XA Transactions

Overview

The MariaDB XA implementation is based on the X/Open CAE document Distributed Transaction Processing: The XA Specification. This document is published by The Open Group and available at http://www.opengroup.org/public/pubs/catalog/c193.htm.

XA transactions are designed to allow distributed transactions, where a transaction manager (the application) controls a transaction which involves multiple resources. Such resources are usually DBMSs, but could be resources of any type. The whole set of required transactional operations is called a global transaction. Each subset of operations which involve a single resource is called a local transaction. XA used a 2-phases commit (2PC). With the first commit, the transaction manager tells each resource to prepare an effective commit, and waits for a confirm message. The changes are not still made effective at this point. If any of the resources encountered an error, the transaction manager will rollback the global transaction. If all resources communicate that the first commit is successful, the transaction manager can require a second commit, which makes the changes effective.

In MariaDB, XA transactions can only be used with storage engines that support them. At least InnoDB, TokuDB, SPIDER and MyRocks support them. For InnoDB, until MariaDB 10.2, XA transactions can be disabled by setting the innodb_support_xa server system variable to 0. From MariaDB 10.3, XA transactions are always supported.

Like regular transactions, XA transactions create metadata locks on accessed tables.

XA transactions require REPEATABLE READ as a minimum isolation level. However, distributed transactions should always use SERIALIZABLE.

Trying to start more than one XA transaction at the same time produces a 1400 error (SQLSTATE 'XAE09'). The same error is produced when attempting to start an XA transaction while a regular transaction is in effect. Trying to start a regular transaction while an XA transaction is in effect produces a 1399 error (SQLSTATE 'XAE07').

The statements that cause an implicit COMMIT for regular transactions produce a 1400 error (SQLSTATE 'XAE09') if a XA transaction is in effect.

Internal XA vs External XA

XA transactions are an overloaded term in MariaDB. If a storage engine is XA-capable, it can mean one or both of these:

• It supports MariaDB's internal two-phase commit API. This is transparent to the user. Sometimes this is called "internal XA", since MariaDB's internal transaction coordinator log can handle coordinating these transactions.

• It supports XA transactions, with the XA START, XA PREPARE, XA COMMIT, etc. statements. Sometimes this is called "external XA", since it requires the use of an external transaction coordinator to use this feature properly.

Transaction Coordinator Log

If you have two or more XA-capable storage engines enabled, then a transaction coordinator log must be available.

There are currently two implementations of the transaction coordinator log:

• Binary log-based transaction coordinator log
• Memory-mapped file-based transaction coordinator log

If the binary log is enabled on a server, then the server will use the binary log-based transaction coordinator log. Otherwise, it will use the memory-mapped file-based transaction coordinator log.

See Transaction Coordinator Log for more information.

Syntax

XA {START|BEGIN} xid [JOIN|RESUME]

XA END xid [SUSPEND [FOR MIGRATE]]

XA PREPARE xid

XA COMMIT xid [ONE PHASE]

XA ROLLBACK xid

XA RECOVER [FORMAT=['RAW'|'SQL']]

xid: gtrid [, bqual [, formatID ]]

The interface to XA transactions is a set of SQL statements starting with XA. Each statement changes a transaction's state, determining which actions it can perform. A transaction which does not exist is in the NON-EXISTING state.

When trying to execute an operation which is not allowed for the transaction's current state, an error is produced:

XA COMMIT 'test' ONE PHASE;
ERROR 1399 (XAE07): XAER_RMFAIL: The command cannot be executed when global transaction is in the  ACTIVE state

XA COMMIT 'test2';
ERROR 1399 (XAE07): XAER_RMFAIL: The command cannot be executed when global transaction is in the  NON-EXISTING state

XA START

XA {START|BEGIN} xid [JOIN|RESUME]

XA START (or BEGIN) starts a transaction and defines its xid (a transaction identifier). The JOIN or RESUME keywords have no effect. The new transaction will be in ACTIVE state.

The xid can have 3 components, though only the first one is mandatory. gtrid is a quoted string representing a global transaction identifier. bqual is a quoted string representing a local transaction identifier. formatID is an unsigned integer indicating the format used for the first two components; if not specified, defaults to 1. MariaDB does not interpret in any way these components, and only uses them to identify a transaction. xids of transactions in effect must be unique.

XA END

XA END xid [SUSPEND [FOR MIGRATE]]

XA END declares that the specified ACTIVE transaction is finished and it changes its state to IDLE. SUSPEND [FOR MIGRATE] has no effect.

XA PREPARE

XA PREPARE xid

XA PREPARE prepares an IDLE transaction for commit, changing its state to PREPARED. This is the first commit.

XA COMMIT

XA COMMIT xid [ONE PHASE]

XA COMMIT definitely commits and terminates a transaction which has already been PREPARED. If the ONE PHASE clause is specified, this statements performs a 1-phase commit on an IDLE transaction.

XA ROLLBACK

XA ROLLBACK xid

XA ROLLBACK rolls back and terminates an IDLE or PREPARED transaction.

XA RECOVER

XA RECOVER [FORMAT=['RAW'|'SQL']]

The XA RECOVER statement shows information about all transactions which are in the PREPARED state. It does not matter which connection created the transaction: if it has been PREPARED, it appears. But this does not mean that a connection can commit or rollback a transaction which was started by another connection. Note that transactions using a 1-phase commit are never in the PREPARED state, so they cannot be shown by XA RECOVER.

XA RECOVER produces four columns:

XA RECOVER;
+----------+--------------+--------------+------+
| formatID | gtrid_length | bqual_length | data |
+----------+--------------+--------------+------+
|        1 |            4 |            0 | test |
+----------+--------------+--------------+------+

You can use XA RECOVER FORMAT='SQL' to get the data in a human readable form that can be directly copy-pasted into XA COMMIT or XA ROLLBACK. This is particularly useful for binary xid generated by some transaction coordinators.

formatID is the formatID part of xid.

data are the gtrid and bqual parts of xid, concatenated.

gtrid_length and bqual_length are the lengths of gtrid and bqual, respectevely.

Examples

2-phases commit:

XA START 'test';

INSERT INTO t VALUES (1,2);

XA END 'test';

XA PREPARE 'test';

XA COMMIT 'test';

1-phase commit:

XA START 'test';

INSERT INTO t VALUES (1,2);

XA END 'test';

XA COMMIT 'test' ONE PHASE;

Human-readable:

xa start '12\r34\t67\v78', 'abc\ndef', 3;

insert t1 values (40);

xa end '12\r34\t67\v78', 'abc\ndef', 3;

xa prepare '12\r34\t67\v78', 'abc\ndef', 3;

xa recover format='RAW';
+----------+--------------+--------------+--------------------+
| formatID | gtrid_length | bqual_length | data               |
+----------+--------------+--------------+--------------------+
34      67v78abc       11 |            7 | 12
def |
+----------+--------------+--------------+--------------------+

xa recover format='SQL';
+----------+--------------+--------------+-----------------------------------------------+
| formatID | gtrid_length | bqual_length | data                                          |
+----------+--------------+--------------+-----------------------------------------------+
|        3 |           11 |            7 | X'31320d3334093637763738',X'6162630a646566',3 |
+----------+--------------+--------------+-----------------------------------------------+

xa rollback X'31320d3334093637763738',X'6162630a646566',3;

Known Issues

MariaDB Galera Cluster

MariaDB Galera Cluster does not support XA transactions.

However, MariaDB Galera Cluster builds include a built-in plugin called wsrep. Prior to MariaDB 10.4.3, this plugin was internally considered an XA-capable storage engine. Consequently, these MariaDB Galera Cluster builds have multiple XA-capable storage engines by default, even if the only "real" storage engine that supports external XA transactions enabled on these builds by default is InnoDB. Therefore, when using one these builds MariaDB would be forced to use a transaction coordinator log by default, which could have performance implications.

See Transaction Coordinator Log Overview: MariaDB Galera Cluster for more information.