XtraDB/InnoDB Server System Variables

See Server System Variables for a complete list of system variables and instructions on setting them.

See also the Full list of MariaDB options, system and status variables.

have_innodb

• Description: If the server supports InnoDB tables, will be set to YES, otherwise will be set to NO. Removed in MariaDB 10.0 - SHOW ENGINES can be used instead.
• Scope: Global
• Dynamic: No
• Removed: MariaDB 10.0

---

ignore_builtin_innodb

• Description: In older versions of MariaDB, setting this to 1 resulted in the built in InnoDB storage engine to be ignored. In MariaDB 5.5, InnoDB is the default and is always present, so this variable is ignored and setting it results in a warning. From MariaDB 10.0.1 to MariaDB 10.0.8, when InnoDB was still the default instead of XtraDB, this variable needed to be set.
• Commandline: --ignore-builtin-innodb
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Deprecated: MariaDB/MySQL 5.5.22

---

innodb_adaptive_checkpoint

• Description: Replaced with innodb_adaptive_flushing_method. Controls adaptive checkpointing. InnoDB's fuzzy checkpointing can cause stalls, as many dirty blocks are flushed at once as the checkpoint age nears the maximum. Adaptive checkpointing aims for more consistent flushing, approximately modified age / maximum checkpoint age. Can result in larger transaction log files
  • reflex Similar to innodb_max_dirty_pages_pct flushing but flushes blocks constantly and contiguously based on the oldest modified age. If the age exceeds 1/2 of the maximum age capacity, flushing will be weak contiguous. If the age exceeds 3/4, flushing will be strong. Strength can be adjusted by the variable innodb_io_capacity.
  • estimate The default, and independent of innodb_io_capacity. If the oldest modified age exceeds 1/2 of the maximum age capacity, blocks will be flushed every second at a rate determined by the number of modified blocks, LSN progress speed and the average age of all modified blocks.
  • keep_average Attempts to keep the I/O rate constant by using a shorter loop cycle of one tenth of a second. Designed for SSD cards.
• Commandline: --innodb-adaptive-checkpoint=#
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: estimate
• Valid Values: none or 0, reflex or 1, estimate or 2, keep_average or 3
• Introduced: XtraDB 5.1.54-12.5
• Removed: XtraDB 5.5 - replaced with innodb_adaptive_flushing_method

---

innodb_adaptive_flushing

• Description: If set to 1, the default, the server will dynamically adjust the flush rate of dirty pages in the InnoDB buffer pool. This assists to reduce brief bursts of I/O activity.
• Commandline: --innodb-adaptive-flushing=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: ON

---

innodb_adaptive_flushing_lwm

• Description: Adaptive flushing is enabled when this this low water mark percentage of the redo log capacity is reached.
• Commandline: --innodb-adaptive-flushing-lwm=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 10
• Range: 0 to 70
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_adaptive_flushing_method

• Description: Determines the method of flushing dirty blocks from the InnoDB buffer pool. If set to native or 0, the original InnoDB method is used. The maximum checkpoint age is determined by the total length of all transaction log files. When the checkpoint age reaches the maximum checkpoint age, blocks are flushed. This can cause lag if there are many updates per second and many blocks with an almost identical age need to be flushed. If set to estimate or 1, the default, the oldest modified age will be compared with the maximum age capacity. If it's more than 1/4 of this age, blocks are flushed every second. The number of blocks flushed is determined by the number of modified blocks, the LSN progress speed and the average age of all modified blocks. It's therefore independent of the innodb_io_capacity for the 1-second loop, but not entirely so for the 10-second loop. If set to keep_average or 2, designed specifically for SSD cards, a shorter loop cycle is used in an attempt to keep the I/O rate constant. Removed in MariaDB 10.0/XtraDB 5.6 and replaced with InnoDB flushing method from MySQL 5.6.
• Commandline: innodb-adaptive-flushing-method=value
• Scope: Global
• Dynamic: Yes
• Data Type: enumeration
• Default Value: estimate
• Valid Values: native or 0, estimate or 1, #keep_average or 2
• Introduced: XtraDB 5.5.8-20
• Removed: MariaDB 10.0/XtraDB 5.6 - replaced with InnoDB flushing method from MySQL 5.6

---

innodb_adaptive_hash_index

• Description: If set to 1, the default, the InnoDB hash index is enabled.
• Commandline: --innodb-adaptive-hash-index=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: ON

---

innodb_adaptive_hash_index_partitions

• Description: Specifies the number of partitions for use in adaptive searching. If set to 1, no extra partitions are created.
• Commandline: innodb-adaptive-hash-index-partitions=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 1
• Range - 32 bit: 1 to 32
• Range - 64 bit: 1 to 64
• Introduced: MariaDB 5.5 / XtraDB 5.5.8-20.0

---

innodb_adaptive_max_sleep_delay

• Description: Maximum time in microseconds to automatically adjust the innodb_thread_sleep_delay value to, based on the workload. Useful in extremely busy systems with hundreds of thousands of simultaneous connections.
• Commandline: --innodb-adaptive-max-sleep-delay=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 150000
• Range: 0 to 1000000
• Introduced: MariaDB 10.0

---

innodb_additional_mem_pool_size

• Description: Size in bytes of the InnoDB memory pool used for storing information about internal data structures. Defaults to 8MB, if your application has many tables and a large structure, and this is exceeded, operating system memory will be allocated and warning messages written to the error log, in which case you should increase this value.
• Commandline: --innodb-additional-mem-pool-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 8388608
• Range: 2097152 to 4294967295

---

innodb_api_bk_commit_interval

• Description: Time in seconds between auto-commits for idle connections using the InnoDB memcached interface (not implemented in MariaDB).
• Commandline: --innodb-api-bk-commit-interval=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 5
• Range: 1 to 1073741824
• Introduced: MariaDB 10.0 / MySQL 5.6.7

---

innodb_api_disable_rowlock

• Description: For use with MySQL's memcached (not implemented in MariaDB)
• Commandline: --innodb-api-disable-rowlock=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0 / MySQL 5.6.6

---

innodb_api_enable_binlog

• Description: For use with MySQL's memcached (not implemented in MariaDB)
• Commandline: --innodb-api-enable-binlog=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0 / MySQL 5.6.6

---

innodb_api_enable_mdl

• Description: For use with MySQL's memcached (not implemented in MariaDB)
• Commandline: --innodb-api-enable-mdl=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0 / MySQL 5.6.6

---

innodb_api_trx_level

• Description: For use with MySQL's memcached (not implemented in MariaDB)
• Commandline: --innodb-api-trx-level=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Introduced: MariaDB 10.0 / MySQL 5.6.6

---

innodb_auto_lru_dump

• Description: Renamed innodb_buffer_pool_restore_at_startup since XtraDB 5.5.10-20.1, which was in turn replaced by innodb_buffer_pool_load_at_startup in MariaDB 10.0.
• Commandline: --innodb-auto-lru-dump=#
• Removed: XtraDB 5.5.10-20.1

---

innodb_autoextend_increment

• Description: Size in MB to increment an auto-extending shared tablespace file when it becomes full. If innodb_file_per_table was set to 1, this setting does not apply to the resulting per-table tablespace files, which are automatically extended in their own way.
• Commandline: --innodb-autoextend-increment=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 64 (from MariaDB 10.0) 8 (before MariaDB 10.0),
• Range: 1 to 1000

---

innodb_autoinc_lock_mode

• Description: Locking mode used for generating auto-increment values. 0 is the traditional lock mode, 1 the consecutive, and 2 the interleaved. See AUTO_INCREMENT handling in XtraDB/InnoDB for more on the lock modes. In order to use Galera, the mode needs to be set to 2.
• Commandline: --innodb-autoinc-lock-mode=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 1
• Range: 0 to 2

---

innodb_background_scrub_data_check_interval

• Description: Check if spaces needs scrubbing every innodb_background_scrub_data_check_interval seconds. See Data Scrubbing.
• Commandline: --innodb-background-scrub-data-check-interval=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 3600
• Range: 1 to 4294967295
• Introduced: MariaDB 10.1.3

---

innodb_background_scrub_data_compressed

• Description: Enable scrubbing of compressed data by background threads (same as encryption_threads). See Data Scrubbing.
• Commandline: --innodb-background-scrub-data-compressed={0|1}
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: 0
• Introduced: MariaDB 10.1.3

---

innodb_background_scrub_data_interval

• Description: Scrub spaces that were last scrubbed longer than this number of seconds ago. See Data Scrubbing.
• Commandline: --innodb-background-scrub-data-interval=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 604800
• Range: 1 to 4294967295
• Introduced: MariaDB 10.1.3

---

innodb_background_scrub_data_uncompressed

• Description: Enable scrubbing of uncompressed data by background threads (same as encryption_threads). See Data Scrubbing.
• Commandline: --innodb-background-scrub-data-uncompressed={0|1}
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: 0
• Introduced: MariaDB 10.1.3

---

innodb_blocking_buffer_pool_restore

• Description: If set to 1 (0 is default), XtraDB will wait until the LRU dump is completely restored upon restart before reporting back to the server that it has successfully started up.
• Commandline: innodb-blocking-buffer-pool-restore={1|2}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: XtraDB 5.5.16-22.0

---

innodb_buffer_pool_dump_at_shutdown

• Description: Whether to record pages cached in the buffer pool on server shutdown, which reduces the length of the warmup the next time the server starts. The related innodb_buffer_pool_load_at_startup specifies whether the buffer pool is automatically warmed up at startup.
• Commandline: --innodb-buffer-pool-dump-at-shutdown=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0

---

innodb_buffer_pool_dump_now

• Description: Immediately records pages stored in the buffer pool. The related innodb_buffer_pool_load_now does the reverse, and will immediately warm up the buffer pool.
• Commandline: --innodb-buffer-pool-dump-now=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0

---

innodb_buffer_pool_filename

• Description: The file that holds the buffer pool list of page numbers set by innodb_buffer_pool_dump_at_shutdown and innodb_buffer_pool_dump_now.
• Commandline: --innodb-buffer-pool-filename=file
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: ib_buffer_pool
• Introduced: MariaDB 10.0

---

innodb_buffer_pool_instances

• Description: If innodb_buffer_pool_size is set to more than 1GB, innodb_buffer_pool_instances divides the InnoDB buffer pool into this many instances. The default was 1 in MariaDB 5.5, but for large systems with buffer pools of many gigabytes, many instances can help reduce contention concurrency. The default is 8 in MariaDB 10 (except on Windows 32-bit, where it varies according to innodb_buffer_pool_size). Each instance manages its own data structures and takes an equal portion of the total buffer pool size, so for example if innodb_buffer_pool_size is 4GB and innodb_buffer_pool_instances is set to 4, each instance will be 1GB. Each instance should ideally be at least 1GB in size.
• Commandline: --innodb-buffer-pool-instances=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value - <= MariaDB 10.0.3: 1
• Default Value - >= MariaDB 10.0.4: 8 or dependent on innodb_buffer_pool_size (Windows 32-bit)
• Introduced: MariaDB/MySQL 5.5.4

---

innodb_buffer_pool_load_abort

• Description: Aborts the process of restoring buffer pool contents started by innodb_buffer_pool_load_at_startup or #innodb_buffer_pool_load_now|innodb_buffer_pool_load_now]].
• Commandline: --innodb-buffer-pool-load-abort=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0

---

innodb_buffer_pool_load_at_startup

• Description: Specifies whether the buffer pool is automatically warmed up when the server starts by loading the pages held earlier. The related innodb_buffer_pool_dump_at_shutdown specifies whether pages are saved at shutdown.
• Commandline: --innodb-buffer-pool-load-at-startup=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0

---

innodb_buffer_pool_load_now

• Description: Immediately warms up the buffer pool by loading the stored data pages. The related innodb_buffer_pool_dump_now does the reverse, and immediately records pages stored in the buffer pool.
• Commandline: --innodb-buffer-pool-load-now=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0

---

innodb_buffer_pool_populate

• Description: When set to 1 (0 is default), XtraDB will preallocate pages in the buffer pool on starting up so that NUMA allocation decisions are made while the buffer cache is still clean.
• Commandline: innodb-buffer-pool-populate={0|1}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 5.5 / XtraDB 5.5.28-29.1

---

innodb_buffer_pool_restore_at_startup

• Description: Time in seconds between automatic buffer pool dumps. If set to a non-zero value, XtraDB will also perform an automatic restore of the buffer pool at startup. If set to 0, automatic dumps are not performed, nor automatic restores on startup. Replaced by innodb_buffer_pool_load_at_startup in MariaDB 10.0.
• Commandline: innodb-buffer-pool-restore-at-startup
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range - 32 bit: 0 to 4294967295
• Range - 64 bit: 0 to 18446744073709547520
• Introduced: XtraDB 5.5.10-20.1
• Removed: MariaDB 10.0/XtraDB 5.6 - replaced by innodb_buffer_pool_load_at_startup

---

innodb_buffer_pool_shm_checksum

• Description: Used with Percona's SHM buffer pool patch in XtraDB 5.5. Later deprecated in XtraDB 5.5, and removed in XtraDB 5.6.
• Commandline: innodb-buffer-pool-shm-checksum={0|1}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: ON
• Introduced: XtraDB 5.5
• Deprecated: XtraDB 5.5.13-20.4
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_buffer_pool_shm_key

• Description: Used with Percona's SHM buffer pool patch in XtraDB 5.5. Later deprecated in XtraDB 5.5, and removed in XtraDB 5.6.
• Commandline: innodb-buffer-pool-shm-key={0|1}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: 0
• Introduced: XtraDB 5.5
• Deprecated: XtraDB 5.5.13-20.4
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_buffer_pool_size

• Description: InnoDB buffer pool size in bytes. The primary value to adjust on a database server with entirely/primarily XtraDB/InnoDB tables, can be set up to 80% of the total memory in these environments. If set to 2 GB or more, you will probably want to adjust innodb_buffer_pool_instances as well. See the XtraDB/InnoDB Buffer Pool for more on setting this variable.
• Commandline: --innodb-buffer-pool-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 134217728 (128MB)
• Maximum Value - 32 bit: 4294967295 (2³²-1 or 4096MB)
• Maximum Value - 64 bit: 18446744073709551615 (2⁶⁴-1)

---

innodb_change_buffer_max_size

• Description: Maximum size of the XtraDB/InnoDB Change Buffer as a percentage of the total buffer pool. The default is 25%, and this can be increased up to 50% for servers with high write activity, and lowered down to 0 for servers used exclusively for reporting.
• Commandline: --innodb-change-buffer-max-size=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 25
• Range: 0 to 50
• Introduced: MariaDB 10.0

---

innodb_change_buffering

• Description: Sets how InnoDB change buffering is performed. See XtraDB/InnoDB Change Buffering for details on the settings.
• Commandline: --innodb-change-buffering=#
• Scope: Global
• Dynamic: Yes
• Data Type: enumeration
• Default Value - <= MariaDB/MySQL 5.5.3: inserts
• Default Value - >= MariaDB/MySQL 5.5.4: all
• Valid Values - <= MariaDB/MySQL 5.5.3: inserts, none
• Valid Values - >= MariaDB/MySQL 5.5.4: inserts, none, deletes, purges, changes, all

---

innodb_checkpoint_age_target

• Description: The maximum value of the checkpoint age. If set to 0, has no effect. Removed in MariaDB 10.0/XtraDB 5.6 and replaced with InnoDB flushing method from MySQL 5.6.
• Commandline: innodb-checkpoint-age-target=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 upwards
• Removed: MariaDB 10.0/XtraDB 5.6 - replaced with InnoDB flushing method from MySQL 5.6.

---

innodb_checksum_algorithm

• Description: A replacement for InnoDB's innodb_checksums and XtraDB's innodb_fast_checksum, specifies how the InnoDB tablespace checksum is generated and verified.
  • innodb: Backwards compatible with earlier versions.
  • crc32: A newer, faster algorithm, but incompatible with earlier versions. Tablespace blocks will be converted to the new format over time, meaning that a mix of checksums may be present.
  • none: Writes a constant rather than calculate a checksum.
  • strict_*: The strict_* options are the same as the regular options, but InnoDB will halt if it comes across a mix of checksum values. These are faster, as both new and old checksum values are not required, but can only be used when setting up tablespaces for the first time.
• Commandline: --innodb-checksum-algorithm=#
• Scope: Global
• Dynamic: Yes
• Data Type: enumeration
• Default Value: innodb
• Valid Values: innodb, crc32, none, strict_innodb, strict_crc32, strict_none
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_checksums

• Description: By default, InnoDB performs checksum validation on all pages read from disk, which provides extra fault tolerance. You would usually want this set to 1 in production environments, although setting it to 0 can provide marginal performance improvements. Replaced by innodb_checksum_algorithm in MariaDB 10.0, and should be removed to avoid conflicts. ON is equivalent to --innodb_checksum_algorithm=innodb and OFF to --innodb_checksum_algorithm=none.
• Commandline: --innodb-checksums, --skip-innodb-checksums
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: ON
• Deprecated: MariaDB 10.0

---

innodb_cleaner_lsn_age_factor

• Description: XtraDB has enhanced page cleaner heuristics, and with these in place, the default InnoDB adaptive flushing may be too aggressive. As a result, a new LSN age factor formula has been introduced, controlled by this variable. The default setting, high_checkpoint, uses the new formula, while the alternative, legacy, uses the original algorithm.
• Commandline: --innodb-cleaner-lsn-age-factor=value
• Scope: Global
• Dynamic: Yes
• Data Type: enum
• Default Value: high_checkpoint
• Valid Values: high_checkpoint, legacy
• Introduced: MariaDB 10.0.9 / XtraDB 5.6.13-61.0

---

innodb_cmp_per_index_enabled

• Description: If set to ON (OFF is default), per-index compression statistics are stored in the INFORMATION_SCHEMA.INNODB_CMP_PER_INDEX table. These are expensive to record, so this setting should only be changed with care, such as for performance tuning on development or slave servers.
• Commandline: --innodb-cmp-per-index-enabled=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0

---

innodb_commit_concurrency

• Description: Limit to the number of transaction threads that can can commit simultaneously. 0, the default, imposes no limit. While you can change from one positive limit to another at runtime, you cannot set this variable to 0, or change it from 0, while the server is running.
• Commandline: --innodb-commit-concurrency=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 to 1000

---

innodb_compression_algorithm

• Description: Compression algorithm used on page compression. Can only be set to supported values. Not all distributions support all these compression methods. See Choosing compression algorithm.
  • none: Default. Data is not compressed.
  • zlib: Pages are compressed with bundled zlib compression method.
  • lz4: Pages are compressed using https://code.google.com/p/lz4/ compression method.
  • lzo: Pages are compressed using http://www.oberhumer.com/opensource/lzo/ compression method.
  • lzma: Pages are compressed using http://tukaani.org/xz/ compression method.
  • bzip2: Pages are compressed using http://www.bzip.org/ compression method.
  • snappy: Pages are compressed using https://code.google.com/p/snappy/ (from MariaDB 10.1.3).
• Commandline: --innodb-compression-algorithm=value
• Scope: Global
• Dynamic: Yes
• Data Type: enum
• Default Value: none
• Valid Values:none, zlib, lz4, lzo, lzma, bzip2 or snappy (MariaDB 10.1.3)
• Introduced: MariaDB 10.1.0

---

innodb_compression_failure_threshold_pct

• Description: Specifies the percentage cutoff for expensive compression failures during updates to a compressed table, after which free space is added to each new compressed page, dynamically adjusted up to the level set by innodb_compression_pad_pct_max. Zero disables checking of compression efficiency and adjusting padding.
• Commandline: --innodb-compression-failure-threshold-pct=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 5
• Range: 0 to 100
• Introduced: MariaDB 10.0

---

innodb_compression_level

• Description: The level of zlib compression, from 1 to 9, used with InnoDB compressed tables and indexes. 1 gives the best speed, 9 the best compression. Defaults to 6. Note that not all compression methods allow choosing the compression level and in those cases the compression level value is ignored. See InnoDB/XtraDB Page Compression.
• Commandline: --innodb-compression-level=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 6
• Range: 0 to 9
• Introduced: MariaDB 10.0

---

innodb_compression_pad_pct_max

• Description: The maximum percentage of reserved free space within each compressed page. Reserved free space is used when the page's data is reorganized and might be recompressed. Only used when innodb_compression_failure_threshold_pct is not zero, and the rate of compression failures exceeds its setting.
• Commandline: --innodb-compression-pad-pct-max=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 50
• Range: 0 to 75
• Introduced: MariaDB 10.0

---

innodb_concurrency_tickets

• Description: Number of times a newly-entered thread can enter and leave InnoDB until it is again subject to the limitations of innodb_thread_concurrency and may possibly be queued.
• Commandline: --innodb-concurrency-tickets=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 5000 (from MariaDB 10.0), 500 (before mariaDB 10,0)

---

innodb_corrupt_table_action

• Description: When set to assert, the default, XtraDB will intentionally crash the server when it detects corrupted data in a single-table tablespace, with an assertion failure. When set to warn, it will pass corruption as corrupt table instead of crashing, and disable all further I/O (except for deletion) on the table file. If set to salvage, read access is permitted, but corrupted pages are ignored. innodb_file_per_table must be enabled for this option. Previously named innodb_pass_corrupt_table.
• Commandline: innodb-corrupt-table-action=value
• Scope: Global
• Dynamic: Yes
• Data Type: enumeration
• Default Value: assert
• Valid Values: assert, warn, salvage
• Introduced: XtraDB 5.5.10-20.1

---

innodb_data_file_path

• Description: Individual InnoDB data files, paths and sizes. The value of innodb_data_home_dir is joined to each path specified by innodb_data_file_path to get the full directory path. If innodb_data_home_dir is an empty string, absolute paths can be specified here. A file size is specified with K for kilobytes, M for megabytes and G for gigabytes, and whether or not to autoextend the data file is also specified.
• Commandline: --innodb-data-file-path=name
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: ibdata1:12M:autoextend (from MariaDB 10.0), ibdata1:10M:autoextend (before MariaDB 10.0)

---

innodb_data_home_dir

• Description: Directory path for all InnoDB data files in the shared tablespace (assuming innodb_file_per_table is not enabled). File-specific information can be added in innodb_data_file_path, as well as absolute paths if innodb_data_home_dir is set to an empty string.
• Commandline: --innodb-data-home-dir=path
• Scope: Global
• Dynamic: No
• Data Type: directory name
• Default Value: The MariaDB data directory

---

innodb_default_page_encryption_key

• Description: Encryption key used for page encryption. See Table and Tablespace Encryption.
• Commandline: --innodb-default-page-encryption-key=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1
• Range: 1 to 255
• Introduced: MariaDB 10.1.3

---

innodb_defragment

• Description: When set to 1 (the default is 0), InnoDB defragmentation is enabled. When set to FALSE, all existing defragmentation will be paused and new defragmentation commands will fail. Paused defragmentation commands will resume when this variable is set to true again. See Defragmenting InnoDB Tablespaces.
• Commandline: --innodb-defragment=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.1.1

---

innodb_defragment_fill_factor

• Description:. Indicates how full defragmentation should fill a page. Together with innodb_defragment_fill_factor_n_recs ensures defragmentation won’t pack the page too full and cause page split on the next insert on every page. The variable indicating more defragmentation gain is the one effective. See Defragmenting InnoDB Tablespaces.
• Commandline: --innodb-defragment-fill-factor=#
• Scope: Global
• Dynamic: Yes
• Data Type: double
• Default Value: 0.9
• Range: 0.7 to 1
• Introduced: MariaDB 10.1.1

---

innodb_defragment_fill_factor_n_recs

• Description: Number of records of space that defragmentation should leave on the page. This variable, together with innodb_defragment_fill_factor, is introduced so defragmentation won't pack the page too full and cause page split on the next insert on every page. The variable indicating more defragmentation gain is the one effective. See Defragmenting InnoDB Tablespaces.
• Commandline: --innodb-defragment-fill-factor-n-recs=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 20
• Range: 1 to 100
• Introduced: MariaDB 10.1.1

---

innodb_defragment_frequency

• Description: Maximum times per second for defragmenting a single index. This controls the number of times the defragmentation thread can request X_LOCK on an index. The defragmentation thread will check whether 1/defragment_frequency (s) has passed since it last worked on this index, and put the index back in the queue if not enough time has passed. The actual frequency can only be lower than this given number. See Defragmenting InnoDB Tablespaces.
• Commandline: --innodb-defragment-frequency=#
• Scope: Global
• Dynamic: Yes
• Data Type: integer
• Default Value: 40
• Range: 1 to 1000
• Introduced: MariaDB 10.1.1

---

innodb_defragment_n_pages

• Description: Number of pages considered at once when merging multiple pages to defragment. See Defragmenting InnoDB Tablespaces.
• Commandline: --innodb-defragment-n-pages=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 7
• Range: 2 to 32
• Introduced: MariaDB 10.1.1

---

innodb_defragment_stats_accuracy

• Description: Number of defragment stats changes there are before the stats are written to persistent storage. Defaults to zero, meaning disable defragment stats tracking. See Defragmenting InnoDB Tablespaces.
• Commandline: --innodb-defragment-stats-accuracy=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 to 4294967295
• Introduced: MariaDB 10.1.1

---

innodb_dict_size_limit

• Description: Size in bytes of a soft limit the memory used by tables in the data dictionary. Once this limit is reached, XtraDB will attempt to remove unused entries. If set to 0, the default and standard InnoDB behavior, there is no limit to memory usage. Removed in MariaDB 10.0/XtraDB 5.6 and replaced by MySQL 5.6's new table_definition_cache implementation.
• Commandline: innodb-dict-size-limit=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Default Value - 32 bit: 2147483648
• Default Value - 64 bit: 9223372036854775807
• Introduced: XtraDB 5.0.77-b13
• Removed: MariaDB 10.0/XtraDB 5.6 - replaced by MySQL 5.6's new table_definition_cache implementation.

---

innodb_disable_sort_file_cache

• Description: If set to 1 (0 is default), the operating system file system cache for merge-sort temporary files is disabled.
• Commandline: --innodb-disable-sort-file-cache=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_disallow_writes

• Description: Tell InnoDB to stop any writes to disk.
• Commandline: None
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.1.3

---

innodb_doublewrite

• Description: If set to 1, the default, to improve fault tolerance InnoDB first stores data to a doublewrite buffer before writing it to data file. Disabling will provide a marginal peformance improvement.
• Commandline: --innodb-doublewrite, --skip-innodb-doublewrite
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: ON

---

innodb_doublewrite_file

• Description: The absolute or relative path and filename to a dedicated tablespace for the doublewrite buffer. In heavy workloads, the doublewrite buffer can impact heavily on the server, and moving it to a different drive will reduce contention on random reads. Since the doublewrite buffer is mostly sequential writes, a traditional HDD is a better choice than SSD. This Percona XtraDB variable has not been ported to XtraDB 5.6.
• Commandline: innodb-doublewrite-file=filename
• Scope: Global
• Dynamic: No
• Data Type: filename
• Default Value: NULL
• Introduced: XtraDB 5.5.8-20.0
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_empty_free_list_algorithm

• Description: XtraDB 5.6.13-61 introduced an algorithm to assist with reducing mutex contention when the buffer pool free list is empty, controlled by this variable. If set to backoff, the default, the new algorithm will be used. If set to legacy, the original InnoDB algorithm will be used.
• Commandline: innodb-empty-free-list-algorithm=value
• Scope: Global
• Dynamic: Yes
• Data Type: enum
• Default Value: backoff
• Valid Values: backoff, legacy
• Introduced: MariaDB 10.0.9 / XtraDB 5.6.13-61.0

---

innodb_enable_unsafe_group_commit

• Description: Unneeded after XtraDB 1.0.5. If set to 0, the default, InnoDB will keep transactions between the transaction log and binary logs in the same order. Safer, but slower. If set to 1, transactions can be group-committed, but there is no guarantee of the order being kept, and a small risk of the two logs getting out of sync. In write-intensive environments, can lead to a significant improvement in performance.
• Commandline: --innodb-enable-unsafe-group-commit
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 to 1
• Removed: Not needed after XtraDB 1.0.5

---

innodb_encrypt_log

• Description: Enable redo log encryption/decryption. See Table and Tablespace Encryption.
• Commandline: --innodb-encrypt-log
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.1.3

---

innodb_encrypt_tables

• Description: Encrypt all tables in the storage engine. See Table and Tablespace Encryption. The FORCE option (from 10.1.4) means that XtraDB/InnoDB will refuse to create unencrypted tables (CREATE TABLE ... ENCRYPTED=NO will fail).
• Commandline: --innodb-encrypt-tables=value
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Valid Values: ON, OFF, FORCE (from MariaDB 10.1.4)
• Introduced: MariaDB 10.1.3

---

innodb_encryption_rotate_key_age

• Description: Rotate any page having a key older than this. See Table and Tablespace Encryption.
• Commandline: --innodb-encryption-rotate-key-age=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1
• Range: 0 to 4294967295
• Introduced: MariaDB 10.1.3

---

innodb_encryption_rotation_iops

• Description: Use this many iops for background key rotation. See Table and Tablespace Encryption.
• Commandline: --innodb-encryption-rotation_iops=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 100
• Range: 0 to 4294967295
• Introduced: MariaDB 10.1.3

---

innodb_encryption_threads

• Description: Number of threads performing background key rotation and scrubbing. See Table and Tablespace Encryption.
• Commandline: --innodb-encryption-threads=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: -
• Range: 0 to 4294967295
• Introduced: MariaDB 10.1.3

---

innodb_extra_rsegments

• Description: Removed in XtraDB 5.5 and replaced by innodb_rollback_segments. Usually there is one rollback segment protected by single mutex, a source of contention in high write environments. This option specifies a number of extra user rollback segments. Changing the default will make the data readable by XtraDB only, and is incompatible with InnoDB. After modifying, the server must be slow-shutdown. If there is existing data, it must be dumped before changing, and re-imported after the change has taken effect.
• Commandline: ==innodb-extra-rsegments=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 0
• Range: 0 to 126
• Introduced: XtraDB 5.1
• Removed: XtraDB 5.5 - replaced by innodb_rollback_segments

---

innodb_extra_undoslots

• Description: Usually, InnoDB has 1024 undo slots in its rollback segment, so 1024 transactions can run in parallel. New transactions will fail if all slots are used. Setting this variable to 1 expands the available undo slots to 4072. Not recommended unless you get the Warning: cannot find a free slot for an undo log error in the error log, as it makes data files unusable for ibbackup, or MariaDB servers not run with this option. See also undo log.
• Commandline: --innodb-extra-undoslots=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: XtraDB 5.1

---

innodb_fake_changes

• Description: Enables the fake changes feature. In replication, setting up or restarting a slave can cause a replication reads to perform more slowly, as MariaDB is single-threaded and needs to read the data before it can execute the queries. This can be speeded up by prefetching threads to warm the server, replaying the statements and then rolling back at commit. This however has a overhead from locking rows only then to undo changes at rollback. Fake changes attempts to reduce this overhead by reading the rows for INSERT, UPDATE and DELETE statements but not updating them. The rollback is then very fast with little or nothing to do.
• Scope: Global, Session
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 5.5 / XtraDB 5.5.16-22.0

---

innodb_fast_checksum

• Description: Implements a more CPU efficient XtraDB checksum algorithm, useful for write-heavy loads with high I/O. If set to 1 on a server with tables that have been created with it set to 0, reads will be slower, so tables should be recreated (dumped and reloaded). XtraDB will fail to start if set to 0 and there are tables created while set to 1. Replaced with innodb_checksum_algorithm in MariaDB 10.0/XtraDB 5.6.
• Commandline: --innodb-fast-checksum={0|1}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Deprecated: XtraDB 5.5.28-29.2
• Removed: MariaDB 10.0/XtraDB 5.6 - replaced with innodb_checksum_algorithm

---

innodb_fast_shutdown

• Description: The shutdown mode. If set to 1, the default, InnoDB performs a fast shutdown, not performing a full purge or an insert buffer merge. If set to 0, InnoDB performs a slow shutdown, including full purge and insert buffer merge. If set to 2, the logs are flushed and a cold shutdown takes place, similar to a crash. The resulting startup then performs crash recovery. Mode 0 can be very slow, even taking hours in extreme cases, but is necessary if upgrading to a new major release. Mode 2 is extremely fast, in cases of emergency, but risks corruption.
• Commandline: --innodb-fast-shutdown[=#]
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1
• Range: 0 to 2

---

innodb_fatal_semaphore_wait_threshold

• Description: Maximum number of seconds that semaphore times out in InnoDB.
• Commandline: --innodb-fatal-semaphore-wait-threshold=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 600
• Range: 1 to 4294967295
• Introduced: MariaDB 10.1.2

---

innodb_file_format

• Description: File format for new InnoDB tables. Can either be Antelope, the default and the original format, or Barracuda, which supports compression. Note that this value is also used when a table is re-created with an ALTER TABLE which requires a table copy. See XtraDB/InnoDB File Format for more on the file formats.
• Commandline: --innodb-file-format=value
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: Antelope (MariaDB/MySQL >= 5.5.7), Barracuda (MariaDB/MySQL 5.5.0 to 5.5.6)
• Valid Values: Antelope, Barracuda

---

innodb_file_format_check

• Description: If set to 1, the default, InnoDB checks the shared tablespace file format tag. If this is higher than the current version supported by XtraDB/InnoDB (for example Barracuda when only Antelope is supported), XtraDB/InnoDB will will not start. If it the value is not higher, XtraDB/InnoDB starts correctly and the innodb_file_format_max value is set to this value. If innodb_file_format_check is set to 0, no checking is performed. See XtraDB/InnoDB File Format for more on the file formats.
• Commandline: --innodb-file-format-check=#
• Scope: Global
• Dynamic: No
• Data Type: boolean (>= MariaDB/MySQL 5.5.5)
• Default Value: ON (>= MariaDB/MySQL 5.5.5)

---

innodb_file_format_max

• Description: The highest XtraDB/InnoDB file format. This is set to the value of the file format tag in the shared tablespace on startup (see innodb_file_format_check. If the server later creates a higher table format, innodb_file_format_max is set to that value. See XtraDB/InnoDB File Format for more on the file formats.
• Commandline: --innodb-file-format-max=value
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: Antelope
• Valid Values: Antelope, Barracuda
• Introduced: MariaDB/MySQL 5.5.5

---

innodb_file_per_table

• Description: If set to 1, new XtraDB/InnoDB tables are created with data and indexes stored in their own .ibd file. If set to 0, the default, new tables are created in the system tablespace. Compression is only available with per table storage. Note that this value is also used when a table is re-created with an ALTER TABLE which requires a table copy.
• Commandline: --innodb-file-per-table
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF (>= MariaDB/MySQL 5.5.7), ON (MariaDB/MySQL 5.5.0 to 5.5.6)

---

innodb_flush_log_at_timeout

• Description: Interval in seconds to write and flush the logs. Before MariaDB 10, this was fixed at one second, which is still the default, but this can now be changed. It's usually increased to reduce flushing and avoid impacting performance of binary log group commit.
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1
• Range: 0 to 2700
• Introduced: MariaDB/MySQL 5.6

---

innodb_flush_log_at_trx_commit

• Description: Set to 1, along with sync_binlog=1 for the greatest level of fault tolerance. The value of innodb_use_global_flush_log_at_trx_commit determines whether this variable can be reset with a SET statement or not.
  • 1 The default, the log buffer is written to the log file and a flush to disk performed after each transaction. This is required for full ACID compliance.
  • 0 Nothing is done on commit; rather the log buffer write and flush are performed once a second. This gives better performance, but a server crash can erase the last second of transactions.
  • 2 The log buffer is written after each commit, but flushing takes place once a second. Performance is slightly better, but a OS or power outage can cause the last second's transactions to be lost.
  • 3 (from MariaDB 10.0) Emulates MariaDB 5.5 group commit (3 syncs per group commit). See Binlog group commit and innodb_flush_log_at_trx_commit.
• Commandline: --innodb-flush-log-at-trx-commit[=#]
• Scope: Global
• Dynamic: Yes
• Data Type: enumeration
• Default Value: 1
• Valid Values: 0, 1, 2 or 3 (from MariaDB 10.0)

---

innodb_flush_method

• Description: XtraDB/InnoDB flushing method. Windows always uses async_unbuffered and this variable then has no effect. On Unix, by default fsync() is used to flush data and logs. Adjusting this variable can give performance improvements, but behavior differs widely on different filesystems, and changing from the default has caused problems in some situations, so test and benchmark carefully before adjusting.
  • O_DSYNC - O_DSYNC is used to open and flush logs, and fsync() to flush the data files.
  • O_DIRECT - O_DIRECT or directio(), is used to open data files, and fsync() to flush data and logs.
  • fdatasync - an old default value that follows the default behavior of using fsync(), but replaced with the unset default to avoid confusion between fdatasync() and fsync().
  • O_DIRECT_NO_FSYNC - introduced in MariaDB 10.0 / MySQL 5.6.7. Uses O_DIRECT during flushing I/O, but skips fsync() afterwards. Not suitable for XFS filesystems.
  • ALL_O_DIRECT - introduced in MariaDB 10.0 / Percona 5.6, and available with XtraDB only. Uses O_DIRECT for opening both data and logs and fsync() to flush data but not logs. Use with large InnoDB files only, otherwise may cause a performance degradation. Set innodb_log_block_size to 4096 on ext4 filesystems. This is the default log block size on ext4 and will avoid unaligned AIO/DIO warnings.
• Commandline: --innodb-flush-method=name
• Scope: Global
• Dynamic: No
• Data Type: enumeration
• Default Value: Not set.
• Valid Values: fdatasync, O_DSYNC, O_DIRECT, O_DIRECT_NO_FSYNC (MariaDB 10.0), ALL_O_DIRECT (MariaDB 10.0, XtraDB only)

---

innodb_flush_neighbor_pages

• Description: Determines whether, when dirty pages are flushed to the data file, neighboring pages in the data file are flushed at the same time. If set to none, the feature is disabled. If set to area, the default, the standard InnoDB behavior is used. For each page to be flushed, dirty neighboring pages are flushed too. If there's little head seek delay, such as SSD or large enough write buffer, one of the other two options may be more efficient. If set to cont, for each page to be flushed, neighboring contiguous blocks are flushed at the same time. Being contiguous, a sequential I/O is used, unlike the random I/O used in area. Replaced by innodb_flush_neighbors in MariaDB 10.0/XtraDB 5.6.
• Commandline: innodb-flush-neighbor-pages=value
• Scope: Global
• Dynamic: Yes
• Data Type: enumeration
• Default Value: area
• Valid Values: none or 0, area or 1, cont or 2
• Removed: MariaDB 10.0/XtraDB 5.6 - replaced by innodb_flush_neighbors

---

innodb_flush_neighbors

• Description: Determines whether flushing a page from the buffer pool will flush other dirty pages in the same group of pages (extent). In high write environments, if flushing is not aggressive enough, it can fall behind resulting in higher memory usage, or if flushing is too aggressive, cause excess I/O activity. SSD devices, with low seek times, would be less likely to require dirty neighbor flushing to be set.
  • 1: The default, flushes contiguous dirty pages in the same extent from the buffer pool.
  • 0: No other dirty pages are flushed.
  • 2: Flushes dirty pages in the same extent from the buffer pool.
• Commandline: --innodb-flush-neighbors=#
• Scope: Global
• Dynamic: Yes
• Data Type: enumeration
• Default Value: 1
• Valid Values: 0, 1, 2
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_flushing_avg_loops

• Description: Determines how quickly adaptive flushing will respond to changing workloads. The value is the number of iterations that a previously calculated flushing state snapshot is kept. Increasing the value smooths and slows the rate that the flushing operations change, while decreasing it causes flushing activity to spike quickly in response to workload changes.
• Commandline: --innodb-flushing-avg-loops=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 30
• Range: 1 to 1000
• Introduced: MariaDB/MySQL 5.6

---

innodb_force_load_corrupted

• Description: Set to 0 by default, if set to 1, XtraDB/InnoDB will be permitted to load tables marked as corrupt. Only use this to recover data you can't recover any other way, or in troubleshooting. Always restore to 0 when the returning to regular use.
• Commandline: --innodb-force-load-corrupted
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB/MySQL 5.5.18

---

innodb_force_primary_key

• Description: If set to 1 (0 is default) CREATE TABLEs without a primary or unique key where all keyparts are NOT NULL will not be accepted, and will return an error.
• Commandline: --innodb-force-primary-key
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.1.0

---

innodb_force_recovery

• Description: XtraDB/InnoDB crash recovery mode. 0 is the default. The other modes are for recovery purposes only, and no data can be changed while another mode is active. Some queries relying on indexes are also blocked. See XtraDB/InnoDB Recovery Modes for more on mode specifics.
• Commandline: --innodb-force-recovery=#
• Scope: Global
• Dynamic: No
• Data Type: enumeration
• Default Value: 0
• Range: 0 to 6

---

innodb_foreground_preflush

• Description: Before XtraDB 5.6.13-61.0, if the checkpoint age is in the sync preflush zone while a thread is writing to log, it will try to advance the checkpoint by issuing a flush list flush batch if this is not already being done. XtraDB has enhanced page cleaner tuning, and may already be performing furious flushing, resulting in the flush simply adding unneeded mutex pressure. Instead, the thread now waits for the flushes to finish, and then has two options, controlled by this variable.
  • exponential_backoff - thread sleeps while it waits for the flush list flush to occur. The sleep time randomly progressively increases, periodically reset to avoid runaway sleeps.
  • sync_preflush - thread issues a flush list batch, and waits for it to complete. This is the same as is used when the page cleaner thread is not running.
• Commandline: innodb-foreground-preflush=value
• Scope: Global
• Dynamic: Yes
• Data Type: enum
• Default Value: exponential_backoff
• Valid Values: exponential_backoff, sync_preflush
• Introduced: MariaDB 10.0.9 / XtraDB 5.6.13-61.0

---

innodb_ft_aux_table

• Description: Diagnostic variable intended only to be set at runtime. It specifies the qualified name (for example test/ft_innodb) of an InnoDB table that has a FULLTEXT index, and after being set the INFORMATION_SCHEMA tables INNODB_FT_INDEX_TABLE, INNODB_FT_INDEX_CACHE, INNODB_FT_CONFIG, INNODB_FT_DELETED, and INNODB_FT_BEING_DELETED will contain search index information for the specified table.
• Commandline: --innodb-ft-aux-table=value
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_ft_cache_size

• Description: Cache size available for a parsed document while creating an InnoDB FULLTEXT index.
• Commandline: --innodb-ft-cache-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 8000000
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_ft_enable_diag_print

• Description: If set to 1, additional full-text search diagnostic output is enabled.
• Commandline: --innodb-ft-enable-diag-print=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_ft_enable_stopword

• Description: If set to 1, the default, a set of stopwords is associated with an InnoDB FULLTEXT index when it is created. The stopword list comes from the table set by the session variable innodb_ft_user_stopword_table, if set, otherwise the global variable innodb_ft_server_stopword_table, if that is set, or the built-in list if neither variable is set.
• Commandline: --innodb-ft-enable-stopword=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: ON
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_ft_max_token_size

• Description: Maximum length of words stored in an InnoDB FULLTEXT index. A larger limit will increase the size of the index, slowing down queries, but permit longer words to be searched for. In most normal situations, longer words are unlikely search terms.
• Commandline: --innodb-ft-max-token-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 84
• Range: 10 to 252
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_ft_min_token_size

• Description: Minimum length of words stored in an InnoDB FULLTEXT index. A smaller limit will increase the size of the index, slowing down queries, but permit shorter words to be searched for. For data stored in a Chinese, Japanese or Korean character set, a value of 1 should be specified to preserve functionality.
• Commandline: --innodb-ft-min-token-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 3
• Range: 0 to 16
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_ft_num_word_optimize

• Description: Number of words processed during each OPTIMIZE TABLE on an InnoDB FULLTEXT index. To ensure all changes are incorporated, multiple OPTIMIZE TABLE statements could be run in case of a substantial change to the index.
• Commandline: --innodb-ft-num-word-optimize=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 2000
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_ft_result_cache_limit

• Description: Limit in bytes of the InnoDB FULLTEXT index query result cache per fulltext query. The latter stages of the full-text search are handled in memory, and limiting this prevents excess memory usage. If the limit is exceeded, the query returns an error.
• Commandline: --innodb-ft-result-cache-limit=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 2000000000
• Range: 10000 to 18446744073709551615
• Introduced: MariaDB 10.0.9/MySQL 5.6.13

---

innodb_ft_server_stopword_table

• Description: Table name containing a list of stopwords to ignore when creating an InnoDB FULLTEXT index, in the format db_name/table_name. The specified table must exist before this option is set, and must be an InnoDB table with a single column, a VARCHAR named VALUE. See also xtradbinnodb-server-system-variables#innodb_ft_enable_stopword
• Commandline: --innodb-ft-server-stopword-table=db_name/table_name
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: Empty
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_ft_sort_pll_degree

• Description: Number of parallel threads used when building an InnoDB FULLTEXT index. See also innodb_sort_buffer_size.
• Commandline: --innodb-ft-sort-pll-degree=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 2
• Range: 1 to 32
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_ft_total_cache_size

• Description:Total memory allocated for the cache for all InnoDB FULLTEXT index tables. A force sync is triggered if this limit is exceeded.
• Commandline: --innodb-ft-total-cache-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 640000000
• Range: 32000000 to 1600000000
• Introduced: MariaDB 10.0.9/MySQL 5.6.13

---

innodb_ft_user_stopword_table

• Description: Table name containing a list of stopwords to ignore when creating an InnoDB FULLTEXT index, in the format db_name/table_name. The specified table must exist before this option is set, and must be an InnoDB table with a single column, a VARCHAR named VALUE.
• Commandline: --innodb-ft-user-stopword-table=db_name/table_name
• Scope: Session
• Dynamic: Yes
• Data Type: string
• Default Value: Empty
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_ibuf_accel_rate

• Description: Allows the insert buffer activity to be adjusted. The following formula is used: [real activity] = [default activity] * (innodb_io_capacity/100) * (innodb_ibuf_accel_rate/100). As innodb_ibuf_accel_rate is increased from its default value of 100, the lowest setting, insert buffer activity is increased. See also innodb_io_capacity. This Percona XtraDB variable has not been ported to XtraDB 5.6.
• Commandline: innodb-ibuf-accel-rate=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 100
• Range: 100 to 999999999
• Introduced: XtraDB 5.5.8-20.0
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_ibuf_active_contract

• Description: Specifies whether the insert buffer can be processed before it's full. If set to 0, the standard InnoDB method is used, and the buffer is not processed until it's full. If set to 1, the default, the insert buffer can be processed before it is full. This Percona XtraDB variable has not been ported to XtraDB 5.6.
• Commandline: innodb-ibuf-active-contract=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1
• Range: 0 to 1
• Introduced: XtraDB 5.5.8-20.0
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_ibuf_max_size

• Description: Maximum size in bytes of the insert buffer. Defaults to half the size of the buffer pool so you may want to reduce if you have a very large buffer pool. If set to 0, the insert buffer is disabled, which will cause all secondary index updates to be performed synchronously, usually at a cost to performance. This Percona XtraDB variable has not been ported to XtraDB 5.6.
• Commandline: innodb-ibuf-max-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 1/2 the size of the InnoDB buffer pool
• Range: 0 to 1/2 the size of the InnoDB buffer pool
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_idle_flush_pct

• Description: Up to what percentage of dirty pages should be flushed when innodb finds it has spare resources to do so.
• Commandline: --innodb-idle-flush-pct=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 100
• Range: 0 to 100
• Introduced: MariaDB 10.1.2

---

innodb_immediate_scrub_data_uncompressed

• Description: Enable scrubbing of data. See Data Scrubbing.
• Commandline: --innodb-immediate-scrub-data-uncompressed=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.1.3

---

innodb_import_table_from_xtrabackup

• Description: If set to 1, permits importing of .ibd files exported with the XtraBackup --export option. Previously named innodb_expand_import. Removed in MariaDB 10.0/XtraDB 5.6 and replaced with MySQL 5.6's transportable tablespaces.
• Commandline: innodb-import-table-from-xtrabackup=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 to 1
• Introduced: XtraDB 5.5.10-20.1
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_instrument_semaphores

• Description: Enable semaphore request instrumentation. This could have some effect on performance but allows better information on long semaphore wait problems.
• Commandline: --innodb-instrument-semaphores={0|1}
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.1.3

---

innodb_io_capacity

• Description: Limit on I/O activity for XtraDB/InnoDB background tasks, including merging data from the insert buffer and flushing pages. Should be set to around the number of I/O operations per second that system can handle, based on the type of drive/s being used. You can also set it higher when the server starts to help with the extra workload at that time, and then reduce for normal use. Ideally, opt for a lower setting, as at higher value data is removed from the buffers too quickly, reducing the effectiveness of caching.
• Commandline: --innodb-io-capacity=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 200
• Range: 100 to 18446744073709551615 (2⁶⁴-1)

---

innodb_io_capacity_max

• Description: Upper limit to which InnodDB can extend innodb_io_capacity in case of emergency. Only applicable if no value was specified for innodb_io_capacity when the server started up.
• Commandline: --innodb-io-capacity-max=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 200
• Range - 32 bit: 2000 to 4294967295 (2³²-1 or 4096MB)
• Range - 64 bit: 2000 to 18446744073709551615 (2⁶⁴-1)
• Introduced: MariaDB 10.0 / MySQL 5.6.6

---

innodb_kill_idle_transaction

• Description: Time in seconds before killing an idle XtraDB transaction. If set to 0 (the default), the feature is disabled. Used to prevent accidental user locks.
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: to
• Introduced: MariaDB 5.5 / XtraDB 5.5.16-22.0

---

innodb_large_prefix

• Description: If set to 1, tables that use dynamic and compressed row formats (which require innodb_file_format to be barracuda and innodb_file_per_table to be true) are permitted to have index key prefixes up to 3072 bytes.
• Commandline: --innodb-large-prefix
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB/MySQL 5.5.14

---

innodb_lazy_drop_table

• Description: Deprecated and removed in XtraDB 5.6. DROP TABLE processing can take a long time when innodb_file_per_table is set to 1 and there's a large buffer pool. If innodb_lazy_drop_table is set to 1 (0 is default), XtraDB attempts to optimize DROP TABLE processing by deferring the dropping of related pages from the buffer pool until there is time, only initially marking them.
• Commandline: innodb-lazy-drop-table={0|1}
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: 0
• Introduced: XtraDB 5.5.10-20.1
• Deprecated: XtraDB 5.5.30-30.2
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_lock_wait_timeout

• Description: Time in seconds that an InnoDB transaction waits for an InnoDB row lock (not table lock) before giving up with the error ERROR 1205 (HY000): Lock wait timeout exceeded; try restarting transaction. When this occurs, the statement (not transaction) is rolled back. The whole transaction can be rolled back if the innodb_rollback_on_timeout option is used. Increase this for data warehousing applications or where other long-running operations are common, or decrease for OLTP and other highly interactive applications. This setting does not apply to deadlocks, which InnoDB detects immediately, rolling back a deadlocked transaction.
• Commandline: --innodb-lock-wait-timeout=#
• Scope: Global, Session
• Dynamic: Yes
• Data Type: numeric
• Default Value: 50
• Range: 1 to 1073741824

---

innodb_locking_fake_changes

• Description: If set to OFF, fake transactions (see innodb_fake_changes) don't take row locks. This is an experimental feature to attempt to deal with drawbacks in fake changes blocking real locks. It is not safe for use in all environments.
• Commandline: --innodb-locking-fake-changes
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: ON
• Introduced: MariaDB 5.5 / XtraDB 5.5.28-29.2

---

innodb_locks_unsafe_for_binlog

• Description: Set to 0 by default, in which case XtraDB/InnoDB uses gap locking. If set to 1, gap locking is disabled for searches and index scans.
• Commandline: --innodb-locks-unsafe-for-binlog
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF

---

innodb_log_arch_dir

• Description: The directory for XtraDB log archiving.
• Commandline: --innodb-log-arch-dir=name
• Scope: Global
• Dynamic: No
• Data Type: string
• Default Value: ./
• Introduced: MariaDB 10.0.9 / XtraDB 5.6.11-60.3

---

innodb_log_arch_expire_sec

• Description: Time in seconds since the last change after which the archive log should be deleted.
• Commandline: --innodb-log-arch-expire-sec=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Introduced: MariaDB 10.0.9 / XtraDB 5.6.11-60.3

---

innodb_log_archive

• Description: Whether or not XtraDB log archiving is enabled.
• Commandline: --innodb-log-archive=value
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0.9 / XtraDB 5.6.11-60.3

---

innodb_log_block_size

• Description: Size in bytes of the transaction log records. Generally 512, the default, or 4096, are the only two useful values. If the server is restarted and this value is changed, all old log files need to be removed. Should be set to 4096 for SSD cards or if innodb_flush_method is set to ALL_O_DIRECT on ext4 filesystems.
• Commandline: innodb-log-block-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 512
• Introduced: XtraDB 5.1.53-12.4

---

innodb_log_buffer_size

• Description: Size in bytes of the buffer for writing XtraDB/InnoDB log files to disk. Increasing this means larger transactions can run without needing to perform disk I/O before committing.
• Commandline: --innodb-log-buffer-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 8388608 (8MB)
• Range: 262144 to 4294967295 (256KB to 4096MB)

---

innodb_log_checksum_algorithm

• Description: Experimental feature (as of MariaDB 10.0.9), this variable specifies how to generate and verify log checksums.
  • none - No checksum. A constant value is instead written to logs, and no checksum validation is performed.
  • innodb - The default, and the original InnoDB algorithm. This is inefficient, but compatible with all MySQL, MariaDB and Percona versions that don't support other checksum algorithms.
  • crc32 - CRC32 is used for log block checksums, which also permits recent CPU's to use hardware acceleration for the checksums.
  • strict_* - Whether or not to accept checksums from other algorithms. If strict mode is used, checksums blocks will be considered corrupt if they don't match the specified algorithm. Normally they are considered corrupt only if no other algorithm matches.
• Commandline: innodb-log-checksum-algorithm=value
• Scope: Global
• Dynamic: No
• Data Type: enum
• Default Value: innodb
• Valid Values: innodb, none, crc32, strict_none, strict_innodb, strict_crc32

---

innodb_log_compressed_pages

• Description: Whether or not images of recompressed pages are stored in the InnoDB redo logs.
• Commandline: --innodb-log-compressed-pages=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF (from MariaDB 10.1.2), ON (before MariaDB 10.1.2)
• Introduced: MariaDB 10.0.9 / MySQL 5.6.11

---

innodb_log_file_size

• Description: Size in bytes of each log file in the log group. The combined size can be no more than 4GB. Larger values mean less disk I/O due to less flushing checkpoint activity, but also slower recovery from a crash.
• Commandline: --innodb-log-file-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 50331648 (48MB) (from MariaDB 10.0), 5242880 (5MB) (before MariaDB 10.0)
• Range: 108576 to 4294967295 (106KB to 4096MB)

---

innodb_log_files_in_group

• Description: Number of log log files in the log group.
• Commandline: --innodb-log-files-in-group=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 2
• Range: 2 to 100

---

innodb_log_group_home_dir

• Description: Path to the XtraDB/InnoDB redo log files. If none is specified, files named ib_logfile0 and ib_logfile1, with a size of innodb_log_file_size are created in the data directory.
• Commandline: --innodb-log-group-home-dir=path
• Scope: Global
• Dynamic: No
• Data Type: directory name

---

innodb_lru_scan_depth

• Description: Specifies how far down the buffer pool LRU list the cleaning thread should look for dirty pages to flush. This process is performed once a second. In an I/O intensive-workload, can be increased if there is spare I/O capacity, or decreased if in a write-intensive workload with little spare I/O capacity.
• Commandline: --innodb-lru-scan-depth=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1024
• Range - 32bit: 100 to 232-1
• Range - 64bit: 100 to 264-1
• Introduced: XtraDB 5.1.66-14.2

---

innodb_max_bitmap_file_size

• Description: Limit in bytes of the changed page bitmap files. For faster incremental backup with Xtrabackup, XtraDB tracks pages with changes written to them according to the redo log and writes the information to special changed page bitmap files. These files are rotated when the server restarts or when this limit is reached. See also innodb_track_changed_pages and innodb_max_changed_pages.
• Commandline: innodb-max-bitmap-file-size=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 4096 (4KB)
• Range: 4096 (4KB) to 18446744073709551615 (16EB)
• Introduced: XtraDB 5.1.66-14.2

---

innodb_max_changed_pages

• Description: Limit to the number of changed page bitmap files. See innodb_max_bitmap_file_size and innodb_track_changed_pages. Previously named innodb_changed_pages_limit
• Commandline: innodb-max-changed-pages=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1000000
• Range: 1 upwards
• Introduced: XtraDB 5.1.67-14.4

---

innodb_max_dirty_pages_pct

• Description: Maximum percentage of unwritten (dirty) pages in the buffer pool. This variable was changed to a double in MariaDB 10.0.15.
• Commandline: --innodb-max-dirty-pages-pct=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 75
• Range: 0 to 99.999 (from MariaDB 10.0.15), 0 to 99 (before MariaDB 10.0.15)

---

innodb_max_dirty_pages_pct_lwm

• Description: Low water mark percentage of dirty pages that will enable preflushing to lower the dirty page ratio. If set to 0, the default until MariaDB 10.0.15, preflushing is disabled. This variable was changed to a double in MariaDB 10.0.15.
• Commandline: --innodb-max-dirty-pages-pct-lwm=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0.001000 (from MariaDB 10.0.15), 0 (before MariaDB 10.0.15)
• Range: 0 to 99.999 (from MariaDB 10.0.15), 0 to 99 (before MariaDB 10.0.15)
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_max_purge_lag

• Description: When purge operations are lagging on a busy server, setting innodb_max_purge_lag can help. By default set to 0, no lag, the figure is used to calculate a time lag for each INSERT, UPDATE, and DELETE when the system is lagging. XtraDB/InnoDB keeps a list of transactions with delete-marked index records due to UPDATE and DELETE statements. The length of this list is purge_lag, and the calculation, performed every ten seconds, is as follows: ((purge_lag/innodb_max_purge_lag)×10)–5 milliseconds.
• Commandline: --innodb-max-purge-lag=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 to 4294967295

---

innodb_max_purge_lag_delay

• Description: Maximum delay in milliseconds imposed by the innodb_max_purge_lag setting. If set to 0, the default, there is no maximum.
• Commandline: --innodb-max-purge-lag-delay=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_merge_sort_block_size

• Description: Size in bytes of the block used for merge sorting in fast index creation. Replaced in MariaDB 10.0/XtraDB 5.6 by innodb_sort_buffer_size.
• Commandline: innodb-merge-sort-block-size=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1048576 (1M)
• Range: 1048576 (1M) to 1073741824 (1G)
• Introduced: XtraDB 5.5.27-28.0
• Removed: MariaDB 10.0/XtraDB 5.6 - replaced by innodb_sort_buffer_size

---

innodb_mirrored_log_groups

• Description: Unused

---

innodb_mtflush_threads

• Description: Number of multi-threaded flush threads. See Fusion-io Multi-threaded Flush.
• Commandline: --innodb-mtflush-threads=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 8
• Range: 1 to 64
• Introduced: MariaDB 10.1.0

---

innodb_monitor_disable

• Description: Disables the specified counters in the INFORMATION_SCHEMA.INNODB_METRICS table.
• Commandline: --innodb-monitor-disable=string
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Introduced: MariaDB 10.0.0

---

innodb_monitor_enable

• Description: Enables the specified counters in the INFORMATION_SCHEMA.INNODB_METRICS table.
• Commandline: --innodb-monitor-enable=string
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Introduced: MariaDB 10.0.0

---

innodb_monitor_reset

• Description: Resets the count value of the specified counters in the INFORMATION_SCHEMA.INNODB_METRICS table to zero.
• Commandline: --innodb-monitor-reset=string
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Introduced: MariaDB 10.0.0

---

innodb_monitor_reset_all

• Description: Resets all values for the specified counters in the INFORMATION_SCHEMA.INNODB_METRICS table.
• Commandline: ---innodb-monitor-reset-all=string
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Introduced: MariaDB 10.0.0

---

innodb_old_blocks_pct

• Description: Percentage of the buffer pool to use for the old block sublist.
• Commandline: --innodb-old-blocks-pct=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 37
• Range: 5 to 95

---

innodb_old_blocks_time

• Description: Time in milliseconds an inserted block must stay in the old sublist after its first access before it can be moved to the new sublist. '0' means "no delay". Setting a non-zero value can help prevent full table scans clogging the buffer pool. See also innodb_old_blocks_pct.
• Commandline: --innodb-old-blocks-time=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1000 (from MariaDB 10.0), 0 (before MariaDB 10.0)
• Range: 0 to 232-1

---

innodb_online_alter_log_max_size

• Description: The maximum size for temporary log files during online DDL (data and index structure changes). The temporary log file is used for each table being altered, or index being created, to store data changes to the table while the process is underway. The table is extended by innodb_sort_buffer_size up to the limit set by this variable. If this limit is exceeded, the online DDL operation fails and all uncommitted changes are rolled back. A lower value reduces the time a table could lock at the end of the operation to apply all the log's changes, but also increases the chance of the online DDL changes failing.
• Commandline: --innodb-online-alter-log-max-size=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 134217728
• Range: 65536 to 264-1
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_open_files

• Description: Maximum .ibd files MariaDB can have open at the same time. Only applies to systems with multiple XtraDB/InnoDB tablespaces, and is separate to the table cache and open_files_limit. In MariaDB 10.0 the default, if innodb_file_per_table is disabled, is 300 or the value of table_open_cache, whichever is higher. It will also auto-size up to the default value if it is set to a value less than 10.
• Commandline: --innodb-open-files=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: autosized (from MariaDB 10.0), 300 (before MariaDB 10.0)
• Range: 10 to 4294967295

---

innodb_optimize_fulltext_only

• Description: When set to 1 (0 is default), OPTIMIZE TABLE will only process InnoDB FULLTEXT index data. Only intended for use during fulltext index maintenance.
• Commandline: --innodb-optimize-fulltext-only=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_page_size

• Description: Size in bytes of the page size for all XtraDB/InnoDB tablespaces. The default, 16k, is suitable for most uses, but a smaller page size might work more effectively in a situation with many small writes (OLTP), or with SSD storage, which usually has smaller block sizes. The page size is set when a MariaDB instance starts, and it remains constant afterwards. MariaDB 10.1 allows up to 64K pages for tables with DYNAMIC, COMPACT and REDUNDANT row types, allowing more blob fields to be present in a table. Tables with COMPRESSED row type can for now still only be <= 16K page size. Single row size must be still <= 16K and max key length is not affected. Note that Percona previously implemented its own experimental version of innodb_page_size, which was deprecated in XtraDB 5.5.30-30.2, and replaced in XtraDB 5.6 with the MySQL 5.6 version.
• Commandline: --innodb-page-size=#
• Scope: Global
• Dynamic: No
• Data Type: enumeration
• Default Value: 16384
• Valid Values: 4k or 4096, 8k or 8192, 16k or 16384. MariaDB 10.1.0 also permits 32k and 64k.
• Introduced: XtraDB 5.5 and MySQL 5.6

---

innodb_pass_corrupt_table

• Removed: XtraDB 5.5 - renamed innodb_corrupt_table_action.

---

innodb_prefix_index_cluster_optimization

• Description: Enable prefix optimization to sometimes avoid cluster index lookups.
• Commandline: --innodb-prefix-index-cluster-optimization=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.1.2

---

innodb_print_all_deadlocks

• Description: If set to 1 (0 is default), all XtraDB/InnoDB transaction deadlock information is written to the error log.
• Commandline: --innodb-print-all-deadlocks=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB/MySQL 5.5.30

---

innodb_purge_batch_size

• Description: Units of redo log records that will trigger a purge operation. Together with innodb_purge_threads has a small effect on tuning.
• Commandline: --innodb-purge-batch-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 20
• Range: 1 to 5000
• Introduced: MariaDB/MySQL 5.5.4

---

innodb_purge_threads

• Description: Number of background threads dedicated to XtraDB purge operations. In MariaDB 10.0, the range is 1 (the default) to 32. At least one background thread is always used in MariaDB 10.0. Setting to a value greater than 1 creates that many separate purge threads. This can improve efficiency in some cases, such as when performing DML operations on many tables. In MariaDB 5.5, the options are 0 and 1. If set to 0, the default, purging is done with the master thread. If set to 1, purging is done on a separate thread, which could reduce contention. See also innodb_purge_batch_size.
• Commandline: --innodb-purge-threads=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 1 (>=MariaDB 10.0), 0 (MariaDB 5.5)
• Range: 1 to 32 (>=MariaDB 10.0), 0 to 1 (MariaDB 5.5)
• Introduced: MariaDB/MySQL 5.5.4

---

innodb_random_read_ahead

• Description: Originally, random read-ahead was always set as an optimization technique, but was removed in MariaDB/MySQL 5.5. innodb_random_read_ahead permits it to be re-instated if set to 1 (0) is default.
• Commandline: --innodb-random-read-ahead=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_read_ahead

• Description: If set to linear, the default, XtraDB/InnoDB will automatically fetch remaining pages if there are enough within the same extent that can be accessed sequentially. If set to none, read-ahead is disabled. random has been removed and is now ignored, while both sets to both linear and random. Also see innodb_read_ahead_threshold for more control on read-aheads. Removed in MariaDB 10.0/XtraDB 5.6 and replaced by MySQL 5.6's innodb_random_read_ahead.
• Commandline: innodb-read-ahead=value
• Scope: Global
• Dynamic: Yes
• Data Type: enumeration
• Default Value: linear
• Valid Values: none, random, linear, both
• Removed: MariaDB 10.0/XtraDB 5.6 - replaced by MySQL 5.6's innodb_random_read_ahead

---

innodb_read_ahead_threshold

• Description: Minimum number of pages XtraDB/InnoDB must read from an extent of 64 before initiating an asynchronous read for the following extent.
• Commandline: --innodb-read-ahead-threshold=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 56
• Range: 0 to 64

---

innodb_read_io_threads

• Description: Number of I/O threads for XtraDB/InnoDB reads. You may on rare occasions need to reduce this default on Linux systems running multiple MariaDB servers to avoid exceeding system limits.
• Commandline: --innodb-read-io-threads=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 4
• Range: 1 to 64

---

innodb_read_only

• Description: If set to 1 (0 is default), the server will be read-only. For use in distributed applications, data warehouses or read-only media.
• Commandline: --innodb-read-only=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_recovery_stats

• Description: If set to 1 (0 is default) and recovery is necessary on startup, the server will write detailed recovery statistics to the error log at the end of the recovery process. This Percona XtraDB variable has not been ported to XtraDB 5.6.
• Commandline: No
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_recovery_update_relay_log

• Description: If set to 1 (0 is default), the relay log info file will be overwritten on crash recovery if the information differs from the InnoDB record. Should not be used if multiple storage engine types are being replicated. Previously named innodb_overwrite_relay_log_info. Removed in MariaDB 10.0/XtraDB 5.6 and replaced by MySQL 5.6's relay-log-recovery
• Commandline: innodb-recovery-update-relay-log={0|1}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: XtraDB 5.5.10-20.1
• Removed: MariaDB 10.0/XtraDB 5.6 - replaced by MySQL 5.6's relay-log-recovery

---

innodb_replication_delay

• Description: Time in milliseconds for the slave server to delay the replication thread if innodb_thread_concurrency is reached.
• Commandline: --innodb-replication-delay=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 to 4294967295

---

innodb_rollback_on_timeout

• Description: InnoDB usually rolls back the last statement of a transaction that's been timed out (see innodb_lock_wait_timeout). If innodb_rollback_on_timeout is set to 1 (0 is default), InnoDB will roll back the entire transaction. Before MariaDB/MySQL 5.5, rolling back the entire transaction was the default behavior.
• Commandline: --innodb-rollback-on-timeout
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: 0

---

innodb_rollback_segments

• Description: Specifies the number of rollback segments that XtraDB/InnoDB will use within a transaction (see undo log). Replaced by innodb_undo_logs in MariaDB 10.0/MySQL 5.6.
• Commandline: --innodb-rollback-segments=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 128
• Range: 1 to 128
• Introduced: MariaDB/MySQL 5.5.11

---

innodb_scrub_log

• Description: Enable redo log scrubbing. See Data Scrubbing.
• Commandline: --innodb-scrub-log
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.1.3

---

innodb_scrub_log_interval

• Description: Used with Data Scrubbing in 10.1.3 only - replaced in 10.1.4 by innodb_scrub_log_speed. Innodb redo log scrubbing interval in milliseconds.
• Commandline: --innodb-scrub-log-interval=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 56
• Range: 0 to 50000
• Introduced: MariaDB 10.1.3
• Removed: MariaDB 10.1.4

---

innodb_scrub_log_speed

• Description: Innodb redo log scrubbing speed in bytes/sec. See Data Scrubbing.
• Commandline: --innodb-scrub-log-speed=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 256
• Range: 1 to 50000
• Introduced: MariaDB 10.1.4

---

innodb_sched_priority_cleaner

• Description: Set a thread scheduling priority for cleaner and LRU manager threads. The range from 0 to 39 corresponds in reverse order to Linux nice values of -20 to 19. So 0 is the lowest priority (Linux nice value 19) and 39 is the highest priority (Linux nice value -20).
• Commandline: innodb-sched-priority-cleaner=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 19
• Range: 0 to 39
• Introduced: MariaDB 10.0.9 / XtraDB 5.6.13-61.0

---

innodb_show_locks_held

• Description: Specifies the number of locks held for each InnoDB transaction to be displayed in SHOW ENGINE INNODB STATUS output.
• Commandline: innodb-show-locks-held=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 10
• Range: 0 to 1000
• Introduced: MariaDB 5.5 / XtraDB 5.5.8-20.0

---

innodb_show_verbose_locks

• Description: If set to 1, the traditional InnoDB behavior is followed and locked records will be shown in SHOW INNODB STATUS output. If set to 0, the default, only high-level information about the lock is shown.
• Commandline: innodb-show-verbose-locks=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 to 1
• Introduced: MariaDB 5.5 / XtraDB 5.5.8-20.0

---

innodb_simulate_comp_failures

• Description: Simulate compression failures. Used for testing robustness against random compression failures.
• Commandline: None
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 to 99
• Introduced: MariaDB 10.0.14

---

innodb_sort_buffer_size

• Description: Size of the sort buffers used for sorting data when an InnoDB index is created, as well as the amount by which the temporary log file is extended during online DDL operations to record concurrent writes. Before MariaDB 10.0/MySQL 5.6, this was not configurable and the current default setting of 1MB was fixed. The larger the setting, the fewer merge phases are required between buffers while sorting. When a CREATE TABLE or ALTER TABLE creates a new index, three buffers of this size are allocated, as well as pointers for the rows in the buffer.
• Commandline: --innodb-sort-buffer-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 1048576 (1M)
• Range: 65536 to 67108864
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_spin_wait_delay

• Description: Maximum delay (not strictly corresponding to a time unit) between spin lock polls.
• Commandline: --innodb-spin-wait-delay=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 6
• Range: 0 to 4294967295

---

innodb_stats_auto_recalc

• Description: If set to 1 (the default), persistent statistics are automatically recalculated when the table changes significantly (more than 10% of the rows). Affects tables created or altered with STATS_PERSISTENT=1 (see CREATE TABLE), or when innodb_stats_persistent is enabled. innodb_stats_persistent_sample_pages determines how much data to sample when recalculating.
• Commandline: --innodb-stats-auto-recalc=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: ON
• Introduced: MariaDB 10.0/XtraDB 5.6

---

innodb_stats_auto_update

• Description: If set to 0 (1 is default), index statistics will not be automatically calculated except when an ANALYZE TABLE is run, or the table is first opened. Replaced by innodb_stats_auto_recalc in MariaDB 10.0/XtraDB 5.6.
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: 1
• Introduced: XtraDB 5.5.8-20.0
• Removed: XtraDB 5.6 - replaced by innodb_stats_auto_recalc.

---

innodb_stats_method

• Description: Determines how NULLs are treated for XtraDB/InnoDB index statistics purposes. If set to nulls_equal, the default, all NULL index values are treated as a single group. This is usually fine, but if you have large numbers of NULLs the average group size is slanted higher, and the optimizer may miss using the index for ref accesses when it would be useful. If set to nulls_unequal, the opposite approach is taken, with each NULL forming its own group of one. Conversely, the average group size is slanted lower, and the optimizer may use the index for ref accesses when not suitable. Setting to nulls_ignored ignores NULLs altogether from index group calculations. See also Index Statistics, aria_stats_method and myisam_stats_method.
• Commandline: --innodb-stats-method=name
• Scope: Global
• Dynamic: Yes
• Data Type: enumeration
• Default Value: nulls_equal
• Valid Values: nulls_equal, nulls_unequal, nulls_ignored
• Introduced: MariaDB/MySQL 5.5.10

---

innodb_stats_modified_counter

• Description: The number of rows modified before we calculate new statistics. If set to 0, the default, current limits are used.
• Commandline: --innodb-stats-modified-counter=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 to 18446744073709551615
• Introduced: MariaDB 10.0.15

---

innodb_stats_on_metadata

• Description: If set to 1, the default, XtraDB/InnoDB updates statistics when accessing the INFORMATION_SCHEMA.TABLES or INFORMATION_SCHEMA.STATISTICS tables, and when running metadata statements such as SHOW INDEX or SHOW TABLE STATUS. If set to 0, statistics are not updated at those times, which can reduce the access time for large schemas, as well as make execution plans more stable.
• Commandline: --innodb-stats-on-metadata
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF (from MariaDB 10.0), ON (before MariaDB 10.0)
• Introduced: MariaDB/MySQL 5.5.4

---

innodb_stats_persistent

• Description: ANALYZE TABLE produces index statistics, and this setting determines whether they will be stored on disk, or be required to be recalculated more frequently, such as when the server restarts. This information is stored for each table, and can be set with the STATS_PERSISTENT clause when creating or altering tables (see CREATE TABLE).
• Commandline: --innodb-stats-persistent=setting
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: ON
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_stats_persistent_sample_pages

• Description: Number of index pages sampled when estimating cardinality and statistics for indexed columns. Increasing this value will increases index statistics accuracy, but use more I/O resources when running ANALYZE TABLE.
• Commandline: --innodb-stats-persistent-sample-pages=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 20
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_stats_sample_pages

• Description: Gives control over the index distribution statistics by determining the number of index pages to sample. Higher values produce more disk I/O, but, especially for large tables, produce more accurate statistics and therefore make more effective use of the query optimizer. Lower values than the default are not recommended, as the statistics can be quite inaccurate. Enabling innodb_stats_traditional will help large tables by using more samples. Deprecated in MariaDB 10.0 - use innodb_stats_transient_sample_pages instead.
• Commandline: --innodb-stats-sample-pages=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 8
• Range: 1 to 264-1
• Deprecated: MariaDB 10.0

---

innodb_stats_traditional

• Description: When enabled, the innodb_stats_sample_pages (MariaDB 5.5) or innodb_stats_transient_sample_pages (MariaDB 10) is multiplied by log2(pages in table) to give a larger sample of pages for larger tables for the purposes of index statistics calculation.
• Commandline: --innodb-stats-traditional=#
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 5.5.41/MariaDB 10.0.16

---

innodb_stats_transient_sample_pages

• Description: Gives control over the index distribution statistics by determining the number of index pages to sample. Higher values produce more disk I/O, but, especially for large tables, produce more accurate statistics and therefore make more effective use of the query optimizer. Lower values than the default are not recommended, as the statistics can be quite inaccurate. Enabling innodb_stats_traditional will help large tables by using more samples. If persistent statistics are used on a table (see innodb_stats_persistent), the setting from innodb_stats_persistent_sample_pages) applies instead.
• Commandline: --innodb-stats-transient-sample-pages=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 8
• Range: 1 to 264-1
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_stats_update_need_lock

• Description: Setting to 0 (1 is default) may help reduce contention of the &dict_operation_lock, but also disables the Data_free option in SHOW TABLE STATUS. This Percona XtraDB variable has not been ported to XtraDB 5.6.
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: 1
• Introduced: XtraDB 5.5.8-20.0
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_status_output

• Description: Enable InnoDB monitor output to the error log.
• Commandline: --innodb-status-output={0|1}
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0.14

---

innodb_status_output_locks

• Description: Enable InnoDB lock monitor output to the error log. Requires innodb_status_output=ON.
• Commandline: --innodb-status-output-locks={0|1}
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.0.14

---

innodb_strict_mode

• Description: If set to 1 (0 is the default), XtraDB/InnoDB will return errors instead of warnings in certain cases, similar to strict SQL mode.
• Commandline: --innodb-strict-mode=#
• Scope: Global, Session
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF

---

innodb_support_xa

• Description: If set to 1, the default, XA transactions are supported. XA support ensures data is written to the binary log in the same order to the actual database, which is critical for replication and disaster recovery, but comes at a small performance cost. If your database is set up to only permit one thread to change data (for example, on a replication slave with only the replication thread writing), it is safe to turn this option off.
• Commandline: --innodb-support-xa
• Scope: Global, Session
• Dynamic: Yes
• Data Type: boolean
• Default Value: ON

---

innodb_sync_array_size

• Description: By default 1, can be increased to split internal thread co-ordinating, giving higher concurrency when there are many waiting threads.
• Commandline: --innodb-sync-array-size=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 1
• Range: 1 to 1024
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_sync_spin_loops

• Description: The number of times a thread waits for an XtraDB/InnoDB mutex to be freed before the thread is suspended.
• Commandline: --innodb-sync-spin-loops=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 30
• Range: 0 to 4294967295

---

innodb_table_locks

• Description: If autocommit is set to to 0 (1 is default), setting innodb_table_locks to 1, the default, will cause XtraDB/InnoDB to lock a table internally upon a LOCK TABLE.
• Commandline: --innodb-table-locks
• Scope: Global, Session
• Dynamic: Yes
• Data Type: boolean
• Default Value: ON

---

innodb_thread_concurrency

• Description: Once this number of threads is reached (excluding threads waiting for locks), XtraDB/InnoDB will place new threads in a wait state in a first-in, first-out queue for execution, in order to limit the number of threads running concurrently. A setting of 0, the default, permits as many threads as necessary. A suggested setting is twice the number of CPU's plus the number of disks.
• Commandline: --innodb-thread-concurrency=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 0
• Range: 0 to 1000

---

innodb_thread_concurrency_timer_based

• Description: If set to 1, thread concurrency will be handled in a lock-free timer-based manner rather than the default mutex-based method. Depends on atomic op builtins being available. This Percona XtraDB variable has not been ported to XtraDB 5.6.
• Commandline: innodb-thread-concurrency-timer-based={0|1}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_thread_sleep_delay

• Description: Time in microseconds that XtraDB/InnoDB threads sleep before joining the queue. Setting to 0 disables sleep.
• Commandline: --innodb_thread_sleep_delay=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 10000

---

innodb_track_changed_pages

• Description: For faster incremental backup with Xtrabackup, XtraDB tracks pages with changes written to them according to the redo log and writes the information to special changed page bitmap files. This read-only variable is used for controlling this feature. See also innodb_max_changed_pages and innodb_max_bitmap_file_size.
• Commandline: innodb-track-changed-pages={0|1}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: XtraDB 5.1.65-14.0

---

innodb_undo_directory

• Description: Path to the directory (relative or absolute) that InnoDB uses to create separate tablespaces for the undo logs. The default value leaves the undo logs in the same directory as the other log files. Use together with innodb_undo_logs and innodb_undo_tablespaces. Undo logs are most usefully placed on a separate storage device.
• Commandline: --innodb-undo-directory=name
• Scope: Global
• Dynamic: No
• Data Type: string
• Default Value: .
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_undo_logs

• Description: Specifies the number of rollback segments that XtraDB/InnoDB will use within a transaction (or the number of active undo logs). By default set to the maximum, 128, it can be reduced to avoid allocating unneeded rollback segments. See the Innodb_available_undo_logs status variable for the number of undo logs available. See also innodb_undo_directory and innodb_undo_tablespaces. Replaces innodb_rollback_segments in MariaDB 10.0/MySQL 5.6.
• Commandline: --innodb-undo-logs=#
• Scope: Global
• Dynamic: Yes
• Data Type: umeric
• Default Value: 128
• Range: 0 to 128
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_undo_tablespaces

• Description: Number of tablespaces files used for dividing up the undo logs. By default, undo logs are all part of the system tablspace, which contains one undo tablespace more than the innodb_undo_tablespaces setting. When the undo logs can grow large, splitting them over multiple tablespaces will reduce the size of any single tablespace. Must be set before InnoDB is initialized, or else MariaDB will fail to start, with an error saying that InnoDB did not find the expected number of undo tablespaces. The files are created in the directory specified by innodb_undo_directory, and are named undoN, N being an integer. The default size of an undo tablespace is 10MB. innodb_undo_logs must have a non-zero setting for innodb_undo_tablespaces to take effect.
• Commandline: --innodb-undo-tablespaces=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 0
• Range: 0 to 126
• Introduced: MariaDB 10.0/MySQL 5.6

---

innodb_use_atomic_writes

• Description: Implement atomic writes on FusionIO devices. See FusionIO DirectFS atomic write support for other variables affected when this is set.
• Commandline: innodb-use-atomic-writes={0|1}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 5.5.31 / XtraDB 5.5.31

---

innodb_use_fallocate

• Description: Preallocate files fast, using operating system functionality. On POSIX systems, posix_fallocate system call is used. Automatically set to 1 when innodb_use_atomic_writes is set - see FusionIO DirectFS atomic write support.
• Commandline: innodb-use-fallocate={0|1}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 5.5.31

---

innodb_use_global_flush_log_at_trx_commit

• Description: Determines whether a user can set the variable innodb_flush_log_at_trx_commit. If set to 1, a user cannot reset the value with a SET command, while if set to 1, a user can reset the value of innodb_flush_log_at_trx_commit.
• Commandline: innodb-use-global-flush-log-at-trx_commit={0|1}
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: ON
• Introduced: MariaDB 5.5 / XtraDB 5.5.8-20.0

---

innodb_use_mtflush

• Description: Whether to enable multi-threaded flush. See Fusion-io Multi-threaded Flush.
• Commandline: --innodb-use-mtflush=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.1.0

---

innodb_use_native_aio

• Description: For Linux systems only, specified whether to use Linux's asynchronous I/O subsystem. Set to 1 by default, it may be changed to 0 at startup if XtraDB/InnoDB detects a problem
• Commandline: --innodb-use-native-aio=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: ON
• Introduced: MariaDB/MySQL 5.5.4

---

innodb_use_purge_thread

• Description: Usually with InnoDB, data changed by a transaction is written to an undo space to permit read consistency, and freed when the transaction is complete. Many, or large, transactions, can cause the main tablespace to grow dramatically, reducing performance. This option, introduced in XtraDB 5.1 and removed for 5.5, allows multiple threads to perform the purging, resulting in slower, but much more stable performance.
• Commandline: --innodb-use-purge-thread=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 1
• Range: 0 to 32
• Introduced: XtraDB 5.1
• Removed: XtraDB 5.5

---

innodb_use_stacktrace

• Description: If set to ON (OFF is default), a signal handler for SIGUSR2 is installed when the InnoDB server starts. When a long semaphore wait is detected at sync/sync0array.c, a SIGUSR2 signal is sent to the waiting thread and thread that has acquired the RW-latch. For both threads a full stacktrace is produced as well as if possible.
• Commandline: --innodb-use-stacktrace=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 5.5.34

---

innodb_use_sys_malloc

• Description: If set the 1, the default, XtraDB/InnoDB will use the operating system's memory allocator. If set to 0 it will use its own.
• Commandline: --innodb-use-sys-malloc=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: ON

---

innodb_use_sys_stats_table

• Description: If set to 1 (0 is default), XtraDB will use the SYS_STATS system table for extra table index statistics. When a table is opened for the first time, statistics will then be loaded from SYS_STATS instead of sampling the index pages. Statistics are designed to be maintained only by running an ANALYZE TABLE. Replaced by MySQL 5.6's Persistent Optimizer Statistics.
• Commandline: innodb-use-sys-stats-table={0|1}
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: 0
• Introduced: XtraDB 5.5.8-20.0
• Removed: MariaDB 10.0/XtraDB 5.6

---

innodb_use_trim

• Description: Use trim to free up space of compressed blocks.
• Commandline: --innodb-use-trim=#
• Scope: Global
• Dynamic: No
• Data Type: boolean
• Default Value: OFF
• Introduced: MariaDB 10.1.0, MariaDB 10.0.15 Fusion-io

---

innodb_version

• Description: InnoDB version number.
• Scope: Global
• Dynamic: No
• Data Type: string

---

innodb_write_io_threads

• Description: Number of I/O threads for XtraDB/InnoDB writes. You may on rare occasions need to reduce this default on Linux systems running multiple MariaDB servers to avoid exceeding system limits.
• Commandline: --innodb-write-io-threads=#
• Scope: Global
• Dynamic: No
• Data Type: numeric
• Default Value: 4
• Range: 1 to 64

---