InnoDB Online DDL Overview
MariaDB starting with 10.0
InnoDB tables support online DDL, which permits concurrent DML and uses optimizations to avoid unnecessary table copying.
Contents
In MariaDB 10.0 and later, the ALTER TABLE
statement supports two clauses that are used to implement online DDL:
ALGORITHM
- This clause controls how the DDL operation is performed.LOCK
- This clause controls how much concurrency is allowed while the DDL operation is being performed.
Alter Algorithms
In MariaDB 10.0 and later, InnoDB supports multiple algorithms for performing DDL operations. This offers a significant performance improvement over previous versions. The supported algorithms are:
DEFAULT
- This implies the default behavior for the specific operation.COPY
INPLACE
NOCOPY
- This was added in MariaDB 10.3.7.INSTANT
- This was added in MariaDB 10.3.7.
Specifying an Alter Algorithm
The set of alter algorithms can be considered as a hierarchy. The hierarchy is ranked in the following order, with least efficient algorithm at the top, and most efficient algorithm at the bottom:
COPY
INPLACE
NOCOPY
INSTANT
When a user specifies an alter algorithm for a DDL operation, MariaDB does not necessarily use that specific algorithm for the operation. It interprets the choice in the following way:
- If the user specifies
COPY
, then InnoDB uses theCOPY
algorithm. - If the user specifies any other algorithm, then InnoDB interprets that choice as the least efficient algorithm that the user is willing to accept. This means that if the user specifies
INPLACE
, then InnoDB will use the most efficient algorithm supported by the specific operation from the set (INPLACE
,NOCOPY
,INSTANT
). Likewise, if the user specifiesNOCOPY
, then InnoDB will use the most efficient algorithm supported by the specific operation from the set (NOCOPY
,INSTANT
).
There is also a special value that can be specified:
- If the user specifies
DEFAULT
, then InnoDB uses its default choice for the operation. The default choice is to use the most efficient algorithm supported by the operation. The default choice will also be used if no algorithm is specified. Therefore, if you want InnoDB to use the most efficient algorithm supported by an operation, then you usually do not have to explicitly specify any algorithm at all.
Specifying an Alter Algorithm Using the ALGORITHM
Clause
MariaDB starting with 10.0
In MariaDB 10.0 and later, InnoDB supports the ALGORITHM
clause.
The ALGORITHM
clause can be used to specify the least efficient algorithm that the user is willing to accept. It is supported by the ALTER TABLE
and CREATE INDEX
statements.
For example, if a user wanted to add a column to a table, but only if the operation used an algorithm that is at least as efficient as the INPLACE
, then they could execute the following:
CREATE OR REPLACE TABLE tab ( a int PRIMARY KEY, b varchar(50) ); ALTER TABLE tab ADD COLUMN c varchar(50), ALGORITHM=INPLACE;
In MariaDB 10.3 and later, the above operation would actually use the INSTANT
algorithm, because the ADD COLUMN
operation supports the INSTANT
algorithm, and the INSTANT
algorithm is more efficient than the INPLACE
algorithm.
Specifying an Alter Algorithm Using System Variables
MariaDB starting with 10.3
In MariaDB 10.3 and later, the alter_algorithm
system variable can be used to pick the least efficient algorithm that the user is willing to accept.
For example, if a user wanted to add a column to a table, but only if the operation used an algorithm that is at least as efficient as the INPLACE
, then they could execute the following:
CREATE OR REPLACE TABLE tab ( a int PRIMARY KEY, b varchar(50) ); SET SESSION alter_algorithm='INPLACE'; ALTER TABLE tab ADD COLUMN c varchar(50);
In MariaDB 10.3 and later, the above operation would actually use the INSTANT
algorithm, because the ADD COLUMN
operation supports the INSTANT
algorithm, and the INSTANT
algorithm is more efficient than the INPLACE
algorithm.
MariaDB until 10.2
In MariaDB 10.2 and before, the old_alter_table
system variable can be used to specify whether the COPY
algorithm should be used.
For example, if a user wanted to add a column to a table, but they wanted to use the COPY
algorithm instead of the default algorithm for the operation, then they could execute the following:
CREATE OR REPLACE TABLE tab ( a int PRIMARY KEY, b varchar(50) ); SET SESSION old_alter_table=1; ALTER TABLE tab ADD COLUMN c varchar(50);
Supported Alter Algorithms
The supported algorithms are described in more details below.
DEFAULT
Algorithm
The default behavior, which occurs if ALGORITHM=DEFAULT
is specified, or if ALGORITHM
is not specified at all, usually only makes a copy if the operation doesn't support being done in-place at all. In this case, the most efficient available algorithm will usually be used.
This means that, if an operation supports the INSTANT
algorithm, then it will use that algorithm by default. If an operation does not support the INSTANT
algorithm, but it does support the NOCOPY
algorithm, then it will use that algorithm by default. If an operation does not support the NOCOPY
algorithm, but it does support the INPLACE
algorithm, then it will use that algorithm by default.
COPY
Algorithm
MariaDB starting with 10.0
In MariaDB 10.0 and later, the COPY
algorithm refers to the original ALTER TABLE
algorithm.
When the COPY
algorithm is used, MariaDB essentially does the following operations:
-- Create a temporary table with the new definition CREATE TEMPORARY TABLE tmp_tab ( ... ); -- Copy the data from the original table INSERT INTO tmp_tab SELECT * FROM original_tab; -- Drop the original table DROP TABLE original_tab; -- Rename the temporary table, so that it replaces the original one RENAME TABLE tmp_tab TO original_tab;
This algorithm is very inefficient, but it is generic, so it works for all storage engines.
If the COPY
algorithm is specified with the ALGORITHM
clause or with the alter_algorithm
system variable, then the COPY
algorithm will be used even if it is not necessary. This can result in a lengthy table copy. If multiple ALTER TABLE
operations are required that each require the table to be rebuilt, then it is best to specify all operations in a single ALTER TABLE
statement, so that the table is only rebuilt once.
Using the COPY
Algorithm with InnoDB
If the COPY
algorithm is used with an InnoDB table, then the following statements apply:
- The table will be rebuilt using the current values of the
innodb_file_per_table
,innodb_file_format
, andinnodb_default_row_format
system variables.
- The operation will have to create a temporary table to perform the the table copy. This temporary table will be in the same directory as the original table, and it's file name will be in the format
, where#
sql${PID}_${THREAD_ID}_${TMP_TABLE_COUNT}${PID}
is the process ID ofmysqld
,${THREAD_ID}
is the connection ID, and${TMP_TABLE_COUNT}
is the number of temporary tables that the connection has open. Therefore, thedatadir
may contain files with file names like
.#
sql1234_12_1.ibd
- The operation inserts one record at a time into each index, which is very inefficient.
- InnoDB does not use a sort buffer.
- In MariaDB 10.2.13, MariaDB 10.3.5 and later, the table copy operation creates a lot fewer InnoDB undo log writes. See MDEV-11415 for more information.
- The table copy operation creates a lot of InnoDB redo log writes.
INPLACE
Algorithm
MariaDB starting with 10.0
In MariaDB 10.0 and later, the INPLACE
algorithm is supported.
The COPY
algorithm can be incredibly slow, because the whole table has to be copied and rebuilt. The INPLACE
algorithm was introduced as a way to avoid this by performing operations in-place and avoiding the table copy and rebuild, when possible.
When the INPLACE
algorithm is used, the underlying storage engine uses optimizations to perform the operation while avoiding the table copy and rebuild. However, INPLACE
is a bit of a misnomer, since some operations may still require the table to be rebuilt for some storage engines. Regardless, several operations can be performed without a full copy of the table for some storage engines.
A more accurate name for the algorithm would have been the ENGINE
algorithm, since the storage engine decides how to implement the algorithm.
If an ALTER TABLE
operation supports the INPLACE
algorithm, then it can be performed using optimizations by the underlying storage engine, but it may rebuilt.
If the INPLACE
algorithm is specified with the ALGORITHM
clause or with the alter_algorithm
system variable and if the ALTER TABLE
operation does not support the INPLACE
algorithm, then an error will be raised. For example:
SET SESSION alter_algorithm='INPLACE'; ALTER TABLE tab MODIFY COLUMN c int; ERROR 1846 (0A000): ALGORITHM=INPLACE is not supported. Reason: Cannot change column type INPLACE. Try ALGORITHM=COPY
In this case, raising an error is preferable, if the alternative is for the operation to make a copy of the table, and perform unexpectedly slowly.
Using the INPLACE
Algorithm with InnoDB
If the INPLACE
algorithm is used with an InnoDB table, then the following statements apply:
- The operation might have to write sort files in the directory defined by the
innodb_tmpdir
system variable.
- The operation might also have to write a temporary log file to track data changes by DML queries executed during the operation. The maximum size for this log file is configured by the
innodb_online_alter_log_max_size
system variable.
- Some operations require the table to be rebuilt, even though the algorithm is inaccurately called "in-place". This includes operations such as adding or dropping columns, adding a primary key, changing a column to
NULL
, etc.
- If the operation requires the table to be rebuilt, then the operation might have to create temporary tables.
- It may have to create a temporary intermediate table for the actual table rebuild operation.
- In MariaDB 10.2.19 and later, this temporary table will be in the same directory as the original table, and it's file name will be in the format
, where#
sql${PID}_${THREAD_ID}_${TMP_TABLE_COUNT}${PID}
is the process ID ofmysqld
,${THREAD_ID}
is the connection ID, and${TMP_TABLE_COUNT}
is the number of temporary tables that the connection has open. Therefore, thedatadir
may contain files with file names like
.#
sql1234_12_1.ibd - In MariaDB 10.2.18 and before, this temporary table will be in the same directory as the original table, and it's file name will be in the format
, where#
sql-ib${TABLESPACE_ID}-${RAND}${TABLESPACE_ID}
is the table's tablespace ID within InnoDB and${RAND}
is a randomly initialized number. Therefore, thedatadir
may contain files with file names like
.#
sql-ib230291-1363966925.ibd
- In MariaDB 10.2.19 and later, this temporary table will be in the same directory as the original table, and it's file name will be in the format
- When it replaces the original table with the rebuilt table, it may also have to rename the original table using a temporary table name.
- If the server is MariaDB 10.3 or later or if it is running MariaDB 10.2 and the
innodb_safe_truncate
system variable is set toOFF
, then the format will actually be
, where#
sql-ib${TABLESPACE_ID}-${RAND}${TABLESPACE_ID}
is the table's tablespace ID within InnoDB and${RAND}
is a randomly initialized number. Therefore, thedatadir
may contain files with file names like
.#
sql-ib230291-1363966925.ibd - If the server is running MariaDB 10.1 or before or if it is running MariaDB 10.2 and the
innodb_safe_truncate
system variable is set toON
, then the renamed table will have a temporary table name in the format
, where#
sql-ib${TABLESPACE_ID}${TABLESPACE_ID}
is the table's tablespace ID within InnoDB. Therefore, thedatadir
may contain files with file names like
.#
sql-ib230291.ibd
- If the server is MariaDB 10.3 or later or if it is running MariaDB 10.2 and the
- It may have to create a temporary intermediate table for the actual table rebuild operation.
- The storage needed for the above items can add up to the size of the original table, or more in some cases.
- Some operations are instantaneous, if they only require the table's metadata to be changed. This includes operations such as renaming a column, changing a column's
DEFAULT
value, etc.
Operations Supported by InnoDB with the INPLACE
Algorithm
With respect to the allowed operations, the INPLACE
algorithm supports a subset of the operations supported by the COPY
algorithm, and it supports a superset of the operations supported by the NOCOPY
algorithm.
See InnoDB Online DDL Operations with ALGORITHM=INPLACE for more information.
NOCOPY
Algorithm
MariaDB starting with 10.3
In MariaDB 10.3 and later, the NOCOPY
algorithm is supported.
The INPLACE
algorithm can sometimes be surprisingly slow in instances where it has to rebuild the clustered index, because when the clustered index has to be rebuilt, the whole table has to be rebuilt. The NOCOPY
algorithm was introduced as a way to avoid this.
If an ALTER TABLE
operation supports the NOCOPY
algorithm, then it can be performed without rebuilding the clustered index.
If the NOCOPY
algorithm is specified with the ALGORITHM
clause or with the alter_algorithm
system variable and if the ALTER TABLE
operation does not support the NOCOPY
algorithm, then an error will be raised. For example:
SET SESSION alter_algorithm='NOCOPY'; ALTER TABLE tab MODIFY COLUMN c int; ERROR 1846 (0A000): ALGORITHM=NOCOPY is not supported. Reason: Cannot change column type INPLACE. Try ALGORITHM=COPY
In this case, raising an error is preferable, if the alternative is for the operation to rebuild the clustered index, and perform unexpectedly slowly.
Operations Supported by InnoDB with the NOCOPY
Algorithm
With respect to the allowed operations, the NOCOPY
algorithm supports a subset of the operations supported by the INPLACE
algorithm, and it supports a superset of the operations supported by the INSTANT
algorithm.
See InnoDB Online DDL Operations with ALGORITHM=NOCOPY for more information.
INSTANT
Algorithm
MariaDB starting with 10.3
In MariaDB 10.3 and later, the INSTANT
algorithm is supported.
The INPLACE
algorithm can sometimes be surprisingly slow in instances where it has to modify data files. The INSTANT
algorithm was introduced as a way to avoid this.
If an ALTER TABLE
operation supports the INSTANT
algorithm, then it can be performed without modifying any data files.
If the INSTANT
algorithm is specified with the ALGORITHM
clause or with the alter_algorithm
system variable and if the ALTER TABLE
operation does not support the INSTANT
algorithm, then an error will be raised. For example:
SET SESSION alter_algorithm='INSTANT'; ALTER TABLE tab MODIFY COLUMN c int; ERROR 1846 (0A000): ALGORITHM=INSTANT is not supported. Reason: Cannot change column type INPLACE. Try ALGORITHM=COPY
In this case, raising an error is preferable, if the alternative is for the operation to modify data files, and perform unexpectedly slowly.
Operations Supported by InnoDB with the INSTANT
Algorithm
With respect to the allowed operations, the INSTANT
algorithm supports a subset of the operations supported by the NOCOPY
algorithm.
See InnoDB Online DDL Operations with ALGORITHM=INSTANT for more information.
Alter Locking Strategies
In MariaDB 10.0 and later, InnoDB supports multiple locking strategies for performing DDL operations. This offers a significant performance improvement over previous versions. The supported locking strategies are:
DEFAULT
- This implies the default behavior for the specific operation.NONE
SHARED
EXCLUSIVE
Regardless of which locking strategy is used to perform a DDL operation, InnoDB will have to exclusively lock the table for a short time at the start and end of the operation's execution. This means that any active transactions that may have accessed the table must be committed or aborted for the operation to continue. This applies to most DDL statements, such as ALTER TABLE
, CREATE INDEX
, DROP INDEX
, OPTIMIZE TABLE
, RENAME TABLE
, etc.
Specifying an Alter Locking Strategy
Specifying an Alter Locking Strategy Using the LOCK
Clause
MariaDB starting with 10.0
In MariaDB 10.0 and later, the ALTER TABLE
statement supports the LOCK
clause.
The LOCK
clause can be used to specify the locking strategy that the user is willing to accept. It is supported by the ALTER TABLE
and CREATE INDEX
statements.
For example, if a user wanted to add a column to a table, but only if the operation is non-locking, then they could execute the following:
CREATE OR REPLACE TABLE tab ( a int PRIMARY KEY, b varchar(50) ); ALTER TABLE tab ADD COLUMN c varchar(50), ALGORITHM=INPLACE, LOCK=NONE;
If the LOCK
clause is not explicitly set, then the operation uses LOCK=DEFAULT
.
Specifying an Alter Locking Strategy Using ALTER ONLINE TABLE
ALTER ONLINE TABLE
is equivalent to LOCK=NONE
. Therefore, the ALTER ONLINE TABLE
statement can be used to ensure that your ALTER TABLE
operation allows all concurrent DML.
Supported Alter Locking Strategies
The supported algorithms are described in more details below.
To see which locking strategies InnoDB supports for each operation, see the pages that describe which operations are supported for each algorithm:
- InnoDB Online DDL Operations with ALGORITHM=INPLACE
- InnoDB Online DDL Operations with ALGORITHM=NOCOPY
- InnoDB Online DDL Operations with ALGORITHM=INSTANT
DEFAULT
Locking Strategy
The default behavior, which occurs if LOCK=DEFAULT
is specified, or if LOCK
is not specified at all, acquire the least restrictive lock on the table that is supported for the specific operation. This permits the maximum amount of concurrency that is supported for the specific operation.
NONE
Locking Strategy
The NONE
locking strategy performs the operation without acquiring any lock on the table. This permits all concurrent DML.
If this locking strategy is not permitted for an operation, then an error is raised.
SHARED
Locking Strategy
The SHARED
locking strategy performs the operation after acquiring a read lock on the table. This permit read-only concurrent DML.
If this locking strategy is not permitted for an operation, then an error is raised.
EXCLUSIVE
Locking Strategy
The EXCLUSIVE
locking strategy performs the operation after acquiringa write lock on the table. This does not permit concurrent DML.