Limitations and Known Issues within MariaDB MaxScale
Limitations and Known Issues within MariaDB MaxScale
This document lists known issues and limitations in MariaDB MaxScale and its plugins. Since limitations are related to specific plugins, this document is divided into several sections.
In versions 2.1.2 and earlier, the configuration files are limited to 1024 characters per line. This limitation was increased to 16384 characters in MaxScale 2.1.3.
In versions 2.2.12 and earlier, the section names in the configuration files were limited to 49 characters. This limitation was increased to 1023 characters in MaxScale 2.2.13.
The parser of MaxScale correctly parses
WITH statements, but fails to
collect columns, functions and tables used in the
SELECT defining the
Consequently, the database firewall will not block
SELECT of the
WITH clause refers to forbidden columns.
Follow the MXS-1350 Jira issue to track the progress on this limitation.
XA transactions are not detected as transactions by MaxScale. This means that all XA commands will be treated as unknown commands and will be treated as operations that potentially modify the database (in the case of readwritesplit, the statements are routed to the master).
MaxScale will not track the XA transaction state which means that any SELECT queries done inside an XA transaction can be routed to servers that are not part of the XA transaction.
This limitation can be avoided on the client side by disabling autocommit before any XA transactions are done. The following example shows how a simple XA transaction is done via MaxScale by disabling autocommit for the duration of the XA transaction.
SET autocommit=0; XA START 'MyXA'; INSERT INTO test.t1 VALUES(1); XA END 'MyXA'; XA PREPARE 'MyXA'; XA COMMIT 'MyXA'; SET autocommit=1;
For its proper functioning, MaxScale needs in general to be aware of the transaction state and autocommit mode. In order to be that, MaxScale parses statements going through it.
However, if a transaction is commited or rolled back, or the autocommit mode is changed using a prepared statement, MaxScale will miss that and its internal state will be incorrect, until the transaction state or autocommit mode is changed using an explicit statement.
For instance, after the following sequence of commands, MaxScale will still think autocommit is on:
set autocommit=1 PREPARE hide_autocommit FROM "set autocommit=0" EXECUTE hide_autocommit
To ensure that MaxScale functions properly, do not commit or rollback a transaction or change the autocommit mode using a prepared statement.
Limitations with MySQL/MariaDB Protocol support (MariaDBClient)
Compression is not included in the server handshake.
MariaDB MaxScale does not support
KILL QUERY ID <query_id>type statements. If a query by a query ID is to be killed, it needs to be done directly on the backend databases.
KILLcommands are executed asynchronously and the results are ignored. Due to this, they will always appear to succeed even if the user is lacking the permissions.
Limitations in the GSSAPI authenticator
Currently, MariaDB MaxScale only supports GSSAPI authentication when the backend connections use GSSAPI authentication. Client side GSSAPI authentication with a different backend authentication module is not supported.
Limitations in the MySQL authenticator (MySQLAuth)
MySQL old style passwords are not supported. MySQL versions 4.1 and newer use a new authentication protocol which does not support pre-4.1 style passwords.
When users have different passwords based on the host from which they connect MariaDB MaxScale is unable to determine which password it should use to connect to the backend database. This results in failed connections and unusable usernames in MariaDB MaxScale.
Only a subset of netmasks are supported for the Host-column in the mysql.user-table (and related tables). Specifically, if the Host is of the form
base_ip/netmask, then the netmask must only contain the numbers 0 or 255. For example, a netmask of 255.255.255.0 is fine while 255.255.255.192 is not.
Database Firewall limitations (dbfwfilter)
The Database Firewall filter does not support multi-statements. Using them will result in an error being sent to the client.
Tee filter limitations (tee)
The Tee filter does not support binary protocol prepared statements. The execution of a prepared statements through a service that uses the tee filter is not guaranteed to succeed on the service where the filter branches to as it does on the original service.
This possibility exists due to the fact that the binary protocol prepared statements are identified by a server-generated ID. The ID sent to the client from the main service is not guaranteed to be the same that is sent by the branch service.
A server can only be monitored by one monitor. Two or more monitors monitoring the same server is considered an error.
Limitations with Galera Cluster Monitoring (galeramon)
The default master selection is based only on MIN(wsrep_local_index). This can be influenced with the server priority mechanic described in the Galera Monitor manual.
Avrorouter limitations (avrorouter)
The avrorouter does not support the following data types, conversions or SQL statements:
- Fields CAST from integer types to string types
- CREATE TABLE ... AS SELECT statements
The avrorouter does not do any crash recovery. This means that the avro files need to be truncated to valid block lengths before starting the avrorouter.
The avrorouter does not support binlog checksums. They must must not be used in any of the binlogs that the avrorouter will process.
Follow MXS-1341 for progress on this issue.
Limitations in the connection router (readconnroute)
Sending of binary data with
LOAD DATA LOCAL INFILE is not supported.
Limitations in the Read/Write Splitter (readwritesplit)
Read queries are routed to the master server in the following situations:
- query is executed inside an open transaction
- statement includes a stored procedure or an UDF call
- if there are multiple statements inside one query e.g.
INSERT INTO ... ; SELECT LAST_INSERT_ID();
JDBC Batched Statements
Readwritesplit does not support pipelining of JDBC batched statements. This is caused by the fact that readwritesplit executes the statements one at a time to track the state of the response.
Limitations in multi-statement handling
When a multi-statement query is executed through the readwritesplit router, it
will always be routed to the master. See
strict_multi_stmt for more
Execution of LOAD DATA LOCAL INFILE statements inside a multi-statement query is not supported. If one is executed MaxScale will most likely hang (see MXS-1828).
Limitations in client session handling
Some of the queries that a client sends are routed to all backends instead of
just to one. These queries include
USE <db name> and
SET autocommit=0, among
many others. Readwritesplit sends a copy of these queries to each backend server
and forwards the master's reply to the client. Below is a list of MySQL commands
which are classified as session commands.
COM_INIT_DB (USE <db name> creates this) COM_CHANGE_USER COM_STMT_CLOSE COM_STMT_SEND_LONG_DATA COM_STMT_RESET COM_STMT_PREPARE COM_QUIT (no response, session is closed) COM_REFRESH COM_DEBUG COM_PING SQLCOM_CHANGE_DB (USE ... statements) SQLCOM_DEALLOCATE_PREPARE SQLCOM_PREPARE SQLCOM_SET_OPTION SELECT ..INTO variable|OUTFILE|DUMPFILE SET autocommit=1|0
Session commands that are 2²⁴ - 1 bytes or longer are not supported and cause the session to be closed.
There is a possibility for misbehavior. If
USE mytable is executed in one of
the slaves and fails, it may be due to replication lag rather than the database
not existing. Thus, the same command may produce different result in different
backend servers. The slaves which fail to execute a session command will be
dropped from the active list of slaves for this session to guarantee a
consistent session state across all the servers used by the session. In
addition, the server will not used again for routing for the duration of the
The above-mentioned behavior for user variables can be partially controlled with
the configuration parameter
use_sql_variables_in=[master|all] (default: all)
If a SELECT query modifies a user variable when the
parameter is set to
all, it will not be routed and the client will receive an
error. A log message is written into the log further explaining the reason for
the error. Here is an example use of a SELECT query which modifies a user
variable and how MariaDB MaxScale responds to it.
MySQL [(none)]> set @id=1; Query OK, 0 rows affected (0.00 sec) MySQL [(none)]> SELECT @id := @id + 1 FROM test.t1; ERROR 1064 (42000): Routing query to backend failed. See the error log for further details.
Allow user variable modification in SELECT queries by setting
use_sql_variables_in=master. This will route all queries that use user
variables to the master.
Schemarouter limitations (schemarouter)
The schemarouter currently has some limitations due to the nature of the sharding implementation and the way the session variables are detected and routed. Here is a list of the current limitations:
Cross-database queries (e.g.
SELECT column FROM database1.table UNION select column FROM database2.table) are not supported and are routed either to the first explicit database in the query, the current database in use or to the first available database, depending on which succeeds.
Without a default database, queries without explicit databases that do not modify the session state will be routed to the first available server. This means that, for example when creating a new database, queries should be done directly on the node or the router should be equipped with the hint filter and a routing hint should be used. Queries that modify the session state (e.g.
SET autocommit=1) will be routed to all servers regardless of the default database.
SELECT queries that modify session variables are not currently supported because uniform results can not be guaranteed. If such a query is executed, the behavior of the router is undefined. To work around this limitation, the query must be executed in separate parts.
If a query targets a database the schemarouter hasn't mapped to a server, the query will be routed to the first available server. This possibly returns an error about database rights instead of a missing database.
The preparation of a prepared statement is routed to all servers. The execution of a prepared statement is routed to the first available server or to the server pointed by a routing hint attached to the query. In practice this means that prepared statements aren't supported by the schemarouter.