The Ultimate Guide to High Availability with MariaDB

MariaDB ColumnStore Module Configurations

You are viewing an old version of this article. View the current version here.

Configuring Modules

A Module(UM or PM) can be added ore removed from MariaDB ColumnStore.

Before configuring modules

Before configuring modules, you should shut down the database and backup up the System and the database. <<See “Performing Backup and Recovery” for instructions.>> Ensure you have the root password for all modules that will be added, removed or reconfigured. NOTE: After adding modules, update the NMS system so that new modules are monitored as part of the system. While removing modules, the NMS may issue an alert that servers are no longer functioning on the network.

Module IDs

Modules in the System are identified by the "um" or "pm" followed by a unique number - such as um1, pm1, pm2, pm3 etc.

The system assigns the module id as they are added

Adding DBRoots

To add dbroots (storage files) into your system, it requires a 2 operations: creating the physical dbroots and assigning them to a Performance Module.

Creating the physical dbroot

The OAM addDbRoot command is used to create the physical storage (dbroot):

  1. mcsadmin addDbroot numRoots where numRoots is the total number of new dbroots to be added. The command will return the dbroot id’s created. 
Example to add 2 additional dbroots to an already existing 2 dbroot system:
# mcsadmin adddbroot 2
adddbroot Mon Aug 26 15:00:38 2013
New DBRoot IDs added = 3, 4

After the addDbroot command, dbroots 3 and 4 have been created. You can see that they have been created by using the getSystemConfig command. Along with other information, towards the bottom of the output you will see information that reflects the additional, unassigned dbroots.

# mcsadmin  getsystemconfig
:
System Assigned DBRoot Count = 2
DBRoot IDs assigned to 'pm1' = 1
DBRoot IDs assigned to 'pm2' = 2
DBRoot IDs unassigned = 3, 4
:

Assign DBRoots to Performance Module

After adding a DBRoot, it must be assigned to a Performance Module before it can be used. Use mcsadmin assignDbrootPmConfig command to do so. Note: The system must be in a STOPPED state when assigning a DBRoot. Use the stopSystem command. Do not attempt when the system is running or when the system has been ShutDown.

Syntax

# mcsadmin assignDbrootPmConfig dbrootid perfmod
where
dbrootid is the unassigned dbroot(s) to be assigned. You can assign multiple dbroots to a single Performance module with a comma separated list.
perfmoed is the Performance Module being assigned the dbroots.

Example #1 of assigning the 2 new dbroots to 2 separate PMs:

# mcsadmin  assignPmDBRootConfig 3 pm1
assigndbrootpmconfig Tue Aug 19 18:03:15 2015
DBRoot IDs assigned to 'pm1' = 1
Changes being applied
DBRoot IDs assigned to 'pm1' = 1, 3
Successfully Assigned DBRoots
REMINDER: Update the /etc/fstab on pm1 to include these dbroot mounts

# mcsadmin  assignPmDBRootConfig 4 pm2
assigndbrootpmconfig Tue Aug 19 18:03:18 2015
DBRoot IDs assigned to 'pm2' = 2
Changes being applied
DBRoot IDs assigned to 'pm2' = 2, 4
Successfully Assigned DBRoots
REMINDER: Update the /etc/fstab on pm2 to include these dbroot mounts

Example #2 of assigning the 2 new dbroots to 1 PM:

# mcsadmin  assignPmDBRootConfig 3,4 pm2
assigndbrootpmconfig Tue Aug 19 18:17:46 2015
DBRoot IDs assigned to 'pm2' = 2
Changes being applied
DBRoot IDs assigned to 'pm2' = 2, 3, 4
Successfully Assigned DBRoots
REMINDER: Update the /etc/fstab on pm2 to include these dbroot mounts

Once completed, start the system back up with the startsystem command.

Moving DBRoots

Before moving a dbroot from 1 module to another, the system must be in a STOPPED state. Dbroots cannot be moved while the system is active.

Syntax

#mcsadmin  movePMDbrootConfig [fromPM] [DBRoot] [toPM] and press Enter.

Note: If your storage is configured as internal and once this command has been executed, you must move the data to the appropriate PMs (i.e., SCP) before the system is restarted.

Example: This example moves DBRoot 6 from PM6 to PM 5

# mcsadmin  movePmDbrootConfig pm6 6 pm5
movepmdbrootconfig Wed Mar 28 11:22:22 2015
DBRoot IDs currently assigned to 'pm6' = 6
DBRoot IDs currently assigned to 'pm5' = 5
DBroot IDs being moved, please wait...
DBRoot IDs newly assigned to 'pm6' =
DBRoot IDs newly assigned to 'pm5' = 5, 6

Adding Modules

Before a modules can be added, system must be ACTIVE or OFFLINE. Once added, they can be placed in-service with the alterSystem-Enable command.

Add Module command

mcsadmin addModule module_type number_of_modules IP_address_or_host_name (separated by commas) root_password

For example, to add two Performance Modules with host names MYHST1 and MYHST2:

mcsadmin addModule pm 2 MYHST1,MYHST2 mypwd

The Calpont.xml is updated to add new modules and the appropriate files are installed to the new modules. If the module addition fails, the mcsadmin displays an error message. Additional details are located in the MariaDB ColumnStore Log Files on the Performance Module #1.

NOTE: When adding Performance Modules with multiple NICs, you must add the host name for all NICs. If you do not, the add module process will fail with invalid parameters.

Adding module to AWS EC2 instances.

To add a module to the System on an Amazon EC2 system, perform one of the following:

  • To accept default module IDs, add multiple modules and have it automatically create the Instances: 
addModule module_type number_of_modules

An example to add two Performance Modules with defaulted instance names, type the following:

addModule pm 2
  • To accept default module IDs, add multiple modules and have it install on existing Instances: 
addModule module_type number_of_modules instance-ids

An example to add two Performance Modules with instance names id-1234890 and id-9876598

addModule pm 2 id-1234890,id-9876598
  • To create IDs manually one at a time and have it automatically create the Instance 
addModule module_ID

For example to add one Performance Module with a default instance name, type the following:

addModule pm2
  • To create IDs manually one at a time and have it install on existing Instance addModule module_ID instance-i For example to add one User Module number 2 with instance name id-100, type the following: 
addModule um2 id-100

Removing modules

Modules can be removed from the system when they are no longer needed or in the event that they need to be taken offline for hardware updates. A module can be removed if it is disabled or if the system is stopped

NOTE: You cannot remove the last um or pm module. To remove a module

  • To remove the last modules added to the system, 
#mcsadmin removeModule module_type number_of_modules

For example, to remove two Performance Modules:

#mcsadmin removeModule pm 2
  • To remove a specific module, 
#mcsadmin removeModule module_ID
<</code>
For example to remove one User Module with module ID UM1285
<<code>>
#mcsadmin removeModule um1285

Comments

Comments loading...
Content reproduced on this site is the property of its respective owners, and this content is not reviewed in advance by MariaDB. The views, information and opinions expressed by this content do not necessarily represent those of MariaDB or any other party.