Error Codes in 10.2 CS
When an operation fails, it generates an error. Each error has a numeric error code, an error name, and a message telling the user about what happened that triggered the error.
Can't create file '%s' (errno: %M)
Can't create table %s.%s (errno: %M)
Can't create database '%s' (errno: %M)
Can't create database '%s'; database exists
Can't drop database '%s'; database doesn't exist
Error dropping database (can't delete '%s', errno: %M)
Error dropping database (can't rmdir '%s', errno: %M)
Error on delete of '%s' (errno: %M)
Can't read record in system table
Can't get status of '%s' (errno: %M)
Can't get working directory (errno: %M)
Can't lock file (errno: %M)
Can't open file: '%s' (errno: %M)
Can't find file: '%s' (errno: %M)
Can't read dir of '%s' (errno: %M)
Can't change dir to '%s' (errno: %M)
Record has changed since last read in table '%s'
Disk full (%s); waiting for someone to free some space... (errno: %M)
Can't write; duplicate key in table '%s'
Error on close of '%s' (errno: %M)
Error reading file '%s' (errno: %M)
Error on rename of '%s' to '%s' (errno: %M)
Error writing file '%s' (errno: %M)
'%s' is locked against change
View '%s' doesn't exist for '%s'
Got error %M from storage engine %s
Storage engine %s of the table %s.%s doesn't have this option
Can't find record in '%s'
Incorrect information in file: '%s'
Index for table '%s' is corrupt; try to repair it
Old key file for table '%s'; repair it!
Table '%s' is read only
Out of memory; restart server and try again (needed %d bytes)
Out of sort memory, consider increasing server sort buffer size
Unexpected EOF found when reading file '%s' (errno: %M)
Too many connections
Out of memory; check if mysqld or some other process uses all available memory; if not, you may have to use 'ulimit' to allow mysqld to use more memory or you can add more swap space
Can't get hostname for your address
Access denied for user '%s' to database '%s'
Access denied for user '%s' (using password: %s)
No database selected
Column '%s' cannot be null
Unknown database '%s'
Table '%s' already exists
Unknown table '%-.100T'
Column '%s' in %s is ambiguous
Server shutdown in progress
Unknown column '%s' in '%s'
'%s' isn't in GROUP BY
Can't group on '%s'
Statement has sum functions and columns in same statement
Column count doesn't match value count
Identifier name '%-.100T' is too long
Duplicate column name '%s'
Duplicate key name '%s'
Duplicate entry '%-.192T' for key %d
Incorrect column specifier for column '%s'
%s near '%-.80T' at line %d
Query was empty
Not unique table/alias: '%s'
Invalid default value for '%s'
Multiple primary key defined
Too many keys specified; max %d keys allowed
Too many key parts specified; max %d parts allowed
Specified key was too long; max key length is %d bytes
Key column '%s' doesn't exist in table
BLOB column %s can't be used in key specification in the %s table
Column length too big for column '%s' (max = %u); use BLOB or TEXT instead
Incorrect table definition; there can be only one auto column and it must be defined as a key
Could not delete gtid domain. Reason: %s.
%s (initiated by: %s): Normal shutdown
%s: Got signal %d. Aborting!n
%s: Shutdown completen
%s: Forcing close of thread %d user: '%s'n
Can't create IP socket
Table '%s' has no index like the one used in CREATE INDEX; recreate the table
Field separator argument is not what is expected; check the manual
You can't use fixed rowlength with BLOBs; please use 'fields terminated by'
The file '%s' must be in the database directory or be readable by all
File '%s' already exists
Records: %d Deleted: %d Skipped: %d Warnings: %d
Records: %d Duplicates: %d
Incorrect prefix key; the used key part isn't a string, the used length is longer than the key part, or the storage engine doesn't support unique prefix keys
You can't delete all columns with ALTER TABLE; use DROP TABLE instead
Can't DROP %s %s; check that it exists
Records: %d Duplicates: %d Warnings: %d
Table '%s' is specified twice, both as a target for '%s' and as a separate source for data
Unknown thread id: %u
You are not owner of thread %u
No tables used
Too many strings for column %s and SET
Can't generate a unique log-filename %s.(1-999)n
Table '%s' was locked with a READ lock and can't be updated
Table '%s' was not locked with LOCK TABLES
You should never see it
Incorrect database name '%-.100T'
Incorrect table name '%s'
The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET MAX_JOIN_SIZE=# if the SELECT is okay
Unknown procedure '%s'
Incorrect parameter count to procedure '%s'
Incorrect parameters to procedure '%s'
Unknown table '%s' in %s
Column '%s' specified twice
Invalid use of group function
Table '%s' uses an extension that doesn't exist in this MariaDB version
A table must have at least 1 column
The table '%s' is full
Unknown character set: '%s'
Too many tables; MariaDB can only use %d tables in a join
Too many columns
Row size too large. The maximum row size for the used table type, not counting BLOBs, is %d. This includes storage overhead, check the manual. You have to change some columns to TEXT or BLOBs
Thread stack overrun: Used: %d of a %d stack. Use 'mysqld --thread_stack=#' to specify a bigger stack if needed
Cross dependency found in OUTER JOIN; examine your ON conditions
Table handler doesn't support NULL in given index. Please change column '%s' to be NOT NULL or use another handler
Can't load function '%s'
Can't initialize function '%s'; %s
No paths allowed for shared library
Function '%s' already exists
Can't open shared library '%s' (errno: %d, %s)
Can't find symbol '%s' in library
Function '%s' is not defined
Host '%s' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
Host '%s' is not allowed to connect to this MariaDB server
You are using MariaDB as an anonymous user and anonymous users are not allowed to modify user settings
You must have privileges to update tables in the mysql database to be able to change passwords for others
Can't find any matching row in the user table
Rows matched: %d Changed: %d Warnings: %d
Can't create a new thread (errno %M); if you are not out of available memory, you can consult the manual for a possible OS-dependent bug
Column count doesn't match value count at row %u
Can't reopen table: '%s'
Invalid use of NULL value
Got error '%s' from regexp
Mixing of GROUP columns (MIN(),MAX(),COUNT(),...) with no GROUP columns is illegal if there is no GROUP BY clause
There is no such grant defined for user '%s' on host '%s'
%-.100T command denied to user '%s' for table '%s'
%s command denied to user '%s' for column '%s' in table '%s'
Illegal GRANT/REVOKE command; please consult the manual to see which privileges can be used
The host or user argument to GRANT is too long
Table '%s.%s' doesn't exist
There is no such grant defined for user '%s' on host '%s' on table '%s'
The used command is not allowed with this MariaDB version
You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use
Delayed insert thread couldn't get requested lock for table %s
Too many delayed threads in use
Aborted connection %d to db: '%s' user: '%s' (%s)
Got a packet bigger than 'max_allowed_packet' bytes
Got a read error from the connection pipe
Got an error from fcntl()
Got packets out of order
Couldn't uncompress communication packet
Got an error reading communication packets
Got timeout reading communication packets
Got an error writing communication packets
Got timeout writing communication packets
Result string is longer than 'max_allowed_packet' bytes
Storage engine %s doesn't support BLOB/TEXT columns
Storage engine %s doesn't support AUTO_INCREMENT columns
INSERT DELAYED can't be used with table '%s' because it is locked with LOCK TABLES
Incorrect column name '%s'
The storage engine %s can't index column %s
Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
Can't write, because of unique constraint, to table '%s'
BLOB/TEXT column '%s' used in key specification without a key length
All parts of a PRIMARY KEY must be NOT NULL; if you need NULL in a key, use UNIQUE instead
Result consisted of more than one row
This table type requires a primary key
This version of MariaDB is not compiled with RAID support
You are using safe update mode and you tried to update a table without a WHERE that uses a KEY column
Key '%s' doesn't exist in table '%s'
Can't open table
The storage engine for the table doesn't support %s
You are not allowed to execute this command in a transaction
Got error %M during COMMIT
Got error %M during ROLLBACK
Got error %M during FLUSH_LOGS
Got error %M during CHECKPOINT
Aborted connection %ld to db: '%s' user: '%s' host: '%s' (%s)
You should never see it
Binlog closed, cannot RESET MASTER
Failed rebuilding the index of dumped table '%s'
Error from master: '%s'
Net error reading from master
Net error writing to master
Can't find FULLTEXT index matching the column list
Can't execute the given command because you have active locked tables or an active transaction
Unknown system variable '%s'
Table '%s' is marked as crashed and should be repaired
Table '%s' is marked as crashed and last (automatic?) repair failed
Some non-transactional changed tables couldn't be rolled back
Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again
This operation cannot be performed as you have a running slave '%s'; run STOP SLAVE '%s' first
This operation requires a running slave; configure slave and do START SLAVE
The server is not configured as slave; fix in config file or with CHANGE MASTER TO
Could not initialize master info structure for '%s'; more error messages can be found in the MariaDB error log
Could not create slave thread; check system resources
User %s already has more than 'max_user_connections' active connections
You may only use constant expressions in this statement
Lock wait timeout exceeded; try restarting transaction
The total number of locks exceeds the lock table size
Update locks cannot be acquired during a READ UNCOMMITTED transaction
DROP DATABASE not allowed while thread is holding global read lock
CREATE DATABASE not allowed while thread is holding global read lock
Incorrect arguments to %s
'%s' is not allowed to create new users
Incorrect table definition; all MERGE tables must be in the same database
Deadlock found when trying to get lock; try restarting transaction
The storage engine %s doesn't support FULLTEXT indexes
Cannot add foreign key constraint
Cannot add or update a child row: a foreign key constraint fails
Cannot delete or update a parent row: a foreign key constraint fails
Error connecting to master: %s
Error running query on master: %s
Error when executing command %s: %s
Incorrect usage of %s and %s
The used SELECT statements have a different number of columns
Can't execute the query because you have a conflicting read lock
Mixing of transactional and non-transactional tables is disabled
Option '%s' used twice in statement
User '%s' has exceeded the '%s' resource (current value: %d)
Access denied; you need (at least one of) the %s privilege(s) for this operation
Variable '%s' is a SESSION variable and can't be used with SET GLOBAL
Variable '%s' is a GLOBAL variable and should be set with SET GLOBAL
Variable '%s' doesn't have a default value
Variable '%s' can't be set to the value of '%-.200T'
Incorrect argument type to variable '%s'
Variable '%s' can only be set, not read
Incorrect usage/placement of '%s'
This version of MariaDB doesn't yet support '%s'
Got fatal error %d from master when reading data from binary log: '%s'
Slave SQL thread ignored the query because of replicate-*-table rules
Variable '%s' is a %s variable
Incorrect foreign key definition for '%s': %s
Key reference and table reference don't match
Operand should contain %d column(s)
Subquery returns more than 1 row
Unknown prepared statement handler (%s) given to %s
Help database is corrupt or does not exist
Cyclic reference on subqueries
Converting column '%s' from %s to %s
Reference '%s' not supported (%s)
Every derived table must have its own alias
Select %u was reduced during optimization
Table '%s' from one of the SELECTs cannot be used in %s
Client does not support authentication protocol requested by server; consider upgrading MariaDB client
All parts of a SPATIAL index must be NOT NULL
COLLATION '%s' is not valid for CHARACTER SET '%s'
Slave is already running
Slave already has been stopped
Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)
ZLIB: Not enough memory
ZLIB: Not enough room in the output buffer (probably, length of uncompressed data was corrupted)
ZLIB: Input data corrupted
Row %u was cut by GROUP_CONCAT()
Row %u doesn't contain data for all columns
Row %u was truncated; it contained more data than there were input columns
Column set to default value; NULL supplied to NOT NULL column '%s' at row %u
Out of range value for column '%s' at row %u
Data truncated for column '%s' at row %u
Using storage engine %s for table '%s'
Illegal mix of collations (%s) and (%s) for operation '%s'
Cannot drop one or more of the requested users
Can't revoke all privileges for one or more of the requested users
Illegal mix of collations (%s), (%s), (%s) for operation '%s'
Illegal mix of collations for operation '%s'
Variable '%s' is not a variable component (can't be used as XXXX.variable_name)
Unknown collation: '%s'
SSL parameters in CHANGE MASTER are ignored because this MariaDB slave was compiled without SSL support; they can be used later if MariaDB slave with SSL is started
Server is running in --secure-auth mode, but '%s' has a password in the old format; please change the password to the new format
Field or reference '%s%s%s' of SELECT #%d was resolved in SELECT #%d
Incorrect parameter or combination of parameters for START SLAVE UNTIL
It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mysqld restart
SQL thread is not to be started so UNTIL options are ignored
Incorrect index name '%s'
Incorrect catalog name '%s'
Query cache failed to set size %lu; new query cache size is %u
Column '%s' cannot be part of FULLTEXT index
Unknown key cache '%s'
MariaDB is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work
Unknown storage engine '%s'
'%s' is deprecated and will be removed in a future release. Please use %s instead
The target table %s of the %s is not updatable
The '%s' feature is disabled; you need MariaDB built with '%s' to have it working
The MariaDB server is running with the %s option so it cannot execute this statement
Column '%s' has duplicated value '%s' in %s
Truncated incorrect %-.32T value: '%-.128T'
Incorrect table definition; there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause
Invalid ON UPDATE clause for '%s' column
This command is not supported in the prepared statement protocol yet
Got error %d '%s' from %s
Got temporary error %d '%s' from %s
Unknown or incorrect time zone: '%s'
Invalid TIMESTAMP value in column '%s' at row %u
Invalid %s character string: '%.64T'
Result of %s() was larger than max_allowed_packet (%d) - truncated
Conflicting declarations: '%s' and '%s'
Can't create a %s from within another stored routine
%s %s already exists
%s %s does not exist
Failed to DROP %s %s
Failed to CREATE %s %s
%s with no matching label: %s
Redefining label %s
End-label %s without match
Referring to uninitialized variable %s
PROCEDURE %s can't return a result set in the given context
RETURN is only allowed in a FUNCTION
%s is not allowed in stored procedures
The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been ignored. This option will be removed in MariaDB 5.6
The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been translated to SET SQL_LOG_BIN. This option will be removed in MariaDB 5.6
Query execution was interrupted
Incorrect number of arguments for %s %s; expected %u, got %u
Undefined CONDITION: %s
No RETURN found in FUNCTION %s
FUNCTION %s ended without RETURN
Cursor statement must be a SELECT
Cursor SELECT must not have INTO
Undefined CURSOR: %s
Cursor is already open
Cursor is not open
Undeclared variable: %s
Incorrect number of FETCH variables
No data - zero rows fetched, selected, or processed
Duplicate parameter: %s
Duplicate variable: %s
Duplicate condition: %s
Duplicate cursor: %s
Failed to ALTER %s %s
Subquery value not supported
%s is not allowed in stored function or trigger
Variable or condition declaration after cursor or handler declaration
Cursor declaration after handler declaration
Case not found for CASE statement
Configuration file '%s' is too big
Malformed file type header in file '%s'
Unexpected end of file while parsing comment '%s'
Error while parsing parameter '%s' (line: '%s')
Unexpected end of file while skipping unknown parameter '%s'
ANALYZE/EXPLAIN/SHOW can not be issued; lacking privileges for underlying table
File '%s' has unknown type '%s' in its header
'%s.%s' is not %s
Column '%s' is not updatable
View's SELECT contains a subquery in the FROM clause
View's SELECT contains a '%s' clause
View's SELECT contains a variable or parameter
View's SELECT refers to a temporary table '%s'
View's SELECT and view's field list have different column counts
View merge algorithm can't be used here for now (assumed undefined algorithm)
View being updated does not have complete key of underlying table in it
View '%s.%s' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them
Can't drop or alter a %s from within another stored routine
GOTO is not allowed in a stored procedure handler
Trigger already exists
Trigger does not exist
Trigger's '%s' is view or temporary table
Updating of %s row is not allowed in %strigger
There is no %s row in %s trigger
Field '%s' doesn't have a default value
Division by 0
Incorrect %s value: '%-.128T' for column `%s`.`%s`.`%s` at row %u
Illegal %s '%-.192T' value found during parsing
CHECK OPTION on non-updatable view %s.%s
CHECK OPTION failed %s.%s
%s command denied to user '%s' for routine '%s'
Failed purging old relay logs: %s
Password hash should be a %digit hexadecimal number
Target log not found in binlog index
I/O error reading log index file
Server configuration does not permit binlog purge
Failed on fseek()
Fatal error during log purge
A purgeable log is in use, will not purge
Unknown error during log purge
Failed initializing relay log position: %s
You are not using binary logging
The '%s' syntax is reserved for purposes internal to the MariaDB server
Can't handle procedures with different groups yet
Select must have a group with this procedure
Can't use ORDER clause with this procedure
Binary logging and replication forbid changing the global server %s
Can't map file: %s, errno: %M
Wrong magic in %s
Prepared statement contains too many placeholders
Key part '%s' length cannot be 0
View text checksum failed
Can not modify more than one base table through a join view '%s.%s'
Can not insert into join view '%s.%s' without fields list
Can not delete from join view '%s.%s'
Operation %s failed for %s
XAER_NOTA: Unknown XID
XAER_INVAL: Invalid arguments (or unsupported command)
XAER_RMFAIL: The command cannot be executed when global transaction is in the %s state
XAER_OUTSIDE: Some work is done outside global transaction
XAER_RMERR: Fatal error occurred in the transaction branch - check your data for consistency
XA_RBROLLBACK: Transaction branch was rolled back
There is no such grant defined for user '%s' on host '%s' on routine '%s'
Failed to grant EXECUTE and ALTER ROUTINE privileges
Failed to revoke all privileges to dropped routine
Data too long for column '%s' at row %u
Bad SQLSTATE: '%s'
%s: ready for connections.nVersion: '%s' socket: '%s' port: %d %s
Can't load value from file with fixed size rows to variable
You are not allowed to create a user with GRANT
Incorrect %s value: '%-.128T' for function %s
Table definition has changed, please retry transaction
Duplicate handler declared in the same block
OUT or INOUT argument %d for routine %s is not a variable or NEW pseudo-variable in BEFORE trigger
Not allowed to return a result set from a %s
Cannot get geometry object from data you send to the GEOMETRY field
A routine failed and has neither NO SQL nor READS SQL DATA in its declaration and binary logging is enabled; if non-transactional tables were updated, the binary log will miss their changes
This function has none of DETERMINISTIC, NO SQL, or READS SQL DATA in its declaration and binary logging is enabled (you *might* want to use the less safe log_bin_trust_function_creators variable)
You do not have the SUPER privilege and binary logging is enabled (you *might* want to use the less safe log_bin_trust_function_creators variable)
You can't execute a prepared statement which has an open cursor associated with it. Reset the statement to re-execute it
The statement (%u) has no open cursor
Explicit or implicit commit is not allowed in stored function or trigger
Field of view '%s.%s' underlying table doesn't have a default value
Recursive stored functions and triggers are not allowed
Too big scale %lu specified for '%s'. Maximum is %u
Too big precision %lu specified for '%s'. Maximum is %u
For float(M,D), double(M,D) or decimal(M,D), M must be >= D (column '%s')
You can't combine write-locking of system tables with other tables or lock types
Unable to connect to foreign data source: %s
There was a problem processing the query on the foreign data source. Data source error: %s
The foreign data source you are trying to reference does not exist. Data source error: %s
Can't create federated table. The data source connection string '%s' is not in the correct format
The data source connection string '%s' is not in the correct format
Can't create federated table. Foreign data src error: %s
Trigger in wrong schema
Thread stack overrun: %d bytes used of a %d byte stack, and %d bytes needed. Use 'mysqld --thread_stack=#' to specify a bigger stack
Routine body for '%s' is too long
Cannot drop default keycache
Display width out of range for '%s' (max = %u)
XAER_DUPID: The XID already exists
Datetime function: %s field overflow
Can't update table '%s' in stored function/trigger because it is already used by statement which invoked this stored function/trigger
The definition of table '%s' prevents operation %s on table '%s'
The prepared statement contains a stored routine call that refers to that same statement. It's not allowed to execute a prepared statement in such a recursive manner
Not allowed to set autocommit from a stored function or trigger
View '%s'.'%s' has no definer information (old table format). Current user is used as definer. Please recreate the view!
You need the SUPER privilege for creation view with '%s'@'%s' definer
The user specified as a definer ('%s'@'%s') does not exist
Changing schema from '%s' to '%s' is not allowed
Cannot delete or update a parent row: a foreign key constraint fails (%s)
Cannot add or update a child row: a foreign key constraint fails (%s)
Variable '%s' must be quoted with `...`, or renamed
No definer attribute for trigger '%s'.'%s'. The trigger will be activated under the authorization of the invoker, which may have insufficient privileges. Please recreate the trigger
'%s' has an old format, you should re-create the '%s' object(s)
Recursive limit %d (as set by the max_sp_recursion_depth variable) was exceeded for routine %s
Failed to load routine %s. The table mysql.proc is missing, corrupt, or contains bad data (internal code %d)
Incorrect routine name '%s'
Upgrade required. Please do "REPAIR %s %s" or dump/reload to fix it!
AGGREGATE is not supported for stored functions
Can't create more than max_prepared_stmt_count statements (current value: %u)
`%s`.`%s` contains view recursion
Non-grouping field '%s' is used in %s clause
The storage engine %s doesn't support SPATIAL indexes
Triggers can not be created on system tables
Leading spaces are removed from name '%s'
Failed to read auto-increment value from storage engine
String '%-.70T' is too long for %s (should be no longer than %d)
The target table %s of the %s is not insertable-into
Table '%s' is differently defined or of non-MyISAM type or doesn't exist
Too high level of nesting for select
Name '%s' has become ''
First character of the FIELDS TERMINATED string is ambiguous; please use non-optional and non-empty FIELDS ENCLOSED BY
The foreign server, %s, you are trying to create already exists
The foreign server name you are trying to reference does not exist. Data source error: %s
Table storage engine '%s' does not support the create option '%s'
Syntax error: %s PARTITIONING requires definition of VALUES %s for each partition
Only %s PARTITIONING can use VALUES %s in partition definition
MAXVALUE can only be used in last partition definition
Subpartitions can only be hash partitions and by key
Must define subpartitions on all partitions if on one partition
Wrong number of partitions defined, mismatch with previous setting
Wrong number of subpartitions defined, mismatch with previous setting
Constant, random or timezone-dependent expressions in (sub)partitioning function are not allowed
Expression in RANGE/LIST VALUES must be constant
Field in list of fields for partition function not found in table
List of fields is only allowed in KEY partitions
The partition info in the frm file is not consistent with what can be written into the frm file
The %s function returns the wrong type
For %s partitions each partition must be defined
VALUES LESS THAN value must be strictly increasing for each partition
VALUES value must be of same type as partition function
Multiple definition of same constant in list partitioning
Partitioning can not be used stand-alone in query
The mix of handlers in the partitions is not allowed in this version of MariaDB
For the partitioned engine it is necessary to define all %s
Too many partitions (including subpartitions) were defined
It is only possible to mix RANGE/LIST partitioning with HASH/KEY partitioning for subpartitioning
Failed to create specific handler file
A BLOB field is not allowed in partition function
A %s must include all columns in the table's partitioning function
Number of %s = 0 is not an allowed value
Partition management on a not partitioned table is not possible
Foreign key clause is not yet supported in conjunction with partitioning
Error in list of partitions to %s
Cannot remove all partitions, use DROP TABLE instead
COALESCE PARTITION can only be used on HASH/KEY partitions
REORGANIZE PARTITION can only be used to reorganize partitions not to change their numbers
REORGANIZE PARTITION without parameters can only be used on auto-partitioned tables using HASH PARTITIONs
%s PARTITION can only be used on RANGE/LIST partitions
Trying to Add partition(s) with wrong number of subpartitions
At least one partition must be added
At least one partition must be coalesced
More partitions to reorganize than there are partitions
Duplicate partition name %s
It is not allowed to shut off binlog on this command
When reorganizing a set of partitions they must be in consecutive order
Reorganize of range partitions cannot change total ranges except for last partition where it can extend the range
Partition function not supported in this version for this handler
Partition state cannot be defined from CREATE/ALTER TABLE
The %s handler only supports 32 bit integers in VALUES
Plugin '%s' is not loaded
Incorrect %s value: '%-.128T'
Table has no partition for value %s
It is not allowed to specify %s more than once
Failed to create %s
Failed to drop %s
The handler doesn't support autoextend of tablespaces
A size parameter was incorrectly specified, either number or on the form 10M
The size number was correct but we don't allow the digit part to be more than 2 billion
Failed to alter: %s
Writing one row to the row-based binary log failed
Table definition on master and slave does not match: %s
Slave running with --log-slave-updates must use row-based binary logging to be able to replicate row-based binary log events
Event '%s' already exists
Failed to store event %s. Error code %M from storage engine
Unknown event '%s'
Failed to alter event '%s'
Failed to drop %s
INTERVAL is either not positive or too big
ENDS is either invalid or before STARTS
Event execution time is in the past. Event has been disabled
Failed to open mysql.event
No datetime expression provided
You should never see it
You should never see it
Failed to delete the event from mysql.event
Error during compilation of event's body
Same old and new event name
Data for column '%s' too long
Cannot drop index '%s': needed in a foreign key constraint
The syntax '%s' is deprecated and will be removed in MariaDB %s. Please use %s instead
You can't write-lock a log table. Only read access is possible
You can't use locks with log tables
You should never see it
Column count of mysql.%s is wrong. Expected %d, found %d. Created with MariaDB %d, now running %d. Please use mysql_upgrade to fix this error
Cannot switch out of the row-based binary log format when the session has open temporary tables
Cannot change the binary logging format inside a stored function or trigger
You should never see it
Cannot create temporary table with partitions
Partition constant is out of partition function domain
This partition function is not allowed
Error in DDL log
Not allowed to use NULL value in VALUES LESS THAN
Incorrect partition name
Transaction characteristics can't be changed while a transaction is in progress
ALTER TABLE causes auto_increment resequencing, resulting in duplicate entry '%-.192T' for key '%s'
Internal scheduler error %d
Error during starting/stopping of the scheduler. Error code %M
Engine cannot be used in partitioned tables
Cannot activate '%s' log
The server was not built with row-based replication
Decoding of base64 string failed
Recursion of EVENT DDL statements is forbidden when body is present
Cannot proceed, because event scheduler is disabled
Only integers allowed as number here
Storage engine %s cannot be used for log tables
You cannot '%s' a log table if logging is enabled
Cannot rename '%s'. When logging enabled, rename to/from log table must rename two tables: the log table to an archive table and another table back to '%s'
Incorrect parameter count in the call to native function '%s'
Incorrect parameters in the call to native function '%s'
Incorrect parameters in the call to stored function '%s'
This function '%s' has the same name as a native function
Duplicate entry '%-.64T' for key '%s'
Too many files opened, please execute the command again
Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was dropped immediately after creation
Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was not changed. Specify a time in the future
The incident %s occurred on the master. Message: %s
Table has no partition for some existing values
Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. %s
Fatal error: %s
Relay log read failure: %s
Relay log write failure: %s
Failed to create %s
Master command %s failed: %s
Binary logging not possible. Message: %s
View `%s`.`%s` has no creation context
Creation context of view `%s`.`%s' is invalid
Creation context of stored routine `%s`.`%s` is invalid
Corrupted TRG file for table `%s`.`%s`
Triggers for table `%s`.`%s` have no creation context
Trigger creation context of table `%s`.`%s` is invalid
Creation context of event `%s`.`%s` is invalid
Cannot open table for trigger `%s`.`%s`
Cannot create stored routine `%s`. Check warnings
You should never see it
The BINLOG statement of type `%s` was not preceded by a format description BINLOG statement
Corrupted replication event was detected
Invalid column reference (%s) in LOAD DATA
Being purged log %s was not found
XA_RBTIMEOUT: Transaction branch was rolled back: took too long
XA_RBDEADLOCK: Transaction branch was rolled back: deadlock was detected
Prepared statement needs to be re-prepared
DELAYED option not supported for table '%s'
There is no master connection '%s'
<%s> option ignored
Built-in plugins cannot be deleted
Plugin is busy and will be uninstalled on shutdown
%s variable '%s' is read-only. Use SET %s to assign the value
Storage engine %s does not support rollback for this statement. Transaction rolled back and must be restarted
Unexpected master's heartbeat data: %s
The requested value for the heartbeat period is either negative or exceeds the maximum allowed (%u seconds)
You should never see it
Error in parsing conflict function. Message: %s
Write to exceptions table failed. Message: %s"
Comment for table '%s' is too long (max = %u)
Comment for field '%s' is too long (max = %u)
FUNCTION %s does not exist. Check the 'Function Name Parsing and Resolution' section in the Reference Manual
Too many active concurrent transactions
Non-ASCII separator arguments are not fully supported
debug sync point wait timed out
debug sync point hit limit reached
Duplicate condition information item '%s'
Unhandled user-defined warning condition
Unhandled user-defined not found condition
Unhandled user-defined exception condition
RESIGNAL when handler not active
SIGNAL/RESIGNAL can only use a CONDITION defined with SQLSTATE
Data truncated for condition item '%s'
Data too long for condition item '%s'
Unknown locale: '%s'
The requested server id %d clashes with the slave startup option --replicate-same-server-id
Query cache is disabled; set query_cache_type to ON or DEMAND to enable it
Duplicate partition field name '%s'
Inconsistency in usage of column lists for partitioning
Partition column values of incorrect type
Too many fields in '%s'
Cannot use MAXVALUE as value in VALUES IN
Cannot have more than one value for this type of %s partitioning
Row expressions in VALUES IN only allowed for multi-field column partitioning
Field '%s' is of a not allowed type for this type of partitioning
The total length of the partitioning fields is too large
Cannot execute statement: impossible to write to binary log since both row-incapable engines and statement-incapable engines are involved
Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = ROW and at least one table uses a storage engine limited to statement-based logging
Cannot execute statement: impossible to write to binary log since statement is unsafe, storage engine is limited to statement-based logging, and BINLOG_FORMAT = MIXED. %s
Cannot execute statement: impossible to write to binary log since statement is in row format and at least one table uses a storage engine limited to statement-based logging
Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging.%s
Cannot execute statement: impossible to write to binary log since statement is in row format and BINLOG_FORMAT = STATEMENT
Cannot execute statement: impossible to write to binary log since more than one engine is involved and at least one engine is self-logging
The statement is unsafe because it uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted
The statement is unsafe because it uses INSERT DELAYED. This is unsafe because the times when rows are inserted cannot be predicted
The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves
Statement is unsafe because it invokes a trigger or a stored function that inserts into an AUTO_INCREMENT column. Inserted values cannot be logged correctly
Statement is unsafe because it uses a UDF which may not return the same value on the slave
Statement is unsafe because it uses a system variable that may have a different value on the slave
Statement is unsafe because it uses a system function that may return a different value on the slave
Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction
%s Statement: %s
Column %d of table '%s.%s' cannot be converted from type '%s' to type '%s'
Can't create conversion table for table '%s.%s'
Cannot modify @@session.binlog_format inside a transaction
The path specified for %.64T is too long
'%s' is deprecated and will be removed in a future release
Native table '%s'.'%s' has the wrong structure
Invalid performance_schema usage
Table '%s' was skipped since its definition is being modified by concurrent DDL statement
Cannot modify @@session.binlog_direct_non_transactional_updates inside a transaction
Cannot change the binlog direct flag inside a stored function or trigger
A SPATIAL index may only contain a geometrical type column
Comment for index '%s' is too long (max = %u)
Wait on a lock was aborted due to a pending exclusive lock
%s value is out of range in '%s'
A variable of a non-integer based type in LIMIT clause
Mixing self-logging and non-self-logging engines in a statement is unsafe
Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them
Cannot modify @@session.sql_log_bin inside a transaction
Cannot change the sql_log_bin inside a stored function or trigger
Failed to read from the .par file
VALUES value for partition '%s' must have type INT
Access denied for user '%s'
SET PASSWORD has no significance for users authenticating via plugins
GRANT with IDENTIFIED WITH is illegal because the user %s already exists
Cannot truncate a table referenced in a foreign key constraint (%s)
Plugin '%s' is force_plus_permanent and can not be unloaded
The requested value for the heartbeat period is less than 1 millisecond. The value is reset to 0, meaning that heartbeating will effectively be disabled
The requested value for the heartbeat period exceeds the value of `slave_net_timeout' seconds. A sensible value for the period should be less than the timeout
Multi-row statements required more than 'max_binlog_stmt_cache_size' bytes of storage; increase this mysqld variable and try again
Primary key/partition key update is not allowed since the table is updated both as '%s' and '%s'
Table rebuild required. Please do "ALTER TABLE `%-.32T` FORCE" or dump/reload to fix it!
The value of '%s' should be no less than the value of '%s'
Index column size too large. The maximum column size is %u bytes
Trigger '%s' has an error in its body: '%s'
Unknown trigger has an error in its body: '%s'
Index %s is corrupted
Undo log record is too big
INSERT IGNORE... SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave
INSERT... SELECT... ON DUPLICATE KEY UPDATE is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are updated. This order cannot be predicted and may differ on master and the slave
REPLACE... SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are replaced. This order cannot be predicted and may differ on master and the slave
CREATE... IGNORE SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave
CREATE... REPLACE SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are replaced. This order cannot be predicted and may differ on master and the slave
UPDATE IGNORE is unsafe because the order in which rows are updated determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave
You should never see it
You should never see it
Statements writing to a table with an auto-increment column after selecting from another table are unsafe because the order in which rows are retrieved determines what (if any) rows will be written. This order cannot be predicted and may differ on master and the slave
CREATE TABLE... SELECT... on a table with an auto-increment column is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are inserted. This order cannot be predicted and may differ on master and the slave
INSERT... ON DUPLICATE KEY UPDATE on a table with more than one UNIQUE KEY is unsafe
Table is being used in foreign key check
You should never see it
INSERT into autoincrement field which is not the first part in the composed primary key is unsafe
Cannot load from %s. The table is probably corrupted
The requested value %u for the master delay exceeds the maximum %u
Only Format_description_log_event and row events are allowed in BINLOG statements (but %s was provided)
Non matching attribute '%s' between partition and table
Table to exchange with partition is partitioned: '%s'
Table to exchange with partition is temporary: '%s'
Subpartitioned table, use subpartition instead of partition
Unknown partition '%s' in table '%s'
Tables have different definitions
Found a row that does not match the partition
Option binlog_cache_size (%u) is greater than max_binlog_cache_size (%u); setting binlog_cache_size equal to max_binlog_cache_size
Cannot use %s access on index '%s' due to type or collation conversion on field '%s'
Table to exchange with partition has foreign key references: '%s'
Key value '%s' was not found in table '%s.%s'
Too long value for '%s'
Replication event checksum verification failed while reading from network
Replication event checksum verification failed while reading from a log file
Option binlog_stmt_cache_size (%u) is greater than max_binlog_stmt_cache_size (%u); setting binlog_stmt_cache_size equal to max_binlog_stmt_cache_size
Can't update table '%s' while '%s' is being created
PARTITION () clause on non partitioned table
Found a row not matching the given partition set
You should never see it
Failure while changing the type of replication repository: %s
The creation of some temporary tables could not be rolled back
Some temporary tables were dropped, but these operations could not be rolled back
%s is not supported in multi-threaded slave mode. %s
The number of modified databases exceeds the maximum %d; the database names will not be included in the replication event metadata
Cannot execute the current event group in the parallel mode. Encountered event %s, relay-log name %s, position %s which prevents execution of this event group in parallel mode. Reason: %s
FULLTEXT index is not supported for partitioned tables
Invalid condition number
Sending passwords in plain text without SSL/TLS is extremely insecure
Storing MySQL user name or password information in the master.info repository is not secure and is therefore not recommended. Please see the MySQL Manual for more about this issue and possible alternatives
Foreign key constraint for table '%s', record '%s' would lead to a duplicate entry in table '%s', key '%s'
Foreign key constraint for table '%s', record '%s' would lead to a duplicate entry in a child table
Setting authentication options is not possible when only the Slave SQL Thread is being started
The table does not have FULLTEXT index to support this query
The system variable %s cannot be set in stored functions or triggers
The system variable %s cannot be set when there is an ongoing transaction
The system variable @@SESSION.GTID_NEXT has the value %s, which is not listed in @@SESSION.GTID_NEXT_LIST
When @@SESSION.GTID_NEXT_LIST == NULL, the system variable @@SESSION.GTID_NEXT cannot change inside a transaction
The statement 'SET %s' cannot invoke a stored function
The system variable @@SESSION.GTID_NEXT cannot be 'AUTOMATIC' when @@SESSION.GTID_NEXT_LIST is non-NULL
Skipping transaction %s because it has already been executed and logged
Malformed GTID set specification '%s'
Malformed GTID set encoding
Malformed GTID specification '%s'
Impossible to generate Global Transaction Identifier: the integer component reached the maximal value. Restart the server with a new server_uuid
Parameters MASTER_LOG_FILE, MASTER_LOG_POS, RELAY_LOG_FILE and RELAY_LOG_POS cannot be set when MASTER_AUTO_POSITION is active
CHANGE MASTER TO MASTER_AUTO_POSITION = 1 can only be executed when GTID_MODE = ON
Cannot execute statements with implicit commit inside a transaction when GTID_NEXT != AUTOMATIC or GTID_NEXT_LIST != NULL
GTID_MODE = ON or GTID_MODE = UPGRADE_STEP_2 requires ENFORCE_GTID_CONSISTENCY = 1
GTID_MODE = ON or UPGRADE_STEP_1 or UPGRADE_STEP_2 requires --log-bin and --log-slave-updates
GTID_NEXT cannot be set to UUID:NUMBER when GTID_MODE = OFF
GTID_NEXT cannot be set to ANONYMOUS when GTID_MODE = ON
GTID_NEXT_LIST cannot be set to a non-NULL value when GTID_MODE = OFF
Found a Gtid_log_event or Previous_gtids_log_event when GTID_MODE = OFF
When ENFORCE_GTID_CONSISTENCY = 1, updates to non-transactional tables can only be done in either autocommitted statements or single-statement transactions, and never in the same statement as updates to transactional tables
CREATE TABLE ... SELECT is forbidden when ENFORCE_GTID_CONSISTENCY = 1
When ENFORCE_GTID_CONSISTENCY = 1, the statements CREATE TEMPORARY TABLE and DROP TEMPORARY TABLE can be executed in a non-transactional context only, and require that AUTOCOMMIT = 1
The value of GTID_MODE can only change one step at a time: OFF <-> UPGRADE_STEP_1 <-> UPGRADE_STEP_2 <-> ON. Also note that this value must be stepped up or down simultaneously on all servers; see the Manual for instructions.
The slave is connecting using CHANGE MASTER TO MASTER_AUTO_POSITION = 1, but the master has purged binary logs containing GTIDs that the slave requires
GTID_NEXT cannot be changed by a client that owns a GTID. The client owns %s. Ownership is released on COMMIT or ROLLBACK
Unknown EXPLAIN format name: '%s'
Cannot execute statement in a READ ONLY transaction
Comment for table partition '%s' is too long (max = %u)
Slave is not configured or failed to initialize properly. You must at least set --server-id to enable either a master or a slave. Additional error messages can be found in the MySQL error log
InnoDB presently supports one FULLTEXT index creation at a time
Cannot create FULLTEXT index on temporary InnoDB table
Column '%s' is of wrong type for an InnoDB FULLTEXT index
Index '%s' is of wrong type for an InnoDB FULLTEXT index
Creating index '%s' required more than 'innodb_online_alter_log_max_size' bytes of modification log. Please try again
Unknown ALGORITHM '%s'
Unknown LOCK type '%s'
CHANGE MASTER cannot be executed when the slave was stopped with an error or killed in MTS mode. Consider using RESET SLAVE or START SLAVE UNTIL
Cannot recover after SLAVE errored out in parallel execution mode. Additional error messages can be found in the MySQL error log
Cannot clean up worker info tables. Additional error messages can be found in the MySQL error log
Column count of %s is wrong. Expected %d, found %d. The table is probably corrupted
Slave must silently retry current transaction
There is a foreign key check running on table '%s'. Cannot discard the table
Schema mismatch (%s)
Table %s in system tablespace
IO Read error: (%u, %s) %s
IO Write error: (%u, %s) %s
Tablespace is missing for table '%s'
Tablespace for table '%s' exists. Please DISCARD the tablespace before IMPORT
Tablespace has been discarded for table %s
Internal error: %s
ALTER TABLE '%s' IMPORT TABLESPACE failed with error %u : '%s'
Index corrupt: %s
YEAR(%u) column type is deprecated. Creating YEAR(4) column instead
Your password does not satisfy the current policy requirements
You must SET PASSWORD before executing this statement
Failed to add the foreign key constaint. Missing index for constraint '%s' in the foreign table '%s'
Failed to add the foreign key constaint. Missing index for constraint '%s' in the referenced table '%s'
Failed to add the foreign key constraint '%s' to system tables
Failed to open the referenced table '%s'
Failed to add the foreign key constraint on table '%s'. Incorrect options in FOREIGN KEY constraint '%s'
Duplicate %s constraint name '%s'
The password hash doesn't have the expected format. Check if the correct password algorithm is being used with the PASSWORD() function
Cannot drop column '%s': needed in a foreign key constraint '%s'
Cannot drop column '%s': needed in a foreign key constraint '%s' of table %s
Column '%s' cannot be NOT NULL: needed in a foreign key constraint '%s' SET NULL
Duplicate index %s. This is deprecated and will be disallowed in a future release
Cannot change column '%s': used in a foreign key constraint '%s'
Cannot change column '%s': used in a foreign key constraint '%s' of table '%s'
Cannot delete rows from table which is parent in a foreign key constraint '%s' of table '%s'
Malformed communication packet
Running in read-only mode
When GTID_NEXT is set to a GTID, you must explicitly set it again after a COMMIT or ROLLBACK. If you see this error message in the slave SQL thread, it means that a table in the current transaction is transactional on the master and non-transactional on the slave. In a client connection, it means that you executed SET GTID_NEXT before a transaction and forgot to set GTID_NEXT to a different identifier or to 'AUTOMATIC' after COMMIT or ROLLBACK. Current GTID_NEXT is '%s'
The system variable %s cannot be set in stored procedures
GTID_PURGED can only be set when GTID_MODE = ON
GTID_PURGED can only be set when GTID_EXECUTED is empty
GTID_PURGED can only be set when there are no ongoing transactions (not even in other clients)
GTID_PURGED was changed from '%s' to '%s'
GTID_EXECUTED was changed from '%s' to '%s'
Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT, and both replicated and non replicated tables are written to
%s is not supported for this operation. Try %s
%s is not supported. Reason: %s. Try %s
COPY algorithm requires a lock
Partition specific operations do not yet support LOCK/ALGORITHM
Columns participating in a foreign key are renamed
Cannot change column type INPLACE
Adding foreign keys needs foreign_key_checks=OFF
Creating unique indexes with IGNORE requires COPY algorithm to remove duplicate rows
Dropping a primary key is not allowed without also adding a new primary key
Adding an auto-increment column requires a lock
Cannot replace hidden FTS_DOC_ID with a user-visible one
Cannot drop or rename FTS_DOC_ID
Fulltext index creation requires a lock
sql_slave_skip_counter can not be set when the server is running with GTID_MODE = ON. Instead, for each transaction that you want to skip, generate an empty transaction with the same GTID as the transaction
Duplicate entry for key '%s'
Long database name and identifier for object resulted in path length exceeding %d characters. Path: '%s'
cannot silently convert NULL values, as required in this SQL_MODE
Your password has expired. To log in you must change it using a client that supports expired passwords
Found a row in wrong partition %s
Cannot schedule event %s, relay-log name %s, position %s to Worker thread because its size %u exceeds %u of slave_pending_jobs_size_max
Cannot CREATE FULLTEXT INDEX WITH PARSER on InnoDB table
The binary log file '%s' is logically corrupted: %s
file %s was not purged because it was being read by %d thread(s), purged only %d out of %d files
file %s was not purged because it is the active log file
Auto-increment value in UPDATE conflicts with internally generated values
Row events are not logged for %s statements that modify BLACKHOLE tables in row format. Table(s): '%s'
Slave failed to initialize master info structure from the repository
Slave failed to initialize relay log info structure from the repository
Access denied trying to change to user '%s'@'%s' (using password: %s). Disconnecting
InnoDB is in read only mode
STOP SLAVE command execution is incomplete: Slave SQL thread got the stop signal, thread is busy, SQL thread will stop once the current task is complete
STOP SLAVE command execution is incomplete: Slave IO thread got the stop signal, thread is busy, IO thread will stop once the current task is complete
Operation cannot be performed. The table '%s.%s' is missing, corrupt or contains bad data
Temporary file write failure
Upgrade index name failed, please use create index(alter table) algorithm copy to rebuild index
Function or expression '%s' cannot be used in the %s clause of %s
Primary key cannot be defined upon a generated column
Key/Index cannot be defined on a virtual generated column
Cannot define foreign key with %s clause on a generated column
The value specified for generated column '%s' in table '%s' has been ignored
This is not yet supported for generated columns
%s storage engine does not support generated columns
Unknown option '%s'
Incorrect value '%-.64T' for option '%s'
You should never see it
You should never see it
You should never see it
Got overflow when converting '%s' to %s. Value truncated
Truncated value '%s' when converting to %s
Encountered illegal value '%s' when converting to %s
Encountered illegal format of dynamic column string
Dynamic column implementation limit reached
Illegal value used as argument of dynamic column function
Dynamic column contains unknown character set
At least one of the 'in_to_exists' or 'materialization' optimizer_switch flags must be 'on'
Query cache is disabled (resize or similar command in progress); repeat this command later
Query cache is globally disabled and you can't enable it only for this session
View '%s'.'%s' ORDER BY clause ignored because there is other ORDER BY clause already
Connection was killed
You should never see it
Cannot modify @@session.skip_replication inside a transaction
Cannot modify @@session.skip_replication inside a stored function or trigger
Query execution was interrupted. The query examined at least %lu rows, which exceeds LIMIT ROWS EXAMINED (%lu). The query result may be incomplete
Table '%s.%s' doesn't exist in engine
Target is not running an EXPLAINable command
Connection '%s' conflicts with existing connection '%s'
Can't %s SLAVE '%s'
SLAVE '%s' started
SLAVE '%s' stopped
Engine %s failed to discover table %s.%s with '%s'
Failed initializing replication GTID state
Could not parse GTID list
Could not update replication slave gtid state
GTID %u-%lu and %u-%lu conflict (duplicate domain id %u)
Failed to open %s
Connecting slave requested to start from GTID %u-%lu, which is not in the master's binlog
Failed to load replication slave GTID position from table %s
Specified GTID %u-%lu conflicts with the binary log which contains a more recent GTID %u-%lu. If MASTER_GTID_POS=CURRENT_POS is used, the binlog position will override the new value of @@gtid_slave_pos
Specified value for @@gtid_slave_pos contains no value for replication domain %u. This conflicts with the binary log which contains GTID %u-%lu. If MASTER_GTID_POS=CURRENT_POS is used, the binlog position will override the new value of @@gtid_slave_pos
START SLAVE UNTIL master_gtid_pos requires that slave is using GTID
An attempt was made to binlog GTID %u-%lu which would create an out-of-order sequence number with existing GTID %u-%lu, and gtid strict mode is enabled
The binlog on the master is missing the GTID %u-%lu requested by the slave (even though a subsequent sequence number does exist), and GTID strict mode is enabled
Unexpected GTID received from master after reconnect. This normally indicates that the master server was replaced without restarting the slave threads. %s
Cannot modify @@session.gtid_domain_id or @@session.gtid_seq_no inside a transaction
Cannot modify @@session.gtid_domain_id or @@session.gtid_seq_no inside a stored function or trigger
Connecting slave requested to start from GTID %u-%lu, which is not in the master's binlog. Since the master's binlog contains GTIDs with higher sequence numbers, it probably means that the slave has diverged due to executing extra erroneous transactions
This operation is not allowed if any GTID has been logged to the binary log. Run RESET MASTER first to erase the log
Unknown query id: %ld
Bad base64 data as position %u
Invalid role specification %s
The current user is invalid
Cannot grant role '%s' to: %s
Cannot revoke role '%s' from: %s
Cannot change @@slave_parallel_threads while another change is in progress
Commit failed due to failure of an earlier commit on which this one depends
'%s' is a view
When using parallel replication and GTID with multiple replication domains, @@sql_slave_skip_counter can not be used. Instead, setting @@gtid_slave_pos explicitly can be used to skip to after a given GTID position
The definition for table %s is too big
Plugin '%s' already installed
Query execution was interrupted (max_statement_time exceeded)
%s does not support subqueries or stored functions
The system variable %s cannot be set in SET STATEMENT
You should never see it
Can't create user '%s'@'%s'; it already exists
Can't drop user '%s'@'%s'; it doesn't exist
Can't create role '%s'; it already exists
Can't drop role '%s'; it doesn't exist
Cannot convert '%s' character 0x%s to '%s'
Incorrect default value '%-.128T' for column '%s'
You are not owner of query %u
Engine-independent statistics are not collected for column '%s'
Aggregate function '%s)' of SELECT #%d belongs to SELECT #%d
<%s> option ignored for InnoDB partition
File %s is corrupted
Query partially completed on the master (error on master: %d) and was aborted. There is a chance that your master is inconsistent at this point. If you are sure that your master is ok, run this query manually on the slave and then restart the slave with SET GLOBAL SQL_SLAVE_SKIP_COUNTER=1; START SLAVE;. Query:'%s'
Query caused different errors on master and slave. Error on master: message (format)='%s' error code=%d; Error on slave:actual message='%s', error code=%d. Default database:'%s'. Query:'%s'
Storage engine for table '%s' is not loaded
GET STACKED DIAGNOSTICS when handler not active
%s is no longer supported. The statement was converted to %s.
Statement is unsafe because it uses a fulltext parser plugin which may not return the same value on the slave
Cannot DISCARD/IMPORT tablespace associated with temporary table
Foreign key cascade delete/update exceeds max depth of %d
Column count of %s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please use mysql_upgrade to fix this error.
Trigger %s.%s does not have CREATED attribute
Referenced trigger '%s' for the given action time and event type does not exist
EXPLAIN FOR CONNECTION command is supported only for SELECT/UPDATE/INSERT/DELETE/REPLACE
Invalid size for column '%s'
Table storage engine '%s' found required create option missing
Out of memory in storage engine '%s'
The password for anonymous user cannot be expired
This operation cannot be performed with a running slave sql thread; run STOP SLAVE SQL_THREAD first
Cannot create FULLTEXT index on materialized subquery
Undo Log error: %s
Invalid argument for logarithm
This operation cannot be performed with a running slave io thread; run STOP SLAVE IO_THREAD FOR CHANNEL '%s' first
This operation may not be safe when the slave has temporary tables. The tables will be kept open until the server restarts or until the tables are deleted by any replicated DROP statement. Suggest to wait until slave_open_temp_tables = 0.
CHANGE MASTER TO with a MASTER_LOG_FILE clause but no MASTER_LOG_POS clause may not be safe. The old position value may not be valid for the new binary log file.
Query execution was interrupted, maximum statement execution time exceeded
Select is not a read only statement, disabling timer
Duplicate entry '%s'
'%s' mode no longer has any effect. Use STRICT_ALL_TABLES or STRICT_TRANS_TABLES instead.
Expression #%u of ORDER BY contains aggregate function and applies to a UNION
Expression #%u of ORDER BY contains aggregate function and applies to the result of a non-aggregated query
Slave worker has stopped after at least one previous worker encountered an error when slave-preserve-commit-order was enabled. To preserve commit order, the last transaction executed by this thread has not been committed. When restarting the slave after fixing any failed threads, you should fix this worker as well.
slave_preserve_commit_order is not supported %s
The server is currently in offline mode
Binary geometry function %s given two geometries of different srids: %u and %u, which should have been identical
Calling geometry function %s with unsupported types of arguments
Unknown GIS error occured in function %s
Unknown exception caught in GIS function %s
Invalid GIS data provided to function %s
The geometry has no data in function %s
Unable to calculate centroid because geometry is empty in function %s
Geometry overlay calculation error: geometry data is invalid in function %s
Geometry turn info calculation error: geometry data is invalid in function %s
Analysis procedures of intersection points interrupted unexpectedly in function %s
Unknown exception thrown in function %s
Memory allocation error: %s in function %s
Domain error: %s in function %s
Length error: %s in function %s
Invalid argument error: %s in function %s
Out of range error: %s in function %s
Overflow error error: %s in function %s
Range error: %s in function %s
Underflow error: %s in function %s
Logic error: %s in function %s
Runtime error: %s in function %s
Unknown exception: %s in function %s
Geometry byte string must be little endian
The password provided for the replication user exceeds the maximum length of 32 characters
Incorrect user-level lock name '%s'
Deadlock found when trying to get user-level lock; try rolling back transaction/releasing locks and restarting lock acquisition
REPLACE cannot be executed as it requires deleting rows that are not in the view
Do not support online operation on table with GIS index
COM_MULTI can't return a result set in the given context
Command '%s' is not allowed for COM_MULTI
WITH column list and SELECT field list have different column counts
Too many WITH elements in WITH clause
Duplicate query name in WITH clause '%s'
No anchors for recursive WITH element '%s'
Unacceptable mutual recursion with anchored table '%s'
Reference to recursive WITH table '%s' in materialized derived
Restrictions imposed on recursive definitions are violated for table '%s'
Window specification with name '%s' is not defined
Multiple window specifications with the same name '%s'
Window specification referencing another one '%s' cannot contain partition list
Referenced window specification '%s' already contains order list
Referenced window specification '%s' cannot contain window frame
Unacceptable combination of window frame bound specifications
Window function is allowed only in SELECT list and ORDER BY clause
Window function is not allowed in window specification
Window frame is not allowed with '%s'
No order list in window specification for '%s'
RANGE-type frame requires ORDER BY clause with single sort key
Integer is required for ROWS-type frame
Numeric datatype is required for RANGE-type frame
Frame exclusion is not supported yet
This window function may not have a window frame
Argument of NTILE must be greater than 0
CONSTRAINT %s failed for %s.%s
Expression in the %s clause is too big
Got an error evaluating stored expression %s
Got an error when calculating default value for %s
Expression for field %s is referring to uninitialized field %s
Only one DEFAULT partition allowed
Referenced trigger '%s' for the given action time and event type does not exist
Default/ignore value is not supported for such parameter usage
Only row based replication supported for bulk operations
Uncompress the compressed binlog failed
Broken JSON string in argument %d to function '%s' at position %d
Character disallowed in JSON in argument %d to function '%s' at position %d
Unexpected end of JSON text in argument %d to function '%s'
Syntax error in JSON text in argument %d to function '%s' at position %d
Incorrect escaping in JSON text in argument %d to function '%s' at position %d
Limit of %d on JSON nested strucures depth is reached in argument %d to function '%s' at position %d
Unexpected end of JSON path in argument %d to function '%s'
Syntax error in JSON path in argument %d to function '%s' at position %d
Limit of %d on JSON path depth is reached in argument %d to function '%s' at position %d
Wildcards in JSON path not allowed in argument %d to function '%s'
JSON path should end with an array identifier in argument %d to function '%s'
Argument 2 to function '%s' must be "one" or "all"
CREATE TEMPORARY TABLE is not allowed with ROW_FORMAT=COMPRESSED or KEY_BLOCK_SIZE
Incorrect GeoJSON format specified for st_geomfromgeojson function
Incorrect GeoJSON format - too few points for linestring specified
Incorrect GeoJSON format - polygon not closed
Path expression '$' is not allowed in argument %d to function '%s'
A slave with the same server_uuid/server_id as this slave has connected to the master
Flashback does not support %s %s
Keys are out order during bulk load
Bulk load rows overlap existing rows
Can't execute updates on master with binlog_format != ROW
MyRocks supports only READ COMMITTED and REPEATABLE READ isolation levels. Please change from current isolation level %s
When unique checking is disabled in MyRocks, INSERT,UPDATE,LOAD statements with clauses that update or replace the key (i.e., INSERT ON DUPLICATE KEY UPDATE, REPLACE) are not allowed. Query: %s
Can't execute updates when you started a transaction with START TRANSACTION WITH CONSISTENT [ROCKSDB] SNAPSHOT
This transaction was rolled back and cannot be committed. Only supported operation is to roll it back, so all pending changes will be discarded. Please restart another transaction.
MyRocks currently does not support ROLLBACK TO SAVEPOINT if modifying rows
Only REPEATABLE READ isolation level is supported for START TRANSACTION WITH CONSISTENT SNAPSHOT in RocksDB Storage Engine
Unsupported collation on string indexed column %s Use binary collation (%s)
Table '%s' does not exist, but metadata information exists inside MyRocks. This is a sign of data inconsistency. Please check if '%s.frm' exists, and try to restore it if it does not exist.
Column family ('%s') flag (%d) is different from an existing flag (%d). Assign a new CF flag, or do not change existing CF flag.
TTL duration (%s) in MyRocks must be an unsigned non-null 64-bit integer
Status error %d received from RocksDB: %s
%s, Status error %d received from RocksDB: %s
TTL support is currently disabled when table has a hidden PK
TTL column (%s) in MyRocks must be an unsigned non-null 64-bit integer, exist inside the table, and have an accompanying ttl duration
The per-index column family option has been deprecated
MyRocks failed creating new key definitions during alter
MyRocks failed populating secondary key during alter
Window functions can not be used as arguments to group functions
OK packet too large
Incorrect GeoJSON format - empty 'coordinates' array
MyRocks doesn't currently support collations with "No pad" attribute
Only non-transactional Aria table can be used for logging
The following Error Codes are not present in MariaDB Community Server 10.2.43 but are present in one or more older 10.2 CS versions. Click on an item to see its details, including when it was removed.
BLOB/TEXT column '%s' can't have a default value
Data for column '%s' too long
Duplicate foreign key constraint name '%s'
A computed column cannot be based on a computed column
Function or expression is not allowed for column '%s'
Generated value for computed column '%s' cannot be converted to type '%s'
Primary key cannot be defined upon a computed column
Cannot define foreign key with %s clause on a computed column
The value specified for computed column '%s' in table '%s' ignored
This is not yet supported for computed columns
Constant expression in computed column function is not allowed
Expression for computed column cannot return a row
%s storage engine does not support computed columns
The definition of the table '%s' refers to the table '%s' defined later in a non-recursive WITH clause
Recursive queries in WITH clause are not supported yet
Incorrect tablespace name %s
Restrictions imposed on recursive definitions are violated for table '%s'