Node.js, MariaDB and GIS
The availability of the node.js binding for MariaDB’s non-blocking client library together with the GIS capabilities of MariaDB inspired me to make an example of using node.js and MariaDB to import so-called GPX tracks to a MariaDB database and then show them on a map. GPX tracks are what are stored by many GPS devices including running watches and smartphones. My project makes use of MariaDB’s non-blocking client library together with the node.js platform and on top of that uses the GIS functionality found in MariaDB 5.5 and 10.0. To start with let’s go through the software and components I’m using:
- Node.js – The popular Node.js platform built on Chrome’s JavaScript runtime. An event-driven and non-blocking architecture
- Express.js – a web application framework for node.js (similar to Sinatra in Ruby). Puts a nice structure on the application and makes configuration easy
- Jade – A node.js template engine for outputting in most cases HTML, but can also be used for other XML structured languages
- node-mariasql – A node.js binding to MariaDB’s non-blocking (MySQL-compatible) client library created by Brian White
- xml2js – Node module for parsing XML
- Google Maps – To show the end result on a map
The source code for my application can be found on Github:https://github.com/rasmushoj/nodejs-gpx-mariadb I’ve licensed it under the MIT license, so feel free to grab it, copy it, reuse it or distribute it. If you build on top of it, it would of course be nice to know and it would appreciated if you dropped an email to me or added a comment here.
Installing the platform
I chose to use Ubuntu 13.10 x64 as the OS for the application. Below is outlined the steps for installing each of the components needed for this application. Before I begin going through them it’s always good to create a new OS user and not run as root. adduser is handy for the purpose. Remember also to add the user to the sudo group if you’re going to make the installation with this new user. In my case I chose to “sudo adduser rasmus sudo”. Install MariaDB 10.0 by following the instructions found on the downloads repository for MariaDB. Remember to choose the right Ubuntu release on that page, which in my case is 13.10 “saucy”. Then follow the instructions on the page. While doing this tutorial the version of MariaDB getting installed was 10.0.7. The application uses MariaDB’s root user with password password1 so you might want to do the same to get this example working without code changes. Create a database named running with the following commands:
mysql -u root -p MariaDB [(none)]> create database running;
In the GitHub repository for the application you’ll find running.sql in the root. Run that with the following command on the server to create the schema for the running -database:
mysql -u root -p running Prepare the environment: Update the apt repository: sudo apt-get update Install a compiler: sudo apt-get install build-essential Install curl which will be needed when installing node.js: sudo apt-get install curl Install node.js and Node Package Manager (NPM): sudo apt-get install nodejs sudo apt-get install nodejs-legacy sudo apt-get install npm Install Express.js and Jade: npm install express npm install jade Install the MariaDB non-blocking client: npm install mariasql (there might be a few compiler warnings, I at least had a few) Finally install the xml2js module which we will need: npm install xml2js With that done, the platform is set up and the next step is to create an Express.js web application by running the command express nodegpxmariadb, where nodegpxmariadb is the name of the web application. I did it in the home directory of my user. Go to the nodegpxmariadb -directory and make sure all required modules are installed by running npm install.
Configuring the application
In app.js a few different things are specified. All module dependencies are listed. For my application the two additions to the normal modules set up by express.js is a data.js and a common.js module in which I’ve put all the database handling. The module dependency is defined by adding these rows:
var common = require('./routes/common');
var data = require('./data.js');
Now the common and data modules are available throughout the application. Common follows the principles of the express.js framework and is done as a so-called route which include the logic for url path mappings mentioned below. The default express.js environment configurations are in use like the server running on port 3000. Make sure JSON support is on. It should be there by default:
app.use(express.json());
Another configuration needed is to tell express.js where to store uploaded files:
app.use(express.bodyParser({ keepExtensions: true, uploadDir: __dirname + '/public/uploads' }));
In addition app.js is the place where all the URL path mappings are defined. The following are needed:
app.get('/upload', common.fileForm);
app.post('/upload', common.fileUpload);
app.get('/readfile', common.readFile);
app.get('/parsegpx', common.parseGPX);
app.get('/track', common.listPoints);
app.get('/showmap', function (req, res) {
res.sendfile(__dirname + '/views/maps.html');
});
As you can see most of the url path mappings point to the common module, where it’s defined what to do when there is an incoming request for the url path. For /showmap there is no server side logic needed so an html file can just be read and sent to the client.
Start the application
With the configuration in place the application can be started:
rasmus@rasdo1:~$ cd nodegpxmariadb/ rasmus@rasdo1:~/nodegpxmariadb$ node app connect.multipart() will be removed in connect 3.0 visit https://github.com/senchalabs/connect/wiki/Connect-3.0 for alternatives connect.limit() will be removed in connect 3.0 Express server listening on port 3000
You should see a “Welcome to Express” -message if you open up the http://[server ip]:3000 in a browser.
Upload GPX file
Let’s take a closer look at what actually is done in the common.js module. Let’s start with the upload part. Exports.fileForm and exports.fileUpload are handling the displaying of an upload form and respectively actually doing the upload of the file chosen by the user.
Parse GPX file
Once a file has been uploaded it gets more interesting. This is when the parsing of a GPX file starts. GPX files are full of tracking points with a certain interval. For example:
<trkpt lon="24.8374462127686009" lat="60.1847839355469034">
<ele&mt4.4632568359375</ele>
<time&mt2013-09-21T12:00:11.000Z</time>
<extensions>
<gpxtpx:TrackPointExtension>
<gpxtpx:hr&mt137</gpxtpx:hr>
</gpxtpx:TrackPointExtension>
</extensions>
</trkpt>
<trkpt lon="24.8374595642089986" lat="60.1846923828125000">
<ele&mt4.4632568359375</ele>
<time&mt2013-09-21T12:00:14.000Z</time>
<extensions>
<gpxtpx:TrackPointExtension>
<gpxtpx:hr&mt146</gpxtpx:hr>
</gpxtpx:TrackPointExtension>
</extensions>
</trkpt>
As seen above each track point is its own XML node, which holds the longitude and latitude coordinates, elevation, time and some other interesting information such as heart rate. An easy way to handle XML of this type (or in general) is to make use of the node.js library xml2js which parses XML and outputs JSON. It’s very straightforward. I make use of it in in the parseGPX –function. When we have the GPX content in JSON it’s time to extract the track points and insert them into a MariaDB database. We start by calling the connect –method of the data –module to get a connection to MariaDB. After that we iterate over the JSON contents:
for(var i in json.gpx.trk[0].trkseg[0].trkpt) {
lon = json.gpx.trk[0].trkseg[0].trkpt[i].$.lon;
lat = json.gpx.trk[0].trkseg[0].trkpt[i].$.lat;
data.insertPoint(lon, lat);
}
The lon variable holds the longitude coordinate of the trackpoint and lat the latitude. Unfortunately MariaDB doesn’t yet support the 3rd coordinate in GIS, elevation, otherwise we could have added it also. The lon and lat are given to the data.insertPoint –method which stores them as a GIS Point in the database:
client.query('INSERT INTO trackpoints (gpsPoint) VALUES (PointFromText(:loc))', { loc: 'POINT(' + lon + " " + lat + ')' })
Make sure you check out the data.js file for how to connect and disconnect to MariaDB. 
Show on map
The final thing I wanted to do was to see how easily I could plot the stored GIS points on a map. To start with we need to retrieve all the GIS points from the database, which is done is data.js in the following way:
exports.getTrackPoints = function(trackId, httpRes) {
var xys = [];
client.query('SELECT X(GeomFromText(AsText(gpsPoint))) AS X, Y(GeomFromText(AsText(gpsPoint))) AS Y FROM trackpoints WHERE trackId = :pTrackId', { pTrackId: trackId })
.on('result', function(res) {
res.on('row', function(row) {
xys.push(row);
})
.on('error', function(err) {
console.log('Result error: ' + inspect(err));
})
.on('end', function(info) {
console.log('Result finished successfully');
});
})
.on('end', function() {
httpRes.send(xys);
});
}
From the above we can see that an array is built which is passed directly as an http response and of course by default in JSON format. This is very good for Google Maps which now can point to a URL, which in this case is /track and read the JSON formatted array of points from there and plot a so-called Polyline connecting each of the points to a nice track. A lot more could of course be done when having the GIS points stored in the database, including:
- distances could be counted
- I could view which of my runs that intersect with each other (well this is actually a MariaDB 10.1 feature since INTERSECT will be introduced there)
- count how many of my runs are inside a certain area
- time could be added so that duration and pace could be measured
To sum it up, I would say that whenever you think about creating your next app, being it a web application or a smartphone app with the need of a back-end node.js + MariaDB is a great choice and all the pieces needed are available. You’ll have a full blown and proven RDBMS backing up your application. Also location awareness and other geographical functionality seems to be almost mandatory in new development. MariaDB includes quite a nice (and properly implemented) set of spatial data types, GIS functions and other relevant functionality.
