second (TPS) which can be committed.

The idea with group commit is to amortize the costs of each flush to disk over multiple commits from multiple parallel transactions. For example, if there are 10 transactions trying to commit in parallel, then we can force all of them to be flushed disk at once with a single system call, rather than do one system call for each commit. This can greatly reduce the need for flush operations, and can consequently greatly improve the throughput of transactions-per-second (TPS).

However, to see the positive effects of group commit, the workload must have sufficient parallelism. A good rule of thumb is that at least three parallel transactions are needed for group commit to be effective. For example, while the first transaction is waiting for its flush operation to complete, the other two transactions will queue up waiting for their turn to flush their changes to disk. When the first transaction is done, a single system call can be used to flush the two queued-up transactions, saving in this case one of the three system calls.

In addition to sufficient parallelism, it is also necessary to have enough transactions per second wanting to commit that the flush operations are a bottleneck. If no such bottleneck exists (i.e. transactions never or rarely need to wait for the flush of another to complete), then group commit will provide little to no improvement.

Changing Group Commit Frequency

The frequency of group commits can be changed by configuring the binlog_commit_wait_usec and binlog_commit_wait_count system variables.

Measuring Group Commit Ratio

Two status variables are available for checking how effective group commit is at reducing flush overhead. These are the Binlog_commits and Binlog_group_commits status variables. We can obtain those values with the following query:

SHOW GLOBAL STATUS WHERE Variable_name IN('Binlog_commits', 'Binlog_group_commits');

Binlog_commits is the total number of transactions committed to the binary log.

Binlog_group_commits is the total number of groups committed to the binary log. As explained in the previous sections of this page, a group commit is when a group of transactions is flushed to the binary log together by sharing a single flush system call. When sync_binlog=1 is set, then this is also the total number of flush system calls executed in the process of flushing commits to the binary log.

Thus the extent to which group commit is effective at reducing the number of flush system calls on the binary log can be determined by the ratio between these two status variables. Binlog_commits will always be as equal to or greater than Binlog_group_commits. The greater the difference is between these status variables, the more effective group commit was at reducing flush overhead.

To calculate the group commit ratio, we actually need the values of these status variables from two snapshots. Then we can calculate the ratio with the following formula:

transactions/group commit = (Binlog_commits (snapshot2) - Binlog_commits (snapshot1))/(Binlog_group_commits (snapshot2) - Binlog_group_commits (snapshot1))

For example, if we had the following first snapshot:

SHOW GLOBAL STATUS WHERE Variable_name IN('Binlog_commits', 'Binlog_group_commits');
+----------------------+-------+
| Variable_name        | Value |
+----------------------+-------+
| Binlog_commits       | 120   |
| Binlog_group_commits | 120   |
+----------------------+-------+
2 rows in set (0.00 sec)

And the following second snapshot:

SHOW GLOBAL STATUS WHERE Variable_name IN('Binlog_commits', 'Binlog_group_commits');
+----------------------+-------+
| Variable_name        | Value |
+----------------------+-------+
| Binlog_commits       | 220   |
| Binlog_group_commits | 145   |
+----------------------+-------+
2 rows in set (0.00 sec)

Then we would have:

transactions/group commit = (220 - 120) / (145 - 120) = 100 / 25 = 4 transactions/group commit

If your group commit ratio is too close to 1, then it may help to change your group commit frequency.

Use of Group Commit with Parallel Replication

Group commit is also used to enable conservative mode of in-order parallel replication.

Effects of Group Commit on InnoDB Performance

When both innodb_flush_log_at_trx_commit=1 (the default) is set and the binary log is enabled, there is now one less sync to disk inside InnoDB during commit (2 syncs shared between a group of transactions instead of 3). See Binary Log Group Commit and InnoDB Flushing Performance for more information.

Status Variables

Binlog_commits is the total number of transactions committed to the binary log.

Binlog_group_commits is the total number of groups committed to the binary log.

Binlog_group_commit_trigger_count is the total number of group commits triggered because of the number of binary log commits in the group reached the limit set by the system variable binlog_commit_wait_count.

Binlog_group_commit_trigger_lock_wait is the total number of group commits triggered because a binary log commit was being delayed because of a lock wait where the lock was held by a prior binary log commit. When this happens the later binary log commit is placed in the next group commit.

Binlog_group_commit_trigger_timeout is the total number of group commits triggered because of the time since the first binary log commit reached the limit set by the system variable binlog_commit_wait_usec.

To query these variables, use a statement such as:

SHOW GLOBAL STATUS LIKE 'Binlog_%commit%';

See Also

Comments

Comments loading...
Content reproduced on this site is the property of its respective owners, and this content is not reviewed in advance by MariaDB. The views, information and opinions expressed by this content do not necessarily represent those of MariaDB or any other party.